4 ms·
One might also imagine a constant current DC power distribution system with all houses in series that could have been deployed in the 20th century. The power
by londons_explore 3y ago
One might also imagine a constant current DC power distribution system with all houses in series that could have been deployed in the 20th century. The power company provides 1 amp constant current, and if you don't want to use any power, you short it out. If you want to run a lightbulb, you put your 1 amp through a lightbulb. If you want to run two bulbs, you put the current through 1 bulb and then the next in series. A 'fuse' would, instead of breaking the circuit, would provide a low impedance bypass for any faulty equipment if it detects an overvoltage event - easy to implement with a solenoid. Entire houses and streets could be fused in this way too, to ensure an open-circuit never occurs.
On the power generation side, DC generators and batteries can be switched in and out to adjust the voltage as necessary to maintain the constant 1 amp promised to subscribers.
Metering can be done with a small clock motor and coil of wire and a spring to integrate voltage over time.
Such a scheme is probably cheaper because it requires no transformers.
- mark-r 3y agoTransformers though are the key to efficient power distribution. The power losses on running low voltage everywhere would be a killer.
- InitialLastName 3y agoImagine the world where every house has a substantial DC potential relative to their local earth (and the plumbing), and where switching any inductive loads causes significant arcing. What fun could be had! I am excited that POE has finally provided us a way to run DC power in walls, but that is only approaching useful now that many loads in houses are DC at the endpoints.