2 ms·
Now I actually wonder were there ever any machines that had LPT9, COM9 I could barely see.
by Ekaros 3y ago
Now I actually wonder were there ever any machines that had LPT9, COM9 I could barely see.
- deleted 3y ago[deleted]
- blueflow 3y agoYou can reassign real device to any of these names
- Ekaros 3y agoReassign and actually use all of them are different things.
- zaxomi 3y agoMSDOS 3.3 had COM1, COM2, COM3, COM4, LPT1, LPT2, and LPT3. LPT4-9 and COM5-9 was not part of MSDOS.
- olyjohn 3y agoIIRC those were mapped to specific I/O and IRQ Ports back in the day. COM1: I/O port 0x3F8, IRQ 4 COM2: I/O port 0x2F8, IRQ 3 COM3: I/O port 0x3E8, IRQ 4 COM4: I/O port 0x2E8, IRQ 3 I also remember, there was a while where there was no IRQ sharing. So some machines couldn't use all the COM ports available. Or you'd add in like a modem, and would have to disable the onboard COM port if it was using the same IRQ.
- fredoralive 3y agoIf you do embedded stuff you can easily get above COM100 if you're doing something like testing (if a USB to serial converter has a serial number, it gets a unique COM port). Although I don't think these high numbers have any effect on the file system, just the legacy low numbered ones DOS could have.
- tssva 3y agoBack in the day many of my clients had Windows NT/2000 machines running RAS or RRAS with multi-port serial cards connected to modems for employee remote access. Usually these would be 8 or 16 serial ports per card with multiple cards installed per server.