37 ms·
Once you ship the dies overseas there is no going back. Apropos Milwaukee: I had one of their circular saws which dropped from a roof that I was working on and
by jacquesm 3y ago
Once you ship the dies overseas there is no going back.
Apropos Milwaukee: I had one of their circular saws which dropped from a roof that I was working on and I thought for sure it's a goner. Climbed down, not a mark on it, still dead straight. It must have landed very fortunately but still that was quite the drop. and you'd at least expect some impact damage. There was a scratch on it, but that may well have been there from before the drop and it didn't look like anything to do with impact.
- bombcar 3y agoTheir tools are pretty damn durable; I have broken some but that's to be expected (and the repair/warranty has been quite reasonable). Uncle bumblef*ck always does the drop test, because it's quite realistic, especially for tools used on a ladder. His teardowns are always fun: https://www.youtube.com/watch?v=IbfNzt0UMGc https://www.youtube.com/watch?v=IbfNzt0UMGc
- lovich 3y agoAh, is he back on the teardowns again? I was an avid watcher of him for a few years until he went off the deep-end with covid and backing the canadian caravan. If he's gone back to what he was good at(teardowns of tools with explanations of the materials and manufacturing choices) I might start watching him again
- mikrotikker 3y agoI enjoyed the real talk and his support of the truckers in face of the abusive Canadian government. It was a pretty popular position there in any case. Boatloads of supporters out in subzero weather proved that. I definitely empathised with all of that. There's reports and studies coming out every week proving him right so.... I guess if you're a more sensitive, tow the line type you may have been put off. https://www.independent.co.uk/news/uk/politics/covid-lockdown-study-b2351604.html https://www.independent.co.uk/news/uk/politics/covid-lockdow... https://www.telegraph.co.uk/news/2023/06/22/chris-whitty-scientists-would-not-call-lockdowns-ministers/ https://www.telegraph.co.uk/news/2023/06/22/chris-whitty-sci... https://www.nytimes.com/2023/07/17/briefing/covid.html https://www.nytimes.com/2023/07/17/briefing/covid.html
- lovich 3y agoDefine boatloads. Canadians going out in subzero temperature also isn’t impressive. They’re used to the cold. Your articles aren’t convincing me anymore that these were crazies. The second article for instance isn’t scientists saying lock downs weren’t needed but that it wasn’t scientists, and that committee of medical scientists in particular, role to be making wide sweeping changes to society. A completely reasonable position that doesn’t change whether or not lockdowns were needed
- mikrotikker 3y agoWhat is crazy about not wanting to suffer under an authoritarian regime that would seize your bank account and your livelihood for calling for a change in policy? Thats called the democratic process.
- simfree 3y agoHe went down the COVID conspiracy and Freedom Convoy rabbit hole? Damn, that sucks. A surprising number of Canucks went down this rabbit hole, effectively losing years of their lives to these two movements and destroying their social networks and familial bonds. One Canadian I knew cried for hours every day thinking her vaccinated extended family members were going to die. But hey, every date she listed as when I would die due to vaccine has passed and I'm still alive and healthy! So is her family, much of which is estranged from her now :c Canada built a much tighter COVID vaccination verification and retail enforcement system than the USA. Vertical integration, few gray zones and such made those who opted out feel like the walls were closing in, as your province's health authority knew your vaccine status, restaurant demanded a valid, ID matching government supplied QR Code to allow seating, and the government was willing and able to enforce the law. Comparatively, COVID restrictions were created state by state in the USA, and it was such a spotty patchwork that many who opted not to vaccinate lived much more normal lives than their counterparts in Canada. Much like the universal Canadian deployment of tap and pay, present and pay (the credit/debit card never leaves your hand ever at restaurants or stores), PIN entry for all transactions that would require a signature in the USA, Canada is able to move faster and implement more effectively than the USA.
- mikrotikker 3y agoIt was absolutely authoritarian response the Canadian govt took. Seizing the bank accounts of protesters and supporters? Abusing state of emergency provisions. Absolutely disgusting and horrifying. I mean your family member went a little overboard but the Freedom Convoy certainly didn't and stood up in the face of totalitarianism, when others cowered and yessired. So props to them. Now reports and studies are coming out showing the Canadian govt and many other govts way over reacted to COVID. https://www.independent.co.uk/news/uk/politics/covid-lockdown-study-b2351604.html https://www.independent.co.uk/news/uk/politics/covid-lockdow... https://www.telegraph.co.uk/news/2023/06/22/chris-whitty-scientists-would-not-call-lockdowns-ministers/ https://www.telegraph.co.uk/news/2023/06/22/chris-whitty-sci... https://www.nytimes.com/2023/07/17/briefing/covid.html https://www.nytimes.com/2023/07/17/briefing/covid.html
- lovich 3y agoYea, here’s the main video that lost him a lot of viewers https://m.youtube.com/watch?v=IeYVyhhHY-Y https://m.youtube.com/watch?v=IeYVyhhHY-Y I really enjoyed how he red circled sub clauses of the sentences he think are important and ignores the rest of the sentence in other videos. The guy is legitimately impressive at understanding how tools work and the manufacturing put into them, but he’s an asshole when it comes to dealing with society at large Edit: Really sells it that he fucks up the tooling on his cnc mill while giving a rant about freedom. This was during his “I can’t actually run a cnc mill yet but am learning how phase” but he was leaning on his previous expertise to sell his opinion on the caravan
- VectorLock 3y agoYeah he had funny delivery but the COVID conspiracy shit just made me think "is this guy actually saying anything useful or is he just saying it in a funny way?" Was pretty clear it was just the latter.
