3 ms·
You cannot have 90 degrees in your mold. For the mold to exit your plastic part, it needs to have a slight angle of a few degrees. This is known as "draft": h
by userbinator 3y ago
You cannot have 90 degrees in your mold. For the mold to exit your plastic part, it needs to have a slight angle of a few degrees.
This is known as "draft":
https://en.wikipedia.org/wiki/Draft_(engineering) https://en.wikipedia.org/wiki/Draft_(engineering)
I'm more familiar with metal casting, but plastic injection molding seems to have a lot of similarities, such as shrinkage and flow considerations.
- deleted 3y ago[deleted]
- justinator 3y agoThe way Lego bricks are injection molded is quite fascinating.
- jdblair 3y agoThis was famously an issue with the original NeXT Cube: Recounted in an article in Fast Company: As Isaacson relates in Steve Jobs, most parts cast in molds have an angle that is slightly greater than 90 degrees, because the extra degrees make it much easier to get the parts out of the mold. That’s the kind of compromise neither Esslinger or Jobs was willing to make for the NeXT, arguing it would ruin the “purity and perfection” of the NeXT cube. So the sides had to be produced separately, using molds that cost $650,000, at a specialty machine shop in Chicago. https://www.fastcompany.com/3056684/remembering-the-design-legacy-of-steve-jobss-other-great-computer-company https://www.fastcompany.com/3056684/remembering-the-design-l...:
- SoftTalker 3y agoGave up on that with the first generation of iMacs. Not a right angle to be found, all curves and plastic.
- car 3y agoThis was also the case with the 1st gen version of the iPod Shuffle [0], as a friend who worked at IDEO at the time pointed out. Perfect 90 degree angles. [0] https://support.apple.com/en-us/HT204217 https://support.apple.com/en-us/HT204217
- Kon-Peki 3y ago> using molds that cost $650,000, at a specialty machine shop Just because the mold was really expensive doesn't mean that the marginal cost of each unit created by it is more than a unit produced by a cheap mold. In many cases, the marginal cost is significantly less as you are able to use less raw material thanks to variable thicknesses, etc. There's a break-even point where the expensive mold becomes cheaper/better and that's another area where experienced manufacturing consultants help out.
- moring 3y agoDo you know if this is explained in detail somewhere? Both Wikipedia (English / German) and various websites only repeat that you need an angle "to lift the mold and to avoid stress cracks", but none seems to explain why. (My guess for the "exit" part is friction due to imperfect mold/part surfaces, but so far I can only guess)
- userbinator 3y agoYes, friction, also exacerbated by shrinkage during cooling.
- unleaded 3y agoEngineerguy explains it pretty well: https://youtu.be/RMjtmsr3CqA?t=391 https://youtu.be/RMjtmsr3CqA?t=391
- mips_r4300i 3y agoShort answer is 3 degrees draft is pretty safe most of the time, assuming you have some texturing. A shallower texture means you can get away with a bit less draft and vice versa. The reason is that you want the tool to release the piece and not get bound up. Shape and cooling also factor in, but for simple box type shapes with no large cutouts, this is usually predictable.