3 ms·
YouTube videos about metalworking are how I learned there are several degrees of burn worse than 3rd degree. I’ll spare you the gorey details, but molten metal
by hinkley 3y ago
YouTube videos about metalworking are how I learned there are several degrees of burn worse than 3rd degree. I’ll spare you the gorey details, but molten metal is not something to fuck around with on a whim. You’re basically lion taming as a hobby. Disrespect the “cat” and it’ll eat your liver.
I might some day try forging, but I’ll leave casting to the experts.
- actionfromafar 3y agoIf you can do it with some remote controlled contraption and wait 24h until everything cools off before entering?
- hef19898 3y agoI started forging, knives for the time being, a while ago. Once I graduate to swords, I already have some parts I want cast in bronze. Which is, apparantly, easier to do than metal casting. In the speed I work on this stuff so, ask me again in 5-10 years whether or not it is actually true...
- jacquesm 3y agoBronze casting is metal casting.
- hef19898 3y agoHah, there I read metal as iron/steel in my head... it surely is hot round here...
- jacquesm 3y agoIf I may suggest: if you want to get into this stuff start off with lost foam (xps for best results) casts in Aluminum. It's probably the simplest process (after casting lead...) and it will at least give you an idea of the basics before more complicated moves.
- zrobotics 3y agoTip for future you: start with aluminum, it's much more approachable. Just make sure your feed stock is a castable alloy, stuff like t6 or cans will make terrible castings. Easiest way to do this is to use chunks of scrap that you know were cast, so look for signs that the original part was cast like mold lines or unmachined surfaces. The reason to start with aluminum is the temp is way lower so it's much easier to build the furnace and the metal is cheap and readily available. You aren't wasting your time, since all the basics of mold design still apply such as controlling shrinkage and preventing freeze off. Paul's garage on YouTube has some excellent videos that cover the process in an instructional way, many of the other channels that cover casting just focus on the finished project. While very cool, these videos aren't always super helpful for a beginner. People also hate on the gingery books, but there is a wealth of super useful information there and the fundamentals haven't changed. It's a super fun hobby, especially if you're already into blacksmithing. But do be careful and definitely heed the safety warnings, there is definitely the potential for an explosion or very harmful fumes.
- hef19898 3y agoThanks for the tip with aluminium, I'll keep that in mind. Once I get to it so, I'm already 8 months late on my son's kukri... Lucky for me so, the maker space I forge at, sometimes, has a blacksmith that drops by. So if I need help, there is a pro available!
- defrost 3y agoMetal spits and sticks to flesh, it's nasty. Metal poured into anything with latent moisture (damp ingot tray, etc) is a steam powered mini bomb with molten shrapnel. Glass working, hot or cold, is much better for your mental health, it doesn't spit or stick.
- hinkley 3y agoThe steam bomb scenario is the most alarming scenario to me. Though I’ve seen people destroy their garage floor as well.
- HideousKojima 3y agoNah, the scariest is that aluminum, like other alkali metals, literally explodes when it comes into contact with water. This is extremely rare with aluminum since aluminum quickly forms a layer of oxide, and even when casting it's unlikely to happen, at least in hobbyist foundries. You can even find videos of idiots pouring molten aluminum into a swimming pool to show that it's "safe" and nothing bad happens. But the possibility is very real, and while it's pretty dang unlikely there's no good reason to intentionally pour your molten aluminum anywhere near water. Edit: found a Hackaday article that covers this in more detail https://hackaday.com/2020/12/30/water-and-molten-aluminium-is-a-dangerous-combination/ https://hackaday.com/2020/12/30/water-and-molten-aluminium-i...
- jacquesm 3y agoAluminum makes it worse but steam explosions as such are nothing to sneeze at. And there are quite a few ways to inadvertently set you up for one.
- defrost 3y agoYep. A classic video of the most common lab mishap with molten metals gets discussed to death here: https://www.youtube.com/watch?v=KQjud8VCTYc https://www.youtube.com/watch?v=KQjud8VCTYc It's rare to find anyone who's ever done home casting that hasn't had a similar near miss at least once in their early days. It's funny to look at .. but all it take to escalate is for molten drops to land on bare skin or flammable rags.
- rewmie 3y ago> YouTube videos about metalworking are how I learned there are several degrees of burn worse than 3rd degree. Isn't 4th degree the last stop? https://www.urmc.rochester.edu/encyclopedia/content.aspx?ContentTypeID=90&ContentID=P09575 https://www.urmc.rochester.edu/encyclopedia/content.aspx?Con... After burning through muscle and bone, there is not much beyond that to warrant another level in the classification. In fact, some classifications just end in 3rd degree, and bundle muscle and bone damage in it.
- print_goto_ten 3y ago>After burning through muscle and bone, After bone its muscle and skin as it comes out the other side.
- hinkley 3y agoI'm not sure why you'd classify everything up to destroying the skin as 1-3 and then label 4 as destroying bone. This one goes to six: https://nigms.nih.gov/education/fact-sheets/Pages/burns.aspx https://nigms.nih.gov/education/fact-sheets/Pages/burns.aspx
- rewmie 3y ago> I'm not sure why you'd classify everything up to destroying the skin as 1-3 and then label 4 as destroying bone. I'd wager that from a medical standpoint there is no functional difference between burning through fat layer, or going even deeper and hitting muscle and/or bone.
- hinkley 3y agoAnd yet the NIH says six.