3 ms·
You have cause and effect switched. The field is the result of the flow of electrons, not the other way around. That makes for a nice shortcut ('it's all fields
by jacquesm 3y ago
You have cause and effect switched. The field is the result of the flow of electrons, not the other way around. That makes for a nice shortcut ('it's all fields') but without that flow of electrons through a conductor carrying current there is no field. Fields are a direct result of moving charge and electrons carry charge. This is symmetrical, fields in turn have the potential to move charge. The fact that some fraction of those fields extends outside of the conductors (they have to, they are at right angles to flow of the electrons in the conductor) is not a very good reason to suddenly leap to the conclusion that all 'energy is transferred outside of the copper' until you actually use that component: such as in a transformer, or to model parasitic inductances between conductors. And then you'll find that for most wire thicknesses and most frequencies (except for special HF 'litze' wire) the bulk of the energy is still transferred within the circumference of the wire. That's because the EM field of a single electron is tiny and extends in theory out into infinity but in practice and at normal currents and frequencies is actually very limited.
The reason why people under normal circumstances would not decorate the diagram with arrows between power sources and sinks is simple: it would be redundant. Just like we don't draw capacitors, coils and resistors over every wire. We all know they are there but for most practical work you can ignore them, in fact you do your level best to ensure that those parasitic components are as small as you can make them to ensure your circuit works as intended. But once they become more dominant (which already happens at very low frequencies above DC) you have to start taking them into account, but for most regular applications you will still find that the larger part of the field is constrained within the wire and only a tiny amount extends outside of it.
So, in an extremely pedantic sense you are right: for an infinitely thin wire the EM field will lie completely outside of the wire. But for real world wires the bulk of the field is constrained within the wire.
- H8crilA 3y ago> You have cause and effect switched. The field is the result of the flow of electrons. Actually it's the electric field that causes the flow of electrons. The flow of electrons does not create the electric field. It can't be the other way around, as the movement of electrons does not create an electric field, only a magnetic field (which is then crossed with the electric field outside of the conductor to create a flow of energy). Electrons do not carry energy in a circuit. They use up some of the energy from around the conductor when they bump into atoms of the conductor, we call this process resistance. In particular they can be used purposefully to convert EM energy into heat, like in a light bulb. PS. I keep bringing the circuit theory in because it is the reason why people can't believe how electricity actually works. But you can forget about this if it doesn't help, it's not that important.
- jacquesm 3y agoI really hate to start quoting basic wikipedia articles but I have some other stuff to do and I don't want to leave this dangling, from: https://en.wikipedia.org/wiki/Electric_field https://en.wikipedia.org/wiki/Electric_field This is the second sentence in that article: "Electric fields originate from electric charges and time-varying electric currents." > I keep bringing the circuit theory in because it is the reason why people can't believe how electricity actually works. Circuit theory is simply a very useful approximation and how 'electricity actually works' is highly counter intuitive because for starters we got the flow of electrons wrong (they flow from - to + and not the other way around). Still, conceptually, everybody that does electronics for a living will model the flow from + to - because of convenience. But strictly speaking that's not how it 'really works'. But nobody cares they just have a job to do and the tools that suffice for that are the tools that will be used. Finally: the QM reconciliation of EM and Gravity is for now an unsolved problem so there is a fair chance that in the long run you'll be able to make the argument that 'EM is not really how it works'. But for now it's good enough.
- deleted 3y ago[deleted]
- colanderman 3y ago> You have cause and effect switched. The field is the result of the flow of electrons, not the other way around. I literally said "this field is induced by the flow of electrons." (Specifically, the magnetic field. The electric field is due to charge difference between the wires.) > for real world wires the bulk of the field is constrained within the wire. No, there is none - zero - nada - electric field perpendicular to the wire within said wire. If there were, the electrons would all flow to one side of the wire -- but, as you agree, they don't for DC, they are distributed throughout the bulk. (There is a small electric field within the wire parallel to the wire; this is associated with the resistivity and energy loss in the wire, which is not related to power transfer. Its Poynting vector points outward from the wire, not to or from the source.)
- jacquesm 3y agoSo, you are proposing the the electric field of electrons moving inside a wire somehow have their fields appear outside of the wire rather than proportional to the distance from the electron (Coloumbs inverse square law)? As though the medium in which a particular electron is suspended can create an exclusion zone for its electric field? That's interesting but contrary to just about everything that I've ever learned about this stuff. My understanding to date is that there is an electric field in a wire because if there wouldn't be then there would be a non-uniform distribution of electrons in the wire, in other words, without an electric field in the wire there would be no current to begin with, the fact that there is a current is proof that there is an electric field in the wire. I would expect that field to be aligned with the direction of the wire and constant in magnitude relative to the flow of the current. Anything else just simply does not make any sense to me.
- colanderman 3y agoConsider the x component (along the wire's length) and the y and z components (along the wire's radius) separately. There is a E field component along the x axis within the wire, correct. This provides the force which causes the electrons to accelerate. The field is slight -- remember it's just the voltage from one end of the wire to the other (millivolts) divided by its length. Notably, this component does not impart energy to the load -- it corresponds directly to energy dissipated in the wire itself (i.e. its Poynting vector points toward the center of the wire). But along the wire's radius, within the wire, there's no net E field. Each electron (and each proton!) contributes a small field (which does extend immediately from the electron-point-source as you say), but the electrons arrange themselves within the metal such that the net field along these axes in the wire is zero. (If they were not arranged so, the nonzero field would push them toward this arrangement. Since the electrons aren't moving along these axes, the field along these axes is zero.) In the intuitive sense -- uniform static distribution of electrons begets a uniform static field among them. Outside the wire -- assuming the wire has a net charge (positive or negative) -- we do see a radial electric field, because the electrons are not free to move to/from the wire through free space to neutralize this field. And if there are two wires of opposite charge (as in the circuit described), the fields sum constructively (as one wire's field is radially outward, the other's radially inward). This field is much larger, particularly if the wires are physically near each other, since it derives from the voltage difference between the wires, rather than across them. (And most importantly, the Poynting vector of this field points toward the load.) You may be right that the region outside the wire where energy flows may be small and near the wire (working through some math now) but it's definitely outside the wire for the reasons given above, and flows between sources and sinks according to the Poynting field, not along any path that's visually represented in a circuit diagram.