4 ms·
The eyes have it: Seeing ultraviolet, exploring color
- jakeonthemove 15y agoInteresting read, but I don't see why I'd care about my "blunderbuss" TN panel - it's good enough for work. Also, I think the color gamut picture is flawed - since I have a TN panel, I can't possibly see the IPS gamut, and yet there is a clear difference - how is that possible?
- wtallis 15y agoIf color correction isn't being done on the image, then the image you see has essentially had its color space compressed. When displayed on a wide-gamut display, the "TN" part of the image will match how the "wide-gamut IPS" part looks on your TN panel. (Ignoring dithering and the color inaccuracy of the TN panel.) If the image was being properly color-corrected, then all the parts of it would look pretty much the same, since all but one of them has the signal clipped when it gets displayed by your monitor, due to the colors being out of range. (This is, of course, assuming that your TN panel has roughly the gamut and color response curve that are being emulated by the image, and that your TN panel has been calibrated to display colors accurately within the achievable gamut.)
- jacobolus 15y agoThe original source about seeing ultraviolet is interesting: http://www.komar.org/faq/colorado-cataract-surgery-crystalens/ultra-violet-color-glow/ http://www.komar.org/faq/colorado-cataract-surgery-crystalen... Worth noting is that the eye filters shorter wavelengths partly to protect the cone cells. Most animals (like various insects) that see further into the ultraviolet have much shorter lifespans than humans, and so damage doesn’t have as much impact. The rest of the article is just somewhat muddled rehashes of Wikipedia articles (which makes me realize once again that some of these color vision articles need dramatic improvement to avoid confusing people). For instance, this guy’s changed ultraviolet sensitivity doesn’t give us any insight into how tetrachromats see; he is still a trichromat, just with a slightly different short-cone-cell wavelength response. To understand color vision, I’d recommend Bruce MacEvoy’s site, http://www.handprint.com/LS/CVS/color.html http://www.handprint.com/LS/CVS/color.html
- alanfalcon 15y ago"As an example, try visualizing a color made from red and green (not the mixture of the two pigments, which would be brown, but a hypothetical color 'reen' made from elements of each)." Um, yellow is the combination of red and green. Am I missing something? EDIT: I just feel the author does a poor job of wording his thought experiment. When I visualize a mixture of red and green I visualize either brown or yellow, and since he said he didn't mean brown that leaves yellow.
- windsurfer 15y agoThere are different ways to mix color: http://en.wikipedia.org/wiki/Subtractive_color http://en.wikipedia.org/wiki/Subtractive_color http://en.wikipedia.org/wiki/Additive_color http://en.wikipedia.org/wiki/Additive_color Light is additive, so that's yellow. He's talking about pigments and paints, which are subtractive.
- deleted 15y ago[deleted]
- secoif 15y agoYes. You're thinking additive colour mixing, while the author is taking subtractive colour mixing. http://en.m.wikipedia.org/wiki/Additive_color http://en.m.wikipedia.org/wiki/Additive_color http://en.m.wikipedia.org/wiki/Subtractive_color http://en.m.wikipedia.org/wiki/Subtractive_color
- count 15y agoSo, this is a question I've not been able to find an answer for that's relevant: Where are the non-visible light sensitive CCD-style cameras? Why can't I take a 'picture' of the 2.4Ghz bouncing around my condo? Or the 1900Mhz rolling through walls and buildings? Things that are 'rf blocking' should show up brightly, while things that are 'rf transparent' should be ...well, transparent, like glass. I feel like I'm misunderstanding a fundamental difference between 'light' and 'rf' here, so please point it out if I am.
- wtallis 15y agoThose frequencies you are asking about correspond to wavelengths of several inches. That would require a very large and thick camera, and probably a different sensor technology to be sensitive to the less energetic photons. Near-infrared and UV are easy, though.
- count 15y agoTIL that visible light is in the 400-800THz range. Things make way more sense now, I never realized it was that crazy high, relatively. Now I'm on a quest to build a RF pixel camera - thanks for the idea!
- sp332 15y agoHere's one way to "see" the actual wifi signal strength in an area. https://vimeo.com/20412632 https://vimeo.com/20412632
- dhughes 15y agoIt would be cool if he could see X-rays in the 10 nm range from what I have read UV and X-rays seem to overlap in that area at 10 nm. But the link to his page shows he can see 340 to 350 nm at best.
- evincarofautumn 15y agoAccording to what research I’ve read, tetrachromacy has been demonstrated in a handful of females with a family history of colourblindness. However, there’s nothing precluding an XXY male from being a tetrachromat. Indeed, 1 in 1000 males are XXY and most are asymptomatic, and I have good colour discrimination, so I’ve always wondered if I might be a tetrachromat. Too bad there’s no way to test it on your standard-issue RGB LCD…