4 ms·

Most full-frame sensors are still stitched from two exposures side-by-side (digital MF is four exposures, real medium format sensors six), but they're matched w

Most full-frame sensors are still stitched from two exposures side-by-side (digital MF is four exposures, real medium format sensors six), but they're matched well-enough (or the raw files are already compensating for this) that it's only an issue for the astro people nowadays.

shrx 3y ago
Interesting, I'm an amateur astronomer and didn't know that, I've never noticed any stitching artifacts when shooting with my Canon 6D. Found a relevant discussion on DPreview[1] which suggests that not all cameras do this, it appears to be more noticeable on some Sony cameras at first glance of the thread. [1] https://www.dpreview.com/forums/thread/3949870 https://www.dpreview.com/forums/thread/3949870 edit: another discussion: https://www.dpreview.com/forums/thread/3949529 https://www.dpreview.com/forums/thread/3949529
- formerly_proven 3y ago
  There's a very long thread on cloudy nights about this (I can't find it right now though) and iirc there was quite a lot of sample variation in how strong the discontinuity is and how exactly it looks, non-uniformity in general seems to have a fair amount of sample-variation, though there are common patterns - like almost all sensors are fairly uniform for about 80% of the picture height and have a gradient towards the edges. Probably due to sawing, mounting or bonding stresses. There are other causes for similar artifacts, e.g. banding because of mismatch between ADCs, though most CCD-based DSCs only used 1-4 ADCs interleaved. I believe some of the larger CCD sensors used separate read-out channels for quadrants, which would look similar to a stitched sensor in addition to likely being stitched anyhow. Also some Toshiba CMOS sensors had issues with banding due to mismatches between the column group ADCs. Lastly modern sensors for mirrorless cameras have split pixels for auto-focus in every n-th row, which also causes banding because they respond differently.
buildbot 3y ago
Based on my experience with Sinar digital backs, which spit out a raw, bias, dark and flat frame all independently, I think most cameras include this calibration hardcoded into the raw, because otherwise it is extremely easy to see! I know Phase One backs have calibrations that compensate for this, column errors, and hot pixels in their IIQ raws by default.

shrx 3y ago

Interesting, I'm an amateur astronomer and didn't know that, I've never noticed any stitching artifacts when shooting with my Canon 6D. Found a relevant discussion on DPreview[1] which suggests that not all cameras do this, it appears to be more noticeable on some Sony cameras at first glance of the thread. [1] https://www.dpreview.com/forums/thread/3949870 https://www.dpreview.com/forums/thread/3949870 edit: another discussion: https://www.dpreview.com/forums/thread/3949529 https://www.dpreview.com/forums/thread/3949529

formerly_proven 3y ago
There's a very long thread on cloudy nights about this (I can't find it right now though) and iirc there was quite a lot of sample variation in how strong the discontinuity is and how exactly it looks, non-uniformity in general seems to have a fair amount of sample-variation, though there are common patterns - like almost all sensors are fairly uniform for about 80% of the picture height and have a gradient towards the edges. Probably due to sawing, mounting or bonding stresses. There are other causes for similar artifacts, e.g. banding because of mismatch between ADCs, though most CCD-based DSCs only used 1-4 ADCs interleaved. I believe some of the larger CCD sensors used separate read-out channels for quadrants, which would look similar to a stitched sensor in addition to likely being stitched anyhow. Also some Toshiba CMOS sensors had issues with banding due to mismatches between the column group ADCs. Lastly modern sensors for mirrorless cameras have split pixels for auto-focus in every n-th row, which also causes banding because they respond differently.

buildbot 3y ago

Based on my experience with Sinar digital backs, which spit out a raw, bias, dark and flat frame all independently, I think most cameras include this calibration hardcoded into the raw, because otherwise it is extremely easy to see! I know Phase One backs have calibrations that compensate for this, column errors, and hot pixels in their IIQ raws by default.