3 ms·
It should be noted that pockets of jumbogram-in-the-wild exist. It's just normalised to clamp it to the point few people can exploit it. For example, the NBN i
by ggm 3y ago
It should be noted that pockets of jumbogram-in-the-wild exist. It's just normalised to clamp it to the point few people can exploit it.
For example, the NBN in Australia uses a 2000+ layer-2 frame and nothing like 500 bytes is consumed to mark the upper carrier. They COULD have gone higher than 1500 and I would be surprised if there arent customers using 1300 or less because of the ADSL configuration they brought over when they uplifted from a real modem.
A lot of people do 9000 in their filestore network. They know it works on the local segment. Reducing the forwarding burden in header-TCAM-routing by a factor of 5 is a significant win, if you have a lot of packets.
People continue to discuss mechanistic approaches to finding your MTU in the IETF but I think you're right: its 1500 or less pretty much forever unless somebody makes a move here for product differentiation reasons. Given the embedding of content inside the ISP or at the IX, I suspect it COULD happen, if e.g. Netflix said it was a better overall experience? The ISPs would do it.
- cyberax 3y agoGetting MTU=9000 to work is tricky even in a home network. I know, I spent several days setting it up. And even then, I got slapped by WiFi. Its PHY MTU is limited to 2304 bytes, and that's a hard limit. Even for the plain old wired Ethernet, I had to experiment a bit because the first multigig USB-C adapter didn't support Jumbo Frames.
- rjsw 3y agoPlenty of networks that use PPPoE over base network technology to connect to a "virtual" ISP implement at least mini jumbo frames. If you can set the MTU of the hardware to 1508 then the PPPoE connection runs at 1500.