3 ms·
I can add some details, namely that the USofA began development on the SR-71 in 1957 | 1958 at which time the only ilmenite mine in Australia was a relatively l
by defrost 3y ago
I can add some details, namely that the USofA began development on the SR-71 in 1957 | 1958 at which time the only ilmenite mine in Australia was a relatively low volume affair in Bunbury, Western Australia.
Ilmenite is named after the Ilmenski mountains in Russia where the mineral was first discovered in relatively free abundance, the other principle source for titanium is rutile sands .. typically volume access to rich old sand layers requires strip logging of large areas of old growth forest to then remove acres of overburden to then hoover up a band of sands.
Circa late 1950s if you wanted large volumes of high grade ore your choices were pretty much Russia and ..., err, Russia.
( That or subsidising mineral exploration at scale and developing other sources .. which did happen but over a longer timescale .. meanwhile the first flight of the SR-71 was in 1964 )
There's more on the mining apects at the Geoscience Australia page:
https://www.ga.gov.au/education/classroom-resources/minerals-energy/australian-mineral-facts/titanium https://www.ga.gov.au/education/classroom-resources/minerals...
- Dork1234 3y agoFirst flight of A-12 the airplane that became the SR-71 was 1962. Shortening the time frame needed to acquire material. Machining of titanium is very time consuming as well.
- masklinn 3y ago> Machining of titanium is very time consuming as well. And it was way worse back then given it was a field being actively developed. Not to mention the development and characterisation of titanium grades and alloys, and their treatment (heat and solution). According to the wiki, at some points Lockheed has to reject 80% of the titanium they got due to metallurgical contamination, and they had to rebuild tooling and processes because of corrosion issues with chlorine (from tap water) and cadmium (from tools plating).