2 ms·
I've never actually looked at what an EMP does to kill electronics. I've just taken it as bad. Does it really just create an overload that fries the electronics
by dylan604 3y ago
I've never actually looked at what an EMP does to kill electronics. I've just taken it as bad. Does it really just create an overload that fries the electronics so that a nice surge protector keeps it safe? The thing you describe basically sounds like some sort of shunt for excess to go to ground.
- willis936 3y agoThat's exactly what lightning protection modules are. They are just transient voltage suppressors (TVS, just some diodes) tied to ground.
- civilitty 3y agoI don't think that works with EMPs since the pulse will induce a current in the protected circuit just as much as the path to ground, unless that path to ground is a full shield around the circuit.
- mlyle 3y agoYes— big radio signals induce big voltages on long wires, which can do things like melt the input structure on ICs. Issues with this: Adding a long wire to your protection device isn’t going to do much. Signals, not power, are the biggest concern in cars. You really need protection at the ingress of each device, and shielding of individual enclosures, to be effective.
- MisterTea 3y ago> I've never actually looked at what an EMP does to kill electronics. Ever see the school experiments where a magnet is waved by a coil of wire hooked to a volt meter which registers voltage and therefor current flow? That is how generators work - spin a big magnet in a big coil of wire and that generates lots of electricity. Moving a wire through a magnetic field induces current flow if there is a complete circuit. Now picture your smart phone, laptop, PC, console, car, etc, anything with wires or conductors - and now wave a really really really BIG magnet next to it. That can induce currents so large that the wiring can melt, semiconductors vaporized or melted, chip bonding wires vaporized, pcb traces vaporized, etc. Basically total destruction via a massive current/voltage spike. I read about an EMP test Russia conducted on a length of telephone wire which was placed next to a nuclear test site hooked to some instrumentation. I do not remember the exact numbers offhand but the EMP induced over 3000 amps on those little telephone wires for a few microseconds before they vaporized.