4 ms·

I have worked with a very similar setup to prototype devices for a customer. One of the peripherals controlled was also a pump and interestingly, our interface

I have worked with a very similar setup to prototype devices for a customer. One of the peripherals controlled was also a pump and interestingly, our interface looked almost exactly like what is being proposed here. In terms of hardware, I can highly recommend Tinkerforge [1]. They support a wide range of sensors and actuators and can be controlled either via USB from a computer (all major platforms and many programming languages supported) or, for standalone devices, with an ESP32-based base-board called ESP32 Brick or ESP32 Ethernet Brick. Since their products are open source (code AND schematics!) a design can be easily transferred to a custom PCB once the design is working. Add either a web interface (native on the ESP32 or on your host computer if using a USB brick) or slap on a DearImgui frontend, and you have very powerful prototyping platform at your hands. [1] https://www.tinkerforge.com/en/ https://www.tinkerforge.com/en/

lynaghk 3y ago
Author here. Thanks for writing about Tinkerforge! I hadn't seen it, and it looks like it hits most of the requirements I sketched out: - inexpensive modules: $35 USB-C master per 4 modules; $17 for 16 GPIO, $35 for RS-485, $25 for CAN, etc. https://www.tinkerforge.com/en/shop/bricklets.html https://www.tinkerforge.com/en/shop/bricklets.html - plug and play fieldbus (TCP/IP request/response; seems like bricks have IDs from the factory https://www.tinkerforge.com/en/doc/Programming_Interface.html https://www.tinkerforge.com/en/doc/Programming_Interface.htm...) - excellent docs for multiple programming languages - easy setup and logging GUIs https://www.tinkerforge.com/en/doc/Software/Brick_Logger.html#brick-logger https://www.tinkerforge.com/en/doc/Software/Brick_Logger.htm... I'm super impressed they built a 7 person business around this concept and have been going since 2011 (all while doing their manufacturing in Germany!)

lynaghk 3y ago

Author here. Thanks for writing about Tinkerforge! I hadn't seen it, and it looks like it hits most of the requirements I sketched out: - inexpensive modules: $35 USB-C master per 4 modules; $17 for 16 GPIO, $35 for RS-485, $25 for CAN, etc. https://www.tinkerforge.com/en/shop/bricklets.html https://www.tinkerforge.com/en/shop/bricklets.html - plug and play fieldbus (TCP/IP request/response; seems like bricks have IDs from the factory https://www.tinkerforge.com/en/doc/Programming_Interface.html https://www.tinkerforge.com/en/doc/Programming_Interface.htm...) - excellent docs for multiple programming languages - easy setup and logging GUIs https://www.tinkerforge.com/en/doc/Software/Brick_Logger.html#brick-logger https://www.tinkerforge.com/en/doc/Software/Brick_Logger.htm... I'm super impressed they built a 7 person business around this concept and have been going since 2011 (all while doing their manufacturing in Germany!)