4 ms·
I struggle to understand the appeal of these more premium ESP32 boards. I’m gonna throw the same code on it. It’s an ESP32 either way. What exactly am I buying
by Havoc 3y ago
I struggle to understand the appeal of these more premium ESP32 boards. I’m gonna throw the same code on it. It’s an ESP32 either way. What exactly am I buying here for that 3x price
- AnotherGoodName 3y agoJust for prototyping ease tbh. You would always make a custom board for an actual mass appeal product. If it's not a mass made product why do you care? Pick the easiest one regardless of cost. This is essentially a dev kit. With the ability to easily mess with it. You don't care about the cost here because it's not really an expense when amortized.
- xd1936 3y agoI think they're asking, why would you spend $20+ on a board like this when something like a Lolin S2 Mini[1] is $4? There are millions of ESP32s out there... What makes one from Arduino™ any better? 1. https://a.aliexpress.com/_mspsSKa https://a.aliexpress.com/_mspsSKa
- kube-system 3y agoBecause the difference between $20 and $4 is nothing if you're prototyping for a real product and you may prefer to have business partners in Europe. Many companies easily drop a $10,000+ premium for a prototyping kit every day of the week to get support from a preferred vendor. If you give one employee making 150k/yr a 10% productivity boost, you're saving money. Prototyping cost is often mostly labor. Unit cost doesn't really matter as much until you're talking about the production BOM. Some rough math, for an employee with a 200k fully loaded cost working 1800/hr/yr, the difference in the price of those boards is about 8-9 minutes of labor. So if it's 10 minutes quicker to get the documentation for the Arduino -- it's cheaper.
- vachina 3y agoToday I learned prototyping on an Arduino makes my product more real
- dymk 3y agoAre you planning on selling it?
- Takennickname 3y agoYou misunderstood what he was saying.
- kube-system 3y agoAllow me to rephrase: If you are prototyping for mass production, $16 is probably a rounding error in your prototyping costs.
- skybrian 3y agoIt sounds like you're saying price doesn't matter while prototyping, so choose what's convenient. But what's better for prototyping? A Raspberry Pi Pico W has a better SDK and better documentation, so why not go with that? (It's also $6.)
- steve_gh 3y agoPower consumption. Maybe not so much on the Dev board, but IIRC I can get an ESP32 down to lower power consumption on a custom board. So I might well start developing on an ESP32 board knowing that my final target is an ESP32 custom board.
- petre 3y agoIt doesn't even have on chip wireless and the drivers are proprietary. Also external flash that can't be protected using fuses. If's fine for hobby level stuff, but that's about it. If you want to make a product and not have it cloned and the firmware copied, good luck. Also the ESP32 has a power management coprocessor allowing it to.operate on batteries, wake up and do stuff, then go to sleep. The RP2040's highlight is the PIO and the ease of deployong the firmware, although I find flashing the ESP chips much more straightforward. Anyway, there are still issues with the official 1.20 and 1.19 micropython esp32 spiram images throwing random guru meditation error messages from esp-idf. I'm using it them with several ESP32 WROVER modules, they all crash in the same ways. Maybe I waste 19€ plus shipping on a Nano ESP32 to see if it still crashes on the U-blox module.
- blackbeans 3y agoIt has 4 times the amount of flash, comes with Arduino Cloud, has a wide range power supply, has the Nano form factor and buying it supports Arduino. For professional prototyping I always buy Arduino, for home use the cheaper variants are fine too.
- civilitty 3y agoPrototyping with an ESP32 is a lot easier with a $6 breakout board [1]. Still comes out cheaper than TFA Nano without headers. [1] https://www.amazon.com/KeeYees-Breakout-ESP-WROOM-32-Microcontroller-Development/dp/B09PYW1HC9/ https://www.amazon.com/KeeYees-Breakout-ESP-WROOM-32-Microco...
- AnotherGoodName 3y agoThis looks to have better software with it though. I get that you can probably port between but i'm happy to pay a few dollars to save my own time here. We're talking $4 vs $16 for a board for engineers that cost much more than that an hour. Pick whatever you like. In fact go buy both and play with both the above and this. The cost is literally nothing. These boards are not what goes into a large production run product.
- civilitty 3y agoThat has not been my experience at all as a user. ESPHome is even easier than Arduino and I haven’t touched firmware code in years. The price makes a huge difference when you have dozens of them operating which is trivial with a decent hydroponics and smarthome setup. I also have a dozen boards just sitting idle ready to be called up to replace a failed one or use for a new project because they’re so cheap. Not to mention the Arduino core is supported officially by ESP32: https://github.com/espressif/arduino-esp32 https://github.com/espressif/arduino-esp32 Who actually uses Arduino in production? Everyone just uses modules (for ESP32) or rolls their own using the Arduino board as a reference. They’re so simple the NRE is definitely worth the unit cost if you’re already rolling a daughter board at 1k units.
