4 ms·
They do when you're the one doing the repairing. Or a friend you repay with a couple of beers. Pretty common in the 80s, and this is what we should go back to.
by wkat4242 3y ago
They do when you're the one doing the repairing. Or a friend you repay with a couple of beers. Pretty common in the 80s, and this is what we should go back to. Sure, electronics has become a lot more complex since the 80s but we also have a lot better tools for the job now.
I'm one of those friends for many people :) In the last month alone I've fixed several devices. Some of which sex toys which caused great amusement of my makerspace friends - I have some kinky friends :P I already have a job so I just do it for fun, and it is actually quite fun. Every device is another little puzzle.
Some I couldn't repair because they were simply too horribly built though. There was one electrified whip that was dropped once and the paper-thin PCB broke and 3 internal components snapped too, one of which (transformer) had wiring so thin it was like a hair. The whole BOM was a couple dollars at most, and it was sold for almost a hundred. That stuff is really not worth fixing. I feel bad for the engineers being forced to design something that crap. Nobody does that willingly.
But on quality electronics my fix rate is pretty high. Very very often it's simply a worn out electrolytic cap. Even Samsung puts ones with too low a temp rating in 4000+ euro display screens. It's ridiculous. Seriously, caps, connectors "secured" to the board by only the solder joints, sometimes some onboard fuses. Easily make up 50% of electronics failures. It's not rocket science.
Mechanical stuff fails a lot too, often in ways that are clearly designed to fail. Buttons pressing on a stem that's so thin it's clearly designed not to last. I often design and 3D print replacements that will last forever.
- JohnFen 3y ago> Or a friend you repay with a couple of beers. In the last month, I've repaired a couple of lighting systems, a television, and two computers for friends.
- wkat4242 3y agoYeah especially TVs right? Every single one of them it's been the caps. People mount them right up to the wall, the heat can't get out, and the caps dry out. Then they stop turning on, or start flickering, or randomly failing during high brightness scenes. Always the same story. It's always fun when I replace the failed one and most of the ones at risk as a precaution, and then I tell them what the (120 C rated, usually much higher than the originals) parts cost... :') It's a pain finding the right ones in stock though sometimes. I always feel so bad when I see a 70" TV beside the trash bin, usually with something heavy on top so the panel is already cracked :( Most people just call the manufacturer, they tell them it's out of warranty and "can't be repaired" and chuck it :'(
- JohnFen 3y ago> Yeah especially TVs right? Every single one of them it's been the caps. Yep, TVs are particularly good targets. I knew someone who would make extra money by trawling around neighborhoods looking for TVs that have been ditched, recapping them, and selling them.
- dfox 3y agoLCD TVs and even computer displays are somewhat notorious for dodgy power supply designs. I assume that it is because CRT TVs and displays were essentially an one giant SMPS and that reasoning was reused for later LCD based designs.
- 7speter 3y agoI wonder if theres some widespread issue with older asus monitors, because they are rather notorious for this “no signal” bug, where if you turn them on plugged into an hdmi even 100 or so times, the monitor doesn’t register an input.
- OJFord 3y agoI tried to repair a TV recently, I really thought it was going to be a cap (not that I've repaired one before) but seems it was a backlight issue, and that it's common for the model. Although in a way that it could somehow detect it seems, and refuse to do anything. Front light behaviour etc. wasn't normal, it wasn't merely that it was unlit. It's still sitting there at the moment, but it's for the dump unfortunately. (I have a better one to pass on due to my own upgrade, and actually they're renting a new place that will likely come furnished with one anyway.)
- wkat4242 3y agoOlder TVs have CCFL backlight that ages (and browns). Just like fluorescent tubes. LED backlights are much better in this way. And they don't contain mercury. Indeed a CCFL is hard to replace, but if it's LED it's probably something in the driving circuitry. Take out the driver board and get someone more electronic minded to look at it, it might still be something simple.