3 ms·
You messed up at your last step 1 millionth = 1mm, 10 millionth = 0.1mm, 100 millionth = 0.01mm 0.01mm is very difficult when you’re talking large custom objec
by Retric 3y ago
You messed up at your last step 1 millionth = 1mm, 10 millionth = 0.1mm, 100 millionth = 0.01mm
0.01mm is very difficult when you’re talking large custom objects with complex shapes.
- dale_glass 3y agoOh, English fail on my part then. I had assumed that 100 millionths of a metre == 100 * 1/1000000.
- eis 3y agoThe german site of the source speaks of 0.1mm so you were correct > bei Toleranzen von teilweise nur 0,1 Millimeter https://www.ipp.mpg.de/de/aktuelles/presse/pi/2020/01_20 https://www.ipp.mpg.de/de/aktuelles/presse/pi/2020/01_20
- Retric 3y agoNo your correct, I just read it wrong. Really needed to pay attention to the s.
- starkrights 3y agoI think the original commenter is right- correct me if I missed what you’re getting at. Keeping it all in the same units until the end here: 1 millionth of 1 meter = (1 / 1,000,000)m = (1e-6m) 1 millionth * 100 = 100 millionths => (1e-6m) * 100 = (1e-4m) = 100 millionths (1e-4m) = .0001m | 1m = 1000mm => .0001m*1000 = .1mm
- deleted 3y ago[deleted]
- Retric 3y agoOps, 100 ( 1 millionths of a meter) is a much more reasonable tolerance here than 1 / (100 millionth) of a meter. I am to used to people saying 100 millionth of a meter to mean 10 nm or 0.01 µm which would have looked insane if I had written that. Aka 100 millionth vs 100 millionths