There's virtually nothing on this, I guess nobody cares enough about IPv6 to spend time to actively remove IPv4 on their home. I did it, mostly for fun and beca

There's virtually nothing on this, I guess nobody cares enough about IPv6 to spend time to actively remove IPv4 on their home. I did it, mostly for fun and because I hate managing a dual stack: I have been running a 100% IPv6-only network at home for a couple of years, now. It works by having several IPv6-only subnets and a dual stack router (running openwrt) that performs stateful NAT64 [1] using Jool. This allows to access both the IPv4 internet and local IPv4 islands[2] (basically old devices like printers). There's no DHCP or NAPT involved: the router gets a /56 prefix from the ISP and performs prefix delegation, so every device does SLAAC and assigns itself a fully routable IPv6 address. For DNS I use dnscrypt-proxy2: it's very easy to set up and it can do DNS64 and static hostnames mapping. Since prefix is stable, I just assign names to the stable EUI-64 addresses of the hosts I care about. Alternatively you can use bind for DNS64 and mDNS if you don't like manually assigning names. There's also a script to automatically assigns names based on ICMPv6 neighbours discovery [3]. I also host some services on the IPv4 internet from IPv6-only hosts: for this you need the NAT64 equivalent of port forwarding, which is setting up static BIB entries [4]. [1]: https://nicmx.github.io/Jool/en/intro-xlat.html#stateful-nat64 https://nicmx.github.io/Jool/en/intro-xlat.html#stateful-nat... [2]: https://ungleich.ch/u/blog/managing-ipv4-islands-with-jool-and-openwrt/ https://ungleich.ch/u/blog/managing-ipv4-islands-with-jool-a... [3]: https://github.com/AndreBL/ip6neigh/ https://github.com/AndreBL/ip6neigh/ [4]: https://nicmx.github.io/Jool/en/bib.html https://nicmx.github.io/Jool/en/bib.html