3 ms·
Yeah wouldn’t it be less copper to only put in the voltage connectors? I don’t see why low end wouldn’t skimp out on those
by coffeebeqn 3y ago
Yeah wouldn’t it be less copper to only put in the voltage connectors? I don’t see why low end wouldn’t skimp out on those
- zlsa 3y agoIf a USB-C to USB-C cable only had wires for VCC and GND, here's what wouldn't work: * Data (this one is fairly obvious) * Power (since the CC wire in the cable is missing, and a compliant USB-C power source will refuse to output power unless the CC wire is terminated on the other end which signals what type of device it is) You'd need at _least_ the CC wire as well.
- hedora 3y agoCan’t the cable terminate it instead? That would save a lot of wire, and consumer expectations for USB-C reliability are just above “might catch fire” and below “I’d be surprised if the cable was incompatible or failed so quickly”.
- duskwuff 3y agoYou'd end up with a cable that only worked for "slow charging" (5V / 500 mA), and even then only in one direction (because the cable could only pretend to be Rp+Ra or Ra+Rd for one side). It's easier to do the right thing.
- hedora 3y agoI wonder how much a crappy voltage regulator costs vs. 3-9ft of wire. Maybe you could step the voltage down at the device end?
- dfcowell 3y agoThe spec requires negotiation between the devices to deliver any nontrivial amount of power. A data connection is necessary to enable charging.