148 ms·
I made a mechanical keyboard with 3D-printed switches (2020)
- regularfry 3y agoMentioned on that page in passing, but now more developed, https://www.youtube.com/@Riskable3DPrinting https://www.youtube.com/@Riskable3DPrinting has been working on magnetic, analogue keyboard switches: https://hackaday.com/2021/08/02/mag-lev-switches-are-the-future-of-clacking/ https://hackaday.com/2021/08/02/mag-lev-switches-are-the-fut...
- hoosieree 3y agoThat "Void" switch design is so elegant. Being able fine-tune the activation force and even change from linear to tactile with just a different magnet arrangement is so cool.
- Roark66 3y agoPretty cool stuff for a hobbyist, but aren't keyboard switches essentially the last product one would want to 3d print en masse? Injection molding hundreds of thousands of them is an extremely efficient method of manufacturing and it gave us a huge choice of great switches that cost ~$1 a pop, don't require soldering for replacement and last a very long time.
- maxmalkav 3y agoIndeed. Moreover the smoothness, consistency and tolerance of the switches is a fundamental part of the hobby nowadays. But pretty cool stuff in the line “because we can”.
- DJBunnies 3y agoThe tolerance must be a nightmare
- PhunkyPhil 3y agoThis guy sent me the STLs for these and I tried printing them. I only have an Ender 3 and am a very light hobbyist but I calibrated for hours and got some really nice prints of them but still couldn't get it to be remotely working/smooth.
- 908B64B197 3y ago> but aren't keyboard switches essentially the last product one would want to 3d print en masse? Yes. Or at least use resin. To me it's the difference between craft and engineering; nobody would consider hand-crafting (or printing) switches when they can source high quality parts for cents. 3d printed cases aren't that special. There are a lot of hobbyist making those.
- davidgerard 3y agoI love that he calls it "genuinely the worst keyboard I have ever used" but considers the project a success.
- JimtheCoder 3y agoMaybe his goal was to make a bad keyboard...
- ilyt 3y agoOr excuse for wasting time
- yjftsjthsd-h 3y agoTime you enjoyed wasting was not wasted.
- two_handfuls 3y agoTo be fair usually the goal of a do-it-yourself is to learn or achieve something you personally hadn’t before. I think they achieved a lot and I’m glad they maintained a positive outlook while also being honest with their audience.
- jandrese 3y agoI think he's overselling it. I've used some truly heinous keyboards in my life and I'm sure this is better than at least some of them. I had a roll-up keyboard where every time you hit the key you had to hit it dead center or the top of the key would tilt away and cause your finger to smack the adjacent key. I had another keyboard that was just projected on a tabletop with a laser and would correctly read keypresses maybe 95% of the time. Just good enough to be infuriating without being useful. I've used chicklet keyboards on 80s computers. Membrane keyboards where there is only a bubble in the plastic sheet to press down on. There is no way this is the worst keyboard ever.
- ezconnect 3y agoThe mechanism of the current optical mechanical keyboard is very simple and easy to 3D print like the Razer Huntsman optical keys.
- gnramires 3y agoMight be a motivation to make a fully analog keyboard as well :) (for example in a game moving slowly->full speed, controlling wheels, etc)
- readyplayernull 3y ago> The switches are printed in PETG. If you want to see them in action, you might enjoy my video of operating the switch tester. The final incarnation of the switch design lasted over 350k presses in all cases, and some instances still hadn't failed at 500k presses. This is a lot lower than the "tens of millions" that might be expected of a commercial switch It would be interesting to know whether that keyboard still works after 3 years if not reaching those numbers, my impression is that plastic becomes brittle with time, specially under sunlight. Those quality measures seem meaningless as devices get a little old. For example the screen of my Galaxy Z Flip3 started breaking by the middle after just 2 years with average use.
- AlphaSite 3y agoDepends on the specific plastic you choose, some are more sensitive to UV than others and you can choose the one with the appropriate properties for your usecase. That said, I don’t imagine the switches them selves have much UV exposure as they’re under the keycaps.