4 ms·
Because a diode that becomes on has a very low resistance, there will indeed be great spikes of current, which is a desirable thing, because this causes faster
by adrian_b 3y ago
Because a diode that becomes on has a very low resistance, there will indeed be great spikes of current, which is a desirable thing, because this causes faster switching times between the logic levels.
This is a reason why DTL circuits can be much faster than the RTL circuits, because in the latter the resistances slow down the charging and discharging of the various parasitic capacitances of the circuit.
The current spikes are not a problem (because they are very short in time), they just require the presence of good decoupling capacitors close to the gates, to keep the current spikes localized, and various other shielding or decoupling measures may be needed, to avoid creating radio interference above what is accepted by standards. This is unavoidable for fast logic circuits, regardless of their schematic.
There are only two ways to make a logic circuit faster, either making it smaller so that its capacitances become smaller too, or increasing the current spikes that can be delivered by the transistors. The problem in logic circuits is that the transistors always limit the current spikes to lower values than desired, which limits the attainable clock frequency, and never that the current spikes are too high.