2 ms·
I don't think a house can survive 100C. For the battery to reach this temperature, the sustained air temperature has to be over 100C for several hours. At this
by cyberax 3y ago
I don't think a house can survive 100C.
For the battery to reach this temperature, the sustained air temperature has to be over 100C for several hours. At this temperature, most of the plastics will start losing structural integrity. Windows will crack from thermal expansion. And water boiling in the pipes will probably be the least of your worries.
> Instantaneous flame temperature may peak above 1090 K.
A gas stove flame is at that temperature, but it's also very thin. Think about how long it takes to boil a pot of water.
Now move that pot away from the direct flames, just a few centimeters. It's likely that the water won't ever get to the boiling temperature.
> Who's going to put a Powerwall inside their house in any case? It'd go outside, well away from the house, out by the outbuildings and fuel tanks.
FWIW, my whole-house backup battery (Enphase, not Powerwall) is in the garage. Because it gets very cold where I live, and the battery needs to be warm enough to work.
- defrost 3y ago> I don't think a house can survive 100C. Well, you can think that, no one will stop you. Worth pointing out, though, that I literally linked you to design standards for Australian houses intended to survive: A house in a bushfire may be faced with three ‘waves’ of assault. The first is the radiant heat that arrives just ahead of the fire front itself, which can start to build as much as thirty minutes before the arrival of the flames. Once the flames themselves hit, a house in a flame zone environment could be subjected to temperatures as high as 1000°C for a couple of minutes. But even after this initial front passes, the danger is not over; there is still a threat from residual radiant heat that takes a while to ease and embers that continue to bombard the house for many hours. and suggested you look for the extreme test videos that subject various steel frame mockups to a battery of flamethrowers to simulate Australian bushfires. Again, 100C is the tempreture of boiling water; what's the ignition point of hardwoods? what's the sagging point of steel?