3 ms·
The weight of the tether doesn't matter when it is in water. You just design it to be neutrally buoyant. Either using mini pressure vessels or tanks of lig
by londons_explore 3y ago
The weight of the tether doesn't matter when it is in water. You just design it to be neutrally buoyant. Either using mini pressure vessels or tanks of light oil.
- WalterBright 3y agoNeutral buoyancy varies by depth, because water compresses. You'd have to have a tether with the same density of water and the same compressibility.
- londons_explore 3y agoThe compressibility of water is fairly negligible - the density increase is only 1% for every 2 kilometers of depth. And obviously the cable also compresses at depth - probably by a similar percentage,
- carlosjobim 3y agoThe metal wires in the tether is heavier than water. This is balanced by twining air/gas hoses into the tether. Gas compresses by 50% for each 10 metres of depth in water, so that's a whole different scale.
- londons_explore 3y agoYou either put floats (ie. Gas chambers of fixed volume) or sealed tanks of a light liquid, for example kerosene. For high depth like this, tanks of a light liquid are probably most suitable. I'd probably use liquid butane. With a vapour pressure of 40 psi, it is easy to contain, and is has a density of only half of water. If it leaks, there won't be an environmental cleanup cost either.