3 ms·

I’ve purchased a few HP Elitedesk 800 G3 Minis (refurbished) for about $125 on Amazon. They even come with Windows 10 if you’re looking for that. They’re a deal

I’ve purchased a few HP Elitedesk 800 G3 Minis (refurbished) for about $125 on Amazon. They even come with Windows 10 if you’re looking for that. They’re a deal considering the Pi’s extra expenses like power, case, storage, etc.

gmac 3y ago
Similarly, I got a ThinkCentre M73 (8GB/128GB, Win10) on eBay for £125 3 years ago. It's great.
vladvasiliu 3y ago
I love the principle of the mini elitedesks, but some have a terribly annoying fan. It's not firmly attached to the chassis, so it rattles while spinning (and it spins all the time). The heatsink uses a proprietary 3 point attachment, so you can't use a big aftermarket cooler instead (even though it wouldn't fit in the case, I would have accepted the compromise). Not sure about the <=G3 and >=G7, but the G4 and G5 have the issue. The G6 seems to have the fan attached more firmly, but I've never tested one in a quiet room.
hypercube33 3y ago
Hp Elitedesk and prodesk are the two 1L available models they have you want to hunt for. Lenovo has M700, M75q (AMD) and a bunch others ranging from thin client to workstation performance. Generally new ones are awesome at about $700 but older ones are absolutely capable for upgrading ram, disk, wifi whatever. there are modules for up to 10g and other things too. Servethehome on YouTube has a bunch of guides.
wdfx 3y ago
Some Dell Optiplex models are also much like this. I have a refurbed one I got for <£200 running services here at home (core i5, 16GB).
Damogran6 3y ago
There is also a general improvement in code support by sticking with x86. I bought a similar 10 year old i5 based workstation dell and so many little things just work _better_. I didn't realize just how much of my battles were based on hardware architecture issues.
- pleoxy 3y ago
  Agreed, burns so much time messing around with arm and the limited IO suite.
darkwater 3y ago
I did something similar too, just beware of refurbishers putting cheap/trash SSD disks in those machine, they can stop working all of a sudden sooner than later (I experienced that on my skin)
rdschouw 3y ago
Power consumption is a consideration though depending on your use case and setup. A Pi 4 draws about 3W on light load and these G3 Minis take 10-12W. Of course if you deck out a Pi 4 with a SSD and a fan, it'll come much closer to the G3 Mini in terms of power consumption.
- pleoxy 3y ago
  The Dell wyse 5070 idles close to 3-5 watts. A bit more than the pi, but pretty close. It's older now, can be picked up cheaper than a pi off eBay. DDR 4, sata m.2, on board emmc flash. M.2 a-key for WiFi. Max 16GB ram. When you throw in m.2, lots of ram, all that IO eats power. So the minimum idle power creeps up. Arm boards too.

gmac 3y ago

Similarly, I got a ThinkCentre M73 (8GB/128GB, Win10) on eBay for £125 3 years ago. It's great.

vladvasiliu 3y ago

I love the principle of the mini elitedesks, but some have a terribly annoying fan. It's not firmly attached to the chassis, so it rattles while spinning (and it spins all the time). The heatsink uses a proprietary 3 point attachment, so you can't use a big aftermarket cooler instead (even though it wouldn't fit in the case, I would have accepted the compromise). Not sure about the <=G3 and >=G7, but the G4 and G5 have the issue. The G6 seems to have the fan attached more firmly, but I've never tested one in a quiet room.

hypercube33 3y ago

Hp Elitedesk and prodesk are the two 1L available models they have you want to hunt for. Lenovo has M700, M75q (AMD) and a bunch others ranging from thin client to workstation performance. Generally new ones are awesome at about $700 but older ones are absolutely capable for upgrading ram, disk, wifi whatever. there are modules for up to 10g and other things too. Servethehome on YouTube has a bunch of guides.

wdfx 3y ago

Some Dell Optiplex models are also much like this. I have a refurbed one I got for <£200 running services here at home (core i5, 16GB).

Damogran6 3y ago

There is also a general improvement in code support by sticking with x86. I bought a similar 10 year old i5 based workstation dell and so many little things just work _better_. I didn't realize just how much of my battles were based on hardware architecture issues.

pleoxy 3y ago
Agreed, burns so much time messing around with arm and the limited IO suite.

darkwater 3y ago

I did something similar too, just beware of refurbishers putting cheap/trash SSD disks in those machine, they can stop working all of a sudden sooner than later (I experienced that on my skin)

rdschouw 3y ago

Power consumption is a consideration though depending on your use case and setup. A Pi 4 draws about 3W on light load and these G3 Minis take 10-12W. Of course if you deck out a Pi 4 with a SSD and a fan, it'll come much closer to the G3 Mini in terms of power consumption.

pleoxy 3y ago
The Dell wyse 5070 idles close to 3-5 watts. A bit more than the pi, but pretty close. It's older now, can be picked up cheaper than a pi off eBay. DDR 4, sata m.2, on board emmc flash. M.2 a-key for WiFi. Max 16GB ram. When you throw in m.2, lots of ram, all that IO eats power. So the minimum idle power creeps up. Arm boards too.