4 ms·
Add # Disable Power LED after boot dtparam=pwr_led_activelow=off # Disable SD card activity led dtparam=act_led_trigger=none dtparam=act_le
by pja 3y ago
Add
# Disable Power LED after boot
dtparam=pwr_led_activelow=off
# Disable SD card activity led
dtparam=act_led_trigger=none
dtparam=act_led_activelow=off
# Disable the ethernet LEDs - these are Pi4 specific values.
# Look in the docs for the values for other Pi boards.
dtparam=eth_led0=4
dtparam=eth_led1=4
to /boot/config.txt
- Fnoord 3y agoThank you! It appears to depend on firmware or kernel but for recent kernels (recent 6.1 or 6.2) activelow is no longer necessary [1]. It seems to work on CM4. PS: my bad I disabled the LEDs via /sys not /proc previously: > # for i in /sys/class/leds/*; do echo 0 > "$i/brightness"; done [1] https://github.com/raspberrypi/firmware/issues/1742 https://github.com/raspberrypi/firmware/issues/1742
- doubled112 3y agoI've had this drive me crazy. The required lines were different between the Pi 2 and Pi 4 I was using at the time, and the documentation was not updated (or I'd found old docs). An exercise in trial and error.