3 ms·
Having tried both, prop fans seem to beat centrifugal fans for the pressure drop across typical filters, and deliver more air per watt through a filter. I susp
by londons_explore 3y ago
Having tried both, prop fans seem to beat centrifugal fans for the pressure drop across typical filters, and deliver more air per watt through a filter.
I suspect the pleated nature of the filter means that the static pressure drop isn't all that much. Haven't got a manometer to measure it though.
- rainbowzootsuit 3y agoThanks for the feedback. Thinking about it some more, a general purpose 1" HVAC filters are rated at about .12 in. water column at 300 feet per minute. If you're running them a lot slower by having 4x-6x area, then I could see that your tests would bear out. I often reference this manufacturer when designing a duct system and selecting filter sizes. This is for their MERV10 filter. MERV8 is lower initial pressure. They have a velocity vs pressure chart on page 4. At 50 FPM it's down to about 0.03 in. w.c. https://www.glasfloss.com/product/zl-hv/ https://www.glasfloss.com/product/zl-hv/ I think a centrifugal could still be an advantage for noise while having a reasonable dimension, but your feedback is sincerely appreciated.
- londons_explore 3y agoI kinda wish all filtering was done with a greatly increased surface area. A 10x increase in surface area would mean far far less powerful fans are needed, and the filters could last a decade before needing to be replaced.
- rainbowzootsuit 3y agoIn a ducted system the ductwork and air terminals reach an economic happy medium that does not really balance with trying to make the filter pressure loss the driving factor.