3 ms·
It looks like they were testing this at at least 50C, which IMHO is far too hot for RAM to be. I wonder what the industry response to this will be. RowHammer w
by userbinator 3y ago
It looks like they were testing this at at least 50C, which IMHO is far too hot for RAM to be.
I wonder what the industry response to this will be. RowHammer was memorable because they managed to convince one widely-used memory testing tool to not run the tests by default because too many systems would fail.
Regardless of access pattern, if you can get memory to not read back exactly what was written to that address, the hardware is just plain broken.
- jepler 3y agoI found a Micron datasheet that specifies that (some of?) their commercial DDR5 modules are specified for operation up to 95°C, though the refresh rate must be doubled above 85°C. (https://media-www.micron.com/-/media/client/global/documents/products/data-sheet/modules/unbuffered_dimm/ddr5/ddr5_udimm_core.pdf?rev=fdbd9476506c4e019360a5e402827caa https://media-www.micron.com/-/media/client/global/documents... page 13) This matches what's in the DDR5 specification itself (https://raw.githubusercontent.com/RAMGuide/TheRamGuide-WIP-/main/DDR5%20Spec%20JESD79-5.pdf https://raw.githubusercontent.com/RAMGuide/TheRamGuide-WIP-/... pdf page 320 / table 392)
- mips_r4300i 3y agoTypically commercial RAM has a temp range of 0 to 85degC. In the olden days, you constrained your IO timing on the device/chip that drove the ram so that it worked at all temperatures at the rated speed. (Well, unless you were a 90s graphics card integrator...) Now, at least since DDR3, PVT variations are continually calibrated out at runtime. So as the temp goes up, you still get periodic, quick recalibration. DDR4 and now 5 have even more extensive compensation to keep the electrons flowing at the edges of our current ability. Did you know that GDDR5 has had the ability to CRC data bursts since 2008? Now it's come down to normal memory.