5 ms·

If you care about Sata3 interfaces, the Odroid HC4 has two of them with vertical disk holders. https://wiki.odroid.com/odroid-hc4/odroid-hc4 https://wiki.odroid

If you care about Sata3 interfaces, the Odroid HC4 has two of them with vertical disk holders. https://wiki.odroid.com/odroid-hc4/odroid-hc4 https://wiki.odroid.com/odroid-hc4/odroid-hc4 The one I'm using as home server is consuming 3.48 W now with a Samsung 850 SSD (1 TB.)

tarruda 3y ago
Very cool, but I really like wall-mounting these ARM SBC near my router. This one seems unfit for that purpose. The argon one raspberry pi 4 case is very good for wall mounting, though it connects with the m.2 drive via USB 3, which kinda sucks.
andruby 3y ago
I wanted to add the Odroid H3 here as well. I've got it running at 3~4W idle with a WD Black nvme m2 ssd. Standard x86 debian server installation. 16GB of sodimm ram (supports up to 64GB). 2x 2.5GbE ethernet. Passively cooled (fan optional). They sell enclosures with space for 2 disks. $129 (excl shipping) Great for samba shares and a bunch of containers. https://www.hardkernel.com/shop/odroid-h3/ https://www.hardkernel.com/shop/odroid-h3/
derekp7 3y ago
What speed can you get over ssh to that board? The big issue I had with the Raspberry Pi 4 when using it as a low-powered server is when I run my backups to it over ssh, the network transfers top out at about 20 MB/s (just raw transfer speed going to /dev/null) vs. around 100MB/s I get on a regular x86 board.
- pmontra 3y ago
  I benchmarked it right now by copying a 6.1 GB file with scp from my laptop to the HC4 SSD. It eventually peaked between 77 and 80 MB/s (that's a B for bytes.) I have a 1 Gigabit interface and a 10 Gb/s cable so it reasonably saturated the interface. There were maybe another 10 or 20 MB/s to squeeze from it but I won't complain. It took 1m 13s.
jefurii 3y ago
I like the specs on the HC4 but that form factor just invites passersby to yank out the drives.
- pmontra 3y ago
  A home server should not be concerned with passersbys.
  - msk-lywenn 3y ago
    A home server should really be concerned by cats

tarruda 3y ago

Very cool, but I really like wall-mounting these ARM SBC near my router. This one seems unfit for that purpose. The argon one raspberry pi 4 case is very good for wall mounting, though it connects with the m.2 drive via USB 3, which kinda sucks.

andruby 3y ago

I wanted to add the Odroid H3 here as well. I've got it running at 3~4W idle with a WD Black nvme m2 ssd. Standard x86 debian server installation. 16GB of sodimm ram (supports up to 64GB). 2x 2.5GbE ethernet. Passively cooled (fan optional). They sell enclosures with space for 2 disks. $129 (excl shipping) Great for samba shares and a bunch of containers. https://www.hardkernel.com/shop/odroid-h3/ https://www.hardkernel.com/shop/odroid-h3/

derekp7 3y ago

What speed can you get over ssh to that board? The big issue I had with the Raspberry Pi 4 when using it as a low-powered server is when I run my backups to it over ssh, the network transfers top out at about 20 MB/s (just raw transfer speed going to /dev/null) vs. around 100MB/s I get on a regular x86 board.

pmontra 3y ago
I benchmarked it right now by copying a 6.1 GB file with scp from my laptop to the HC4 SSD. It eventually peaked between 77 and 80 MB/s (that's a B for bytes.) I have a 1 Gigabit interface and a 10 Gb/s cable so it reasonably saturated the interface. There were maybe another 10 or 20 MB/s to squeeze from it but I won't complain. It took 1m 13s.

jefurii 3y ago

I like the specs on the HC4 but that form factor just invites passersby to yank out the drives.

pmontra 3y ago
A home server should not be concerned with passersbys.
- msk-lywenn 3y ago
  A home server should really be concerned by cats