- lovich 3y agoWhen he was pulling apart machines and showing me the differences between thermoset and thermomelt plastics, or how much fiberglass was in hardened plastics, or how cast magnesium worked I really enjoyed the guy. I just didn’t enjoy him enough to deal with him going on a giant rant about how covid wasn’t real and the government was suppressing him from his god given right to breathe on us all. I checked through his YouTube channel now and he seemed to have calmed down but I am not concerned about dropping him again if he goes crazy conspiracy theorist for his YouTube channel income once more. And that’s without counting how many videos he had showing off his basic chicken rearing or fucking around and failing at cnc milling
- tempodox 3y ago“This mechanism is the reverse of an infernal combustion engine”. I like this guy.
- vidanay 3y agoThis was my experience with DeWalt too back in the late 80's when they first came out. Sadly, they too have fallen.
- mkoryak 3y agoFrom your roof?
- jacquesm 3y agoIndeed. DeWalt used to be great stuff and now it's just overpriced junk. The one thing they still have going for them is their batteries, those are excellent quality. But that's not a good enough reason to buy a tool. Case in point: I still have a DeWalt drill from 2009's that is still on its original set of batteries. But a hammerdrill I bought for a renovation in 2015 died after moderate use just outside of the warranty and after taking it apart I realized this wasn't an accident but just crappy manufacturing. The mechanism was so delicate it should have never been greenlit and the materials used were sub-standard.
- mikrotikker 3y agoI got one from earlier than that on it's second set of batteries.
- mikrotikker 3y agoI've also rebuilt it a few times with new motors and plastic shells from second hand ones, and on my third set of brushes by now.
- datavirtue 3y agoI tried thier ~$100 hammer drill. Failed immediately. Returned and rented $600 version. I learned to stop buying commodity price-competitive tools from Home Depot. But immediate failure of a hammer drill? The Menards MasterForce lasted longer ($50 POS, also returned).
- 3y ago
- MisterTea 3y ago> I had one of their circular saws which dropped from a roof ... Mine went under in Sandy. Still works. I once accidentally ran my old pipe handled hole hog on 240V for a few seconds. That thing also fell from ceiling height down sideways onto concrete, broke the rear handle, bent the hole saw but it kept working. That is a scary drill. My only gripe with Milwaukee is their corded power tools were redesigned with more plastic so they discontinued the parts for them. My Magnum needs a new brush holder and my screw gun needs a trigger. I really want their mag drill but too rich for my blood so I bought an import that is meh but does the job.
- bombcar 3y agoThe hole hawg is the only tool I own that I’m a bit scared to use and won’t lend out unless I go along with it. That thing will fling you into the next room and break both arms while doing it without even breaking a sweat.
- bbradley406 3y agoThey're not so bad when you have the pipe handle installed, which gives you a lot of leverage over the body of the drill. That being said, even the cordless ones have an absurd amount of power. At my work we use them to send a 3-flute, 1 1/4" auger bit about 5 feet straight through Douglas Fir (drilling concealed electrical wiring chutes in columns). I've seen them roll a 10' 8x8 (~150 lbs) across the sawhorses when someone forgot to clamp it before drilling.
- erik_seaberg 3y agoI really enjoyed Stephenson’s story about those things. > The danger lies not in the machine itself but in the user's failure to envision the full consequences of the instructions he gives to it. https://news.ycombinator.com/item?id=28015229 https://news.ycombinator.com/item?id=28015229
- jacquesm 3y agoI'm with Stephenson on that one and it is the exact reason I ended up buying something smaller. I'm simply not strong enough to properly handle a hole hawg and I also don't have frequent enough work to keep it around doing nothing for extended periods of time. The 'smaller' version I have is a Bosch SDS-max capable drill that still makes short work of anything I throw at it but I can imagine jobs where it wouldn't be able to match the hole hawg's capabilities (or frankly, to even come near it). These aren't toys and you should get what works for you, not just what looks impressive. Another brand I still like after many years is Makita, I've yet to have something made by them break from normal use. DeWalt has lost the plot, they are no longer worth the premium price. And with Bosch it's hit-and-miss you have to do a lot of online reading before making the call on one of their tools. They are very efficient in their use of materials and sometimes they can be too efficient and deliver a tool that isn't up to snuff. But they are always price competitive.