- Jochim 3y ago> This looks to have better software with it though. I get that you can probably port between but i'm happy to pay a few dollars to save my own time here. There's no porting involved, you'd literally just flash the chip the same way you would if you were updating the firmware. As a hobbyist, the price difference matters when I want to put 5 or 10 boards around the house, or inevitably fry some.
- TDiblik 3y agoHi, just asking, I'm interested in embedded but as an outsider I fail to understand how would I go about making custom board? I googled a lot, but I still fail to grasp how do you make the board? How do you program the chip? How can you test your board? How can you prototype on an arduino, if you'll use different architecture STM vs Atmega, etc... I've done some arduino projects using VSCode and Platformio and I want to level up my skill level, however I've been struggling to find a resources that goes throught the process of actually making the product from scratch (starts with nothing and ends with a programmed product on custom board). For example, I have this project of mine where I make smart watches using an arduino and e-ink paper display. I would like to read / watch a resource where I learn to design a board that has custom STM32
- TDiblik 3y agochip on it, e-ink display sawthered on and etc, just get me from my prototype to a full on product. Basically, I want to advance my skills to the next level, but I struggle to find how :/ .... you seem to have experience in this kind of stuff, could you please answear some of these questions? Ps: accidentally posted before I finished the comment and using mobile client without ability to edit comments :d Ps2: these comments are kinda out of context, but it's something that's bothering me for more than a month now.
- AnotherGoodName 3y agoIn theory you can play with KiCad and draw something up. There's lots of tutorials on KiCad. There's always ESP32 layouts online you can start from too. You can probably figure out how to connect the memory bus to your peripherals correctly but there's always mistakes to be made. That's why it's slightly harder than a minor hobby imho since you really want a full electronics bench including logic analyzer. So it's a big expensive hobby. If you really want a custom board I'd honestly prototype with a dev kit board like the above and then contract out what you really want to a board design company, showing them your hacked up prototype. Expect $30k for an ESP32 layout that precisely does what you want with no fluff and minimal expense. You then send that off to a PCB maker for the first run and test when it gets back. If all is well you send it off again for a larger more cost effective run.
- LeafItAlone 3y agoCompared to what?
- testmasterflex 3y agoAn Esp32 devkit board on Ali eg
- Shawnj2 3y agoSince this is an Arduino product it would presumably be compatible with existing Arduino code and would be easier to get started with than the cheaper ones since it would have built in support within the Arduino IDE. If you’re teaching an Arduino class or have a setup that already uses an Arduino this could be easier to teach people to use than the regular ESP32, in addition to expecting higher quality QC processes and support from both the general Arduino community and the manufacturer. Obviously if you know what you are doing and have appropriate expectations for a $5 ESP32 board that would work well for your use case and can set it up easily without special instructions or a user guide you may want to use those for most of your use cases, but there is a reason people buy the more premium brand name options, especially businesses. Same deal as the raspberry pi- the Pi isn’t as powerful as a lot of other boards and is more expensive than other boards in its class, but people use it because of the support.
- Evidlo 3y agoPin compatibility
- testmasterflex 3y agoComp with what?
- jmrm 3y agoPeople who don't want to mess around with low level configuration. For me, using an Arduino is the equivalent of prototyping a software in Python instead of doing it in C. I haven't used any Expressif product, but is easy to find a problem or a bug while programming a MCU if you're new with it, and you don't know exactly what registers you need to edit to configure to set up the hardware correctly, or if there are hardware details, like the use of multiplexing in pins, to deal with. With Arduino you can forget a lot of the smaller details, and you only have to know what pins to use, how you want to use them, what devices use, and the simple functions Arduino gives to you to use them (which are commom across most of boards).
- Ballas 3y agoYou can use arduino with any of the cheap ESP32 boards as well. That does not distinguish this particular board, with it's 3x price tag from others.
- hyperbovine 3y agoThis has not been my experience at all. Random cheapie ESP32 board bought off Alibaba performs/is exactly the same as expensive one with better marketing bought off Adafruit, Sparkfun, etc.
- tomn 3y agoYes, but "does it work" is a low standard. - You don't get any documentation, whereas with something more official you will have a complete schematic (so you know which support components will be used), pinout, information about power supplies etc. - You can't rely on being able to buy the same thing again. Even if you find something with the same pinout, small changes to the power supply or usb-serial converter can ruin your day. - Shipping will probably take a while (or you're buying from a local re-seller, increasing the cost). Your company probably doesn't have a process for buying from aliexpress, but orders from digikey all the time. - I've not had a problem with development boards, but plenty of cheap electronics in the same category are really badly designed; a random memorable example: https://www.aliexpress.com/item/1005001621800502.html https://www.aliexpress.com/item/1005001621800502.html . They have had their issues, but arduino stuff does tend to be well designed, and vendor development boards are usually reliable too. - Stuff like the feather ecosystem can be genuinely helpful when prototyping if the cost isn't an issue. I chance the cheap stuff for personal projects, but if work is paying I'd go for something more expensive every time (and probably wouldn't have a choice).