4 ms·
All I want for these IoT things is being non-cloud dependent and PoE. I will run a billion wires before dealing with stupid batteries that keep dying, and they’
by bombcar 3y ago
All I want for these IoT things is being non-cloud dependent and PoE. I will run a billion wires before dealing with stupid batteries that keep dying, and they’re getting so expensive, too.
- wkat4242 3y agoThose batteries are really annoying yes. Also these battery devices tend to be unstable. Every week I have to either re-pair something or swap out a battery. When I get my own place I'll get KNX.
- mtreis86 3y agoYep. Running the wires once is a big pain but it is linear at worst, more devices requires more wires, maybe even log growth since you can branch at junction boxes that already exist. Changing the batteries once a year is only a little pain, but it adds up fast when you have dozens of them, and it takes place routinely so it no better than linear growth.
- bombcar 3y agoThe door lock not being able to unlock because the batteries had died trying to keep marginal Wi-Fi operating was the kicker for me. Very annoying.
- Whatarethese 3y agoPretty much all door locks have apps which will tell you weeks in advance to change the batteries. I have a Schlage that has been rocking 4AA batteries for over 2 years.
- galangalalgol 3y agoHome infrastructure for power and data is due for a switch. Copper is expensive, and running 120V at 15A everywhere is really overkill with a 3w led bulb being blindingly bright and needing dc. Electronics largely are all hooked to USB-c chargers at this point. The poe to USB-c splitters are largely 5v at this point, but poe can produce over 70W depending on type, so it doesn't have to stay that way. Ideally, daya could be bridged as well, plug in usb-c start charging and it looks like a network adapter too. The number of things that need more than 70w isn't that high. Kitchen mostly. Bigger TVs. Real beefy laptops or desktop computers. If they made a new POE standard that could support USB PD3.1 you could run anything outside the kitchen other than the a/c. That would probably mean a new cable standard though. Even just as things stand, POE could largely replace electrical wiring outside the kitchen.
- conradev 3y agoLeviton already makes the power version of this in my opinion: https://www.leviton.com/en/products/residential/usb-charger-outlet-receptacles#t=Products&sort=%40wcs_site_tree_rank%20ascending&layout=card&numberOfResults=48&f:@tsa_type=[Type%20C%2FC%20with%20PD%20Duplex%20Receptacle] https://www.leviton.com/en/products/residential/usb-charger-... Move the USB-C PD inverters to be integrated into the outlets, instead of plugged in on top. I already did this upgrade for all counter-height outlets in my kitchen, and it's great! The holy grail, of course, would be ethernet/data as well, but that is far more cost prohibitive
- bradstewart 3y agoThose are nice for reducing clutter (I have some), but you're still running 120v on 12ga copper into every one of them.
- vineyardmike 3y agoI’m working on building a home and have been investigating this seriously. I want to put multiple POE outlets in every room, and running them to places that are common for automation (eg for cameras, motion sensors, control displays, etc). I wish I could get wired sensors for doors/windows but the pricing is honestly way higher than just Zigbee with a battery once for factor in wires in the walls and a centralized patch panel. I never thought about converting POE to USBC-PD but that would be a great thing to add to the “office” and locations where someone may very occasionally want power for a laptop (eg near couch, beds) I’m exclusively using “normal” 120v outlets that also have a 5v usb port on it, and placing extra where I can, which is less crazy but still practical.
- eternityforest 3y agoIf you need to run 15A across the room anyway, might as well use it for everything. 120v can carry more power with less copper. We have separate lighting circuit that we could switch, but that's about it. And at that point it would be easier just to allow for thimmer 22AWG 120v 0.8A lines or something. But electric codes assume people might want incandescents, that's not possible with just PoE. I'd love it if we had wall outlets for USB that look like network adapters to the PC though. Why do we still use RJ45 when consumer stuff doesn't get past 1gbps?
- stavros 3y agoI find Zigbee a great protocol for that. It runs locally (doesn't even go on wifi), and the sensors last for years on a coin cell.
- bombcar 3y agoYeah, Zigbee works well. The real killer is when you want to "do something physical" in the real world on batteries, like unlock a door, etc. That nobody has come up with a powered doorjamb instead of powered deadbolts is annoying; I'll have to build one myself using something like https://www.americanlocksets.com/hes-1006cdb-electric-smart-strike-complete-for-deadbolt-locks-p-6985.html https://www.americanlocksets.com/hes-1006cdb-electric-smart-...
- stavros 3y agoAh, yeah, mechanical things require a lot of energy, unfortunately. That said, I'd love an ESP32 for Zigbee. I bought an H2, but the documentation hasn't been good enough that I could make it work.
- jmbwell 3y agoPoE ESP32 for DIY IoT, fyi: Non-isolated: https://www.olimex.com/Products/IoT/ESP32/ESP32-POE/open-source-hardware https://www.olimex.com/Products/IoT/ESP32/ESP32-POE/open-sou... Isolated: https://www.olimex.com/Products/IoT/ESP32/ESP32-POE-ISO/open-source-hardware https://www.olimex.com/Products/IoT/ESP32/ESP32-POE-ISO/open...
- bacon_waffle 3y agoThese little boards are great - I'd recommend the isolated version for anything that might be referenced back to ground potential. We have one in an OpenEVSE, it's been ticking along no problems for a couple years now. In that scenario, in theory the PoE allows the ESP32 to detect if the EVSE breaker pops - I've not had that happen, but it seemed like a worthwhile feature to consider ;).
- eco 3y agoThat looks great. The 0-70C operating range is noteworthy if you want to use it for a doorbell, though.
- waste_monk 3y agoIf you're worried about sub-zero temperatures, couldn't you just have it busy-loop or even drive a small heater to generate heat? Just enough to keep the doorbell enclosure warm. If it's running off PoE it's not like you have to worry about battery budget or efficiency so much. Not sure if there are insulating materials available that provide good thermal insulation but not acoustic insulation?
- paco3346 3y agoAwesome, I've been using the wESP (https://wesp32.com/ https://wesp32.com/) for most things but I like the size (and price point) of these. Granted, they fit different use cases as the wESP has more I/O exposed but is quite a bit larger.
- mostthingsweb 3y agoCan't help you with PoE, but Home Assistant is non-cloud by default.
- dheera 3y agoI want solar powered. The doorbell probably gets pressed what, once in 5 days? Cover the enclosure of that thing in solar panels and have some super-capacitors for overnight power.