3 ms·
Your best bet would probably be starting with an iFixit guide[0]. Even if they don't have the exact thing you want to do, some of the guides will just help you
by godelski 3y ago
Your best bet would probably be starting with an iFixit guide[0]. Even if they don't have the exact thing you want to do, some of the guides will just help you learn a lot. The first time I took part a phone I was terrified because they are expensive and I didn't have a lot of money, but I quickly learned how easy it was. It looks much harder than it is, just be patient and go slow (especially when removing the screen). Here's an example guide in how to replace the earpiece on the pixel 7 pro[1]. I chose this because it is a more involved process and because one of the microphones are in that speaker (sorry, gotta disconnect both). It may look complicated, but the number of steps is because of the thoroughness of the guide, not because of complexity. To modify this guide to your goal, all we'd need to do is find where the (other) microphones are. Which for this, that isn't hard since they have to face the outside and Google even tells us[2] (note that there are 3). Not a schematic, but we at least know the location and should be able to reason it out. What also helps in this is a teardown guide, which we can find a video version for this phone here[3], where he does mention the location of the microphones too.
I hope this helps. Just be aware that sometimes components are coupled or you may need to do some minor soldering (which in this case, is probably necessary). The good news though is that if you intend to NEVER use the microphones again, then this is much easier because if you do a little damage then it doesn't matter. To remove those surface mounted mics shouldn't be that hard, but again, patience is key. Use the largest (preferably flat tip, like a flathead screwdriver) soldering iron tip you can get in there and just push (since we're not worried about repair, you don't have to be as concerned about heat).
[0] https://www.ifixit.com/Guide https://www.ifixit.com/Guide
[1] https://www.ifixit.com/Guide/Google+Pixel+7+Pro+Earpiece+Speaker+Replacement/154518 https://www.ifixit.com/Guide/Google+Pixel+7+Pro+Earpiece+Spe...
[2] https://support.google.com/pixelphone/answer/7157629?hl=en#zippy=%2Cpixel-pro https://support.google.com/pixelphone/answer/7157629?hl=en#z...
[3] https://arstechnica.com/gadgets/2022/10/pixel-7-pro-teardown-shows-better-cooling-cleaner-layout-than-last-years-model/ https://arstechnica.com/gadgets/2022/10/pixel-7-pro-teardown...
- boring_twenties 3y agoThis is awesome, thank you! I am a noob at soldering but I have done a tiny bit before. Maybe I can get this done after all!
- godelski 3y agoI'd say that this is going to be one of the easiest surface mount (SMD) soldering jobs you'd ever do. Removing is easy, adding is hard. Fwiw, my first time doing SMD I was really nervous but then found it to be quite easy and so it opened up a lot of things for me (making and repairing). It is much easier than you think (often easier than through hole!), just when placing something you need to hold it in place (or use a heat gun, making these sometimes easier). Here's a short video if you want some guide[0]. As for soldering tips, any would be fine, but I learned that the flat tips, like this[1], tend to be my goto rather than the pencil like tips. The mass helps it keep heat and the larger surface area helps you transfer that heat. [0a] Great demo, showing simplicity: https://www.youtube.com/watch?v=5uiroWBkdFY https://www.youtube.com/watch?v=5uiroWBkdFY [0b] A bit more detailed and Dave is just always extremely entertaining and a wealth of knowledge (notice his "go to" tip. Professionals use chisels ;) : https://www.youtube.com/watch?v=hoLf8gvvXXU https://www.youtube.com/watch?v=hoLf8gvvXXU [1] https://www.amazon.com/UY-CHAN-Original-Soldering-Replacement/dp/B06XYR3VTJ https://www.amazon.com/UY-CHAN-Original-Soldering-Replacemen...