2 ms·
The bigger 8" floppies were remarkably robust. The boot floppy for an 11/780 fitted into an LSI-11 mounted on the front door, with a vertical disk drive slot so
by ggm 3y ago
The bigger 8" floppies were remarkably robust. The boot floppy for an 11/780 fitted into an LSI-11 mounted on the front door, with a vertical disk drive slot so you opened up the cab, ignored all the CPU cards, put it into a slot, closed it up and booted.
The operator I knew frequently had this folded up in his pocket: You just had to smooth it out a bit, make sure it rotated inside its kevlar sleeve, and off you went.
(DECTAPE was famously robust, everything was written out about 5 times in the tape, it was designed for light industrial deployments. It was wide like old school 16 track audio tape, not like classic 1/2" 800/1200/9600 bpi computer tapes, before DAT/DLT cartridges and the like. But that said, the old tapes were pretty robust too)
- sedatk 3y agoSimilar story with C64 5.25” floppies. At the computer shop I worked at in 1989 we had a Microprose Soccer floopy disc without its shell, just the magnetic core. We used that to load the game and it always worked flawlessly. Sometimes we missed the floopy drive’s door, and the disc would crumple, but still work.
- Someone 3y agoPart of that is because each bit stored was so large that you could feel whether it was zero or one by moving a magnet above the disc. That’s exaggerated, but the first 8” floppy held only about 80 kilobytes (https://www.ibm.com/ibm/history/ibm100/us/en/icons/floppy/breakthroughs https://www.ibm.com/ibm/history/ibm100/us/en/icons/floppy/br...), with tracks that were over half a mm wide (32 tracks/inch), and about 62 bits/mm. It also was read-only. Reading https://archive.org/details/ibmrd2505ZE/page/n5/mode/1up https://archive.org/details/ibmrd2505ZE/page/n5/mode/1up, that soon become about 250kB. That’s also what DEC’s first ones stored, according to https://en.wikipedia.org/wiki/List_of_floppy_disk_formats https://en.wikipedia.org/wiki/List_of_floppy_disk_formats.
- yomlica8 3y agoI remember reading that there was a lot of data storage "left on the table" with floppy drive tech before it was finally abandoned. They apparently stored bits uniformly across the disk instead of more densely at the edges where distance between the points was greater. Considering how there was a real missing niche for a denser floppy media for a number of years (that allowed things like zip drives to become somewhat common) I found this idea pretty surprising.
- IIsi50MHz 3y agoAlthough single-speed motors were most common, some drives had variable speed motors. In combination with an appropriate disc controller, the rotation could be sped up or slowed down so that bit locations arrived at the read/write head at a uniform rate. Thus you could pack bits as closely on the outer tracks as on the innermost.