5 ms·
The Sydney Harbor Tunnel had this problem. After an over-height truck got wedged in the tunnel and took three weeks to remove, the tunnel operators had to do so
by Animats 3y ago
The Sydney Harbor Tunnel had this problem. After an over-height truck got wedged in the tunnel and took three weeks to remove, the tunnel operators had to do something drastic. They already had multiple sets of detectors, flashing lights, signs, and movable bars hanging down to bang on overheight trucks. That wasn't enough.
So they had something custom built, which is now a product called Softstop.[1] When the detectors sense an over-height truck, water jets shoot downward across the road. Then, a very high powered projector projects a giant STOP sign on the water curtain, right in front of the truck. That seems to successfully get truckers attention.
Softstop is a complex installation, with pumps, tanks, drains, lights, and controls. It's probably overkill for some minor underpass.
[1] https://vimeo.com/253900884 https://vimeo.com/253900884
- fnordpiglet 3y agoThat’s incredibly cool. I wonder if it could be simplified with misters instead of pouring water, which would at least require less water storage, emitters, and drainage.
- rob74 3y agoMisters probably aren't fast enough, plus the mist would get blown about by air currents, so it wouldn't make a good projection surface...
- afandian 3y agoIn case anyone else was curious to see Roland music equipment in that video, it's an AR-3000 Digital Announcement Recorder. https://www.roland.com/uk/products/ar-3000/ https://www.roland.com/uk/products/ar-3000/
- ragazzina 3y agoHow is such a system cheaper than a big breakable but solid STOP sign on an arm, like those american school buses.
- jkingsman 3y agoThe video explicitly mentions -- "you can't put things in front of vehicles doing 60 or 80kph" (~40-50mph), I assume with the implicated "without causing damage to them or making road conditions unsafe".
- Dalewyn 3y agoAnother reason mentioned is that police and emergency response vehicles need to get through.
- adrian_b 3y agoOther countries do not use this excuse, which actually is irrational. If a resistant barrier is put before the tunnel at the height limit, it will damage any too high vehicle that attempts to pass, but removing the barrier guarantees that the vehicle will be damaged later, in worse conditions, inside the tunnel. If the vehicle stops later inside the tunnel, instead of being blocked before it in some place with good visibility, then the road conditions will certainly be even unsafer.
- regularfry 3y agoIt's a question of liability at that point, not damage to the vehicle. If I put a barrier across the road, and you hit it, you can make the argument that while you hit the barrier you wouldn't have hit the tunnel roof. That's going to play out differently in different jurisdictions, I'm sure.
- gambiting 3y agoI imagine like many things in the US - it's about liability. Putting in a barrier specifically designed to damage your vehicle could be seen as accepting liability for it(even though it prevents larger damage if you continue). A bridge damaging your vehicle isn't there on purpose - it's your own fault for ignoring it. Other countries aren't as litigious as the US so I suspect it's just easier to do things like that.
- 3y ago
- adrian_b 3y agoOther countries use a much cheaper method. At some distance before the tunnel or passage under a bridge with limited height (but after the signs that advertise this) there is a solid metal barrier at the height limit and when any too high truck attempts to go forward (which of course happens from time to time) the barrier cuts the top of the truck, which is guaranteed to attract the attention of the drivers (and presumably the anger of their employer). EDIT: I have posted this before watching the video, which shows exactly how this method, of using a steel "crash beam" works. In this case, the truck was only slightly above the height limit, but in another place I have seen a similar incident where the truck was higher so all its roof has been cleanly cut and detached from the truck. This is the right method of handling such height limits, the only one that is guaranteed to be foolproof. Even if it damages the vehicle, if the vehicle were able to pass with an extra height, it is certain that it would be damaged anyway, but in worse conditions, especially in the case of a tunnel.
- mark_undoio 3y agoNear where I live we've got a guided busway (a track system that modified buses can travel down, tram-style). On the railway bridge before it's entrance there's a height barrier in advance consisting of a whole load of bells that dangle down from a metal bar and will hit over-height vehicles without making a really solid collision. They still haven't figured out a way to stop cars driving up the bus tracks, though (where they inevitably get stuck).
- gnfargbl 3y ago> This is the right method of handling such height limits, the only one that is guaranteed to be foolproof. Near where I grew up, there was a low bridge. At one point many years ago, an excavator on a low-loader hit the bridge, causing the excavator arm to swing around... into the upper deck of a loaded bus travelling in the opposite direction. The point is, this method might be foolproof in terms of preventing damage to the bridge, but it has other potential drawbacks.
- topspin 3y ago> I have posted this before watching the video They've done every conceivable thing to mitigate the problem at this bridge. Watch the old videos, before they had the crash bars and huge signs and flashing lights. Before they raised the bridge to the limit of what the rail line could tolerate.