3 ms·
Someone explained cold welding to me this way: "So you have 2 pieces of metal pressed together. How does an atom know which piece it belongs to?" Oh. I know t
by kstrauser 3y ago
Someone explained cold welding to me this way:
"So you have 2 pieces of metal pressed together. How does an atom know which piece it belongs to?"
Oh. I know there's more to it than that, but that unblocked my understanding of it.
- thsksbd 3y agoBy the massive free volume between them. Even if you clamp the two metals together tightly, unless the surfaces are atomically smooth you'll get void spaces that are large kinetic barriers. Even if you are dealing with atomically smooth surfaces, you'll get a grain boundary which is still a kinetic barrier, and a large grain boundary too. That being said, your friend's point is still fundamentally valid - why wouldn't an atom on occasion cross the boundary and switch sides?
- Brian_K_White 3y agoAnd yet, vacuum-welding is a long known actual thing, and even without vacuum right in ordinary human environment, by good, non-trivial, but not magical surface prep. But it's probably more than just proximity. In vacuum there is probably also evaporation and a form of electrolosis.
- TheSpiceIsLife 3y agoNo that huge a void. Optically flat polished metals, such as guage blocks, will form a few metallic bonds when pressed together.
- thsksbd 3y agoOf course, but the OP asked what distinguishes one group of, say, Al metals in one work piece from another --> The void and xtal misalignment.
- lstodd 3y agoOptically flat isn't even needed per se. You can weld metals by slipping two blocks a bit under pressure side by side just like that in standard atmosphere, and when there's some sort of low-pressure environment it just takes that much less of a slip. No need to go down to space-grade vacuum at all.
- ortusdux 3y agoSurprisingly, explosive welding is considered to be a cold welding process. Explosives are used to overcome the limitations you describe.
- vGPU 3y agoIn atmosphere, most common metals will have a layer of oxide or contamination on the surface. This process is also known as diffusion bonding.
- ortusdux 3y agoThat is similar to how Feynman explained it in his Lectures: “The reason for this unexpected behavior is that when the atoms in contact are all of the same kind, there is no way for the atoms to ‘know’ that they are in different pieces of copper. When there are other atoms, in the oxides and greases and more complicated thin surface layers of contaminants in between, the atoms ‘know’ when they are not on the same part.”