4 ms·

So, this is why Edward Snowden takes out the microphones out of his phones manually. https://www.indiatoday.in/technology/features/story/when-edward-snowden-ge

So, this is why Edward Snowden takes out the microphones out of his phones manually. https://www.indiatoday.in/technology/features/story/when-edward-snowden-gets-a-new-phone-to-protect-his-privacy-this-is-what-he-does-1834292-2021-07-29 https://www.indiatoday.in/technology/features/story/when-edw...

2-718-281-828 3y ago
the highlighted thing is a microphone? i can't find anything about it googling for "s1457 4257". usually this leads you to specs etc.
- bhaney 3y ago
  > the highlighted thing is a microphone? It's a typical SMD MEMS microphone, yeah > i can't find anything about it googling for "s1457 4257". That's because "1457 4257" is that particular unit's Job Identification Number, and the "S" at the beginning indicates that it's a production unit rather than a test or sample. There's no part identifier on it.
  - 2-718-281-828 3y ago
    how is it exposing a membrane? it looks like solid piece of plastic.
    - bhaney 3y ago
      There's a hole in it, you just can't see it from that angle. Bottom port mics, where the hole is in the underside of the package and there's a matching hole in the PCB to allow sound in, are more common (and typically perform better) than top port mics, where the hole would be visible from the top side of the package. Both kinds do exist though.
      - 2-718-281-828 3y ago
        interesting. i lack the competence to solder around on a smartphone pcb. would it be sufficient to just poke the hole with a needle or drop a small amount of super glue i/onto it?
        bhaney 3y ago
        Probably. There's a membrane past the hole that you can destroy and I doubt the mic could function well enough to worry about if you punctured it. But I usually just crush the whole mic package with pliers when I need to remove one. They pry off the board pretty easily in my experience.
tbronchain 3y ago
But soon is going to be obsolete if you have wifi at home... https://arxiv.org/abs/2301.00250 https://arxiv.org/abs/2301.00250

2-718-281-828 3y ago

the highlighted thing is a microphone? i can't find anything about it googling for "s1457 4257". usually this leads you to specs etc.

bhaney 3y ago
> the highlighted thing is a microphone? It's a typical SMD MEMS microphone, yeah > i can't find anything about it googling for "s1457 4257". That's because "1457 4257" is that particular unit's Job Identification Number, and the "S" at the beginning indicates that it's a production unit rather than a test or sample. There's no part identifier on it.
- 2-718-281-828 3y ago
  how is it exposing a membrane? it looks like solid piece of plastic.
  - bhaney 3y ago
    There's a hole in it, you just can't see it from that angle. Bottom port mics, where the hole is in the underside of the package and there's a matching hole in the PCB to allow sound in, are more common (and typically perform better) than top port mics, where the hole would be visible from the top side of the package. Both kinds do exist though.
    - 2-718-281-828 3y ago
      interesting. i lack the competence to solder around on a smartphone pcb. would it be sufficient to just poke the hole with a needle or drop a small amount of super glue i/onto it?
      - bhaney 3y ago
        Probably. There's a membrane past the hole that you can destroy and I doubt the mic could function well enough to worry about if you punctured it. But I usually just crush the whole mic package with pliers when I need to remove one. They pry off the board pretty easily in my experience.

tbronchain 3y ago

But soon is going to be obsolete if you have wifi at home... https://arxiv.org/abs/2301.00250 https://arxiv.org/abs/2301.00250