4 ms·
> Run your kitchen sink hot water a little before starting to get warmer water into the dishwasher Note: this only makes sense in the US (or wherever else it's
by eru 3y ago
> Run your kitchen sink hot water a little before starting to get warmer water into the dishwasher
Note: this only makes sense in the US (or wherever else it's common for your dishwasher not to heat its own water).
> But don't put two pods in, i.e. one in the detergent tray, and another detergent pod into the tub because these pods are very concentrated and harsh and will damage plates. Only add a little extra powder
I'm not sure damaging your plates is the reason to avoid the extra pod. Plates are often made of some glass-like or ceramic-like material and not that easily damaged by chemicals.
- stdbrouw 3y agoDon't know about the pods, but for a while we used DIY dishwashing powder with soda crystals as the main ingredient, and after a while you could definitely notice slight scratching of glassware, and any printing would fade pretty heavily. Not sure if that's a chemical process or simply the abrasiveness of the powder.
- eru 3y agoOh, dishwashers are definitely hard on printing on glasses. I'm not sure about scratches. I can imagine you would get scratches if your detergent (especially crystals) doesn't completely dissolve? I mean, people even sometimes use sugar as a scrubbing agent. Dissolved sugar can't scratch anything, but sugar crystals can.
- maxerickson 3y agoIt's likely chemical. https://www.maytag.com/blog/kitchen/how-to-prevent-etching-glasses-in-dishwashers.html https://www.maytag.com/blog/kitchen/how-to-prevent-etching-g...
- squokko 3y ago> this only makes sense in the US (or wherever else it's common for your dishwasher not to heat its own water). American dishwashers heat their own water too - I think this is for cases when the dishwasher has a time limit on how long it will spend heating up the water (perhaps to meet expectations on cycle length).
- dwaite 3y agoAmerican dishwashers hook up to the hot water line, vs the cold water line in some other countries. They do have their own heaters, but household models are limited to 1200-1800 watts. The pre-wash/pre-rinse cycle may only give enough time to raise the temperature 10-15 °F before the regular wash cycle starts. I do not believe they will delay the start of the wash cycle due to the water not yet being to target. Starting with cold water reduces the effectiveness of the initial rinse, and may reduce effectiveness or prolong the wash cycle.
- Mandatum 3y agoThe initial rinse cycle never heats water. Running hot will help.
- traveler1 3y agoHot and cold is run totally separate in the UK, I still don't think this would do anything...
- kyteland 3y agoI'm not sure exactly what you're saying here, but I'm assuming you mean they run each source in separate lines. That's the same in the US. The point is that these pipes aren't well insulated so the line has probably cooled even though it is a "hot" line. Running the water a little bit flushes the cooled water out so that only hot water goes into the dishwasher. Because even though it is a "hot" line it gets cold over time if it isn't being cycled. Maybe in the UK you're much closer to the hot water source, but in the US houses are often so big and poorly designed that you need to run the water a bit before you get really hot water from the tap.
- interestica 3y ago> Plates are often made of some glass-like or ceramic-like material and not that easily damaged by chemicals. The edges/sides of my Corelle plates (a layered tempered glass) are rough due to the dishwasher. Also, those with prints have faded significantly.
- sgerenser 3y agoYeah this is a common problem with dishwashers and certain types of glass, it’s called “etching.”
- amiga386 3y ago> > Run your kitchen sink hot water a little before starting to get warmer water into the dishwasher > Note: this only makes sense in the US (or wherever else it's common for your dishwasher not to heat its own water). I don't think this is a US-vs-world issue. Other countries' dishwashers are also connected to the hot water supply. Rather, Technology Connections is suggesting a hack. Your dishwasher, wherever in the world you may be, will start up by using whatever water it can get for an initial rinse of the dishes, and it will measure how dirty the water is after this initial rinse. Normally this water will be tepid. But if you make it hot by running your hot tap first, the hot water will rinse more dirt off the dishes than tepid water, the dishwasher will detect more dirt, and so it will assume the dishes need more aggressive cleaning, and adjust its program accordingly.
- bakje 3y ago> Your dishwasher, wherever in the world you may be, will start up by using whatever water it can get for an initial rinse of the dishes, and it will measure how dirty the water is after this initial rinse. > Normally this water will be tepid. But if you make it hot by running your hot tap first, the hot water will rinse more dirt off the dishes than tepid water ... I might be misunderstanding you, but this definitely doesn't apply everywhere. I don't know how this works in the rest of the world, but in the Netherlands at least my dishwasher is only hooked up to the cold water, running my tap will have no effect on the temperature of the water my dishwasher receives.
- Cthulhu_ 3y agoI bought a new dishwasher (and it's not as good as the old one :/), in the instruction manual it says you can use some configuration to tell it it's hooked up to hot water. It makes sense to hook it up to a hot water line, given things like solar collectors and heat exchangers heating / pre-heating water.
- amiga386 3y agoI can't speak for every person's experience, but what I believe is that most dishwashers being sold today, anywhere, are capable of being connected to domestic hot water, or cold water. They will work with both. That's not the same thing as saying every dishwasher being sold can do this, but check your instruction manual. Perhaps it can. As per a sibling comment, decide holistically if that would be a good idea or not. Unless someone can point me to the existence of regulations saying something like "it's illegal to connect a dishwasher to a hot water line, it's gotta be cold water that the dishwasher heats up itself", then my expectation is that most dishwashers can be connected to either hot or cold, and will heat the water to the correct temperature. Looking at EU regulations, as far as I can see, they don't regulate the intake temperatures that dishwashers have to accept. What they do regulate is energy usage labelling, and mandating there must be an "eco" mode, what the eco mode must do, and if you get to select multiple modes then "eco" mode must be the default. https://commission.europa.eu/energy-climate-change-environment/standards-tools-and-labels/products-labelling-rules-and-requirements/energy-label-and-ecodesign/energy-efficient-products/dishwashers_en https://commission.europa.eu/energy-climate-change-environme...
- jrsdav 3y ago> Plates are often made of some glass-like or ceramic-like material and not that easily damaged by chemicals. A ceramic is a glass (or the other way around), just of a different material composition. And yes, a dishwasher can easily damage both glassware and ceramic dishes depending on how the glass (or glaze, in the case of a ceramic dish) was formulated. A common durability test for ceramic engineers is indeed — placing it in the dishwasher.
- AuthorizedCust 3y agoMy US-sold, 2015-purchased Bosch dishwasher handles its own heating. The first water cycle does not get heated, but all subsequent ones do. I’m tempted at switching it to the cold water line.