3 ms·
Are you sure the iPhone power supply has no transformer? I haven't cracked one open but I'm guessing it has one. Increasing the switching frequency allow a re
by klodolph 15y ago
Are you sure the iPhone power supply has no transformer? I haven't cracked one open but I'm guessing it has one. Increasing the switching frequency allow a reduction in core size, and with frequencies in the 1 MHz range these days the transformers are pretty small. (Further increases are not recommended due to increased hysteresis loss.)
The 2-way communication is already there, your wish has been fulfilled. Okay, not all DC equipment has it, but that's how USB works. You plug into a USB port you get up to 100 mA free, you can negotiate to increase the limit up to 500 mA. Apple's iPod/iPhone/iPad chargers put nonstandard voltages on the data pins to indicate to the device that they can supply some larger amount of current, like 1A or 2A or whatever. Different voltages on the data pins correspond to different current limits. (So for the chargers it's one-way communication, not two-way like USB, but the two-way communication isn't needed for chargers that only plug into one device.) This isn't the first time Apple messed with the USB power specs, if you had a G4 cube back in the day you'd notice that the speakers would only work if plugged directly into the Mac, which supplied 800 mA from its USB jacks.
Personally, I think it's pretty dumb that USB only supplies up to 500 mA -- that's just 2.5 W. Meanwhile, Firewire could supply up to 45 W, which is why Firewire hard drives don't need to plug into the wall.
- SuperFungus 15y ago"Further increases are not recommended due to increased hysteresis loss." This is why I am REALLY hoping the materials revolution everyone keeps talking about takes off and we get some decent high frequency, high permeability, low loss, high flux density ferrites out of it (not too much to ask huh?). You can do lots of cool stuff with magnetics, even beyond just power conversion but the materials to do it really well just dont exist.
- klodolph 15y agoI said hysteresis loss, but that's just the first barrier. Higher frequencies are also subject to the "skin effect" which requires thinner wires, therefore more wires or ones with lower resistivity (e.g., superconductors). Then you need to get transistors capable of handling the increased switching frequency, and you need to be able to deliver the increased drive current to the transistors.
- SuperFungus 15y agoYou don't need superconductors to get around the skin effect. It's actually interesting that you mention superconductors, as the skin depth in a perfect conductor is actually zero. (Anyone know what happens at DC in theory in a perfect conductor? I originally thought it was zero at DC as well, but to me skin depth seems like it becomes undefined.) Even without superconductors, at 100 MHz the skin depth is still around 2 thousandths of an inch. Litz helps too. High power RF transistors exist. All the things you mention are limiting factors, but I still say the lack of good magnetic materials is the dominant barrier to higher frequency converters.