3 ms·
I don't believe that theory. Instead, I think incandescent bulb lifespan is limited by sublimation of tungsten.
by pfdietz 3y ago
I don't believe that theory. Instead, I think incandescent bulb lifespan is limited by sublimation of tungsten.
- Timon3 3y agoDo you have a basis for not believing it aside from you having a different theory?
- pfdietz 3y agoYou will note that incandescent bulbs gradually get dimmer as they age, due to deposition of tungsten on the glass. Also: http://donklipstein.com/bulb1.html http://donklipstein.com/bulb1.html "Due to the high temperature that a tungsten filament is operated at, some of the tungsten evaporates during use. Furthermore, since no light bulb is perfect, the filament does not evaporate evenly. Some spots will suffer greater evaporation and become thinner than the rest of the filament. These thin spots cause problems. Their electrical resistance is greater than that of average parts of the filament. Since the current is equal in all parts of the filament, more heat is generated where the filament is thinner. The thin parts also have less surface area to radiate heat away with. This "double whammy" causes the thin spots to have a higher temperature. Now that the thin spots are hotter, they evaporate more quickly. It becomes apparent that as soon as a part of the filament becomes significantly thinner than the rest of it, this situation compounds itself at increasing speed until a thin part of the filament either melts or becomes weak and breaks." Halogen bulbs last longer because the sublimated tungsten is converted to volatile halides, which then preferentially decompose back to elemental tungsten at the hot spots, healing them.
- rcxdude 3y agoBoth are relevant, and can feed into each other. A incandescent lightbulb that has been on for a long time is more likely to fail after a power cycle, as the cycling adds additional stress (anyone who's used them can attest to this: the most common experience with one failing is going to turn it on, only to get a brief flash of light before it fails).
- pfdietz 3y agoSure. But that has very little to do with lifespan.
- rcxdude 3y agoIt seems to be relevant to lifetime, though not the dominant factor in most cases. There is an annoying shortage of actual data on this online though (the best actual experiment I can find is mythbusters where a 2-minute on-off cycle caused a failure in two weeks, which is obviously extreme but shows how rapid cycling can affect lifespan).
- rocqua 3y agoSublimation will thin out the wire, which weakens it. But the final failure mode is the fillament breaking. This can happen due to the wire getting so thin it melts. But the thermal stress of power cycling can also cause the thinned out wire to break. Perhaps the micro-cracks also increase wire resistance, causing more sublimation. The two mechanisms can easily interact.
- pfdietz 3y agoYes, that's right. And it gives the illusion that on/off cycling is aging the bulb. That's like looking at someone who dropped dead from a heart attack during exercise and concluding exercise causes aging.