13 ms·
It's just an inductively excited synchronous motor; this is a decades-old design being brought out again to satisfy the current trending buzzwords in the indust
by userbinator 3y ago
It's just an inductively excited synchronous motor; this is a decades-old design being brought out again to satisfy the current trending buzzwords in the industry.
https://patents.google.com/patent/US2969491A https://patents.google.com/patent/US2969491A
https://patents.google.com/patent/US3034035A https://patents.google.com/patent/US3034035A
https://patents.google.com/patent/US3667014 https://patents.google.com/patent/US3667014
(The most powerful motors have always been wound-field designs, since huge permanent magnets are extremely difficult to make and even more difficult to handle at all.)
- adrian_b 3y agoAll the inductively excited synchronous motors described in those patents work due to including semiconductor rectifiers in the rotor. It is likely that today this concept from more than a half of century ago can be revived at a much higher level of performance, due to the present ability of making optimized designs and due to the fact that now much better rectifiers are available, e.g. silicon carbide Schottky diodes.
- achr2 3y agoThere might not be any diodes required if the driver uses a very high frequency DC chopper, the smoothing could be purely reactance + momentum.
- ARob109 3y agoI suspect this ZF motor is like what is described in this paper [1]. An air gapped transformer is used to transmit power to the rotor and diodes rectify it. See Figure 1. This [2] appears to give a good summary of PSM vs ASM vs EESM and introduces iEESM (i is for inductive excitation instead of brushes, sounds like the ZF motor) at slide 14. [1] Design of Inductive Power Transmission into the Rotor of an Externally Excited Synchronous Machine https://mediatum.ub.tum.de/doc/1226682/1226682.pdf https://mediatum.ub.tum.de/doc/1226682/1226682.pdf [2] https://cdn.vector.com/cms/content/events/2018/vEMOB18/01_Inductive_Electric_Excited_Synchronous_Machine_Parspour.pdf https://cdn.vector.com/cms/content/events/2018/vEMOB18/01_In...
- adrian_b 3y agoIt does not matter whether the driver generates AC or chopped DC, when passing through the gap between stator and rotor, any DC component is removed. To provide the DC component needed by the excitation current, a rectifier is required, or at least a nonlinear impedance, but the latter would have a lower efficiency, due to higher AC components that would cause losses without providing useful torque. A brushless synchronous motor which relies on an electric excitation current in the rotor (i.e. not on permanent magnets, hysteresis or variable reluctance) cannot generate the required excitation current when only linear circuit elements are present in the rotor.