4 ms·

> mesh networks halve your bandwidth Oh. I actually didn't know this. Damn. > power-over-ethernet I used to use PoE and was getting great speeds everywhere i

> mesh networks halve your bandwidth Oh. I actually didn't know this. Damn. > power-over-ethernet I used to use PoE and was getting great speeds everywhere in the house, but then I got solar panels and an inverter. Turns out, that a lot of people ended up having the same issues as me on whirlpool.net.au :( But yeah, I've also considered getting an electrician in and wiring some rooms with CAT-6 and go wireless AP in that room. But sounds like it's still going to be the same as mesh doing this and halving my speed? Awesome! Thank you for the links. I'll check them out!

kmlx 3y ago
> But yeah, I've also considered getting an electrician in and wiring some rooms with CAT-6 and go wireless AP in that room. But sounds like it's still going to be the same as mesh doing this and halving my speed? as long as there is an ethernet cable from your switch/router to the AP, then speed will not halve. speed halves only when using mesh. > Awesome! Thank you for the links. I'll check them out! no problem. i started out my career in networking, and have always kept a soft spot for it even thou i'm doing software these days. the minimum you need is: - 1x Dream Machine (Pro or SE doesn't matter) - 1x Access Point (could be long range, could be lite, depends on your needs) you plug in the internet and the AP into the Dream Machine and that's about it. from this barebones setup you can add further hardware depending your needs. for example I've added a PoE switch and another smaller non-poe switch (that funnily enough is powered by the other PoE switch).
- alfiedotwtf 3y ago
  aha! Sweet, thanks... ok, looks like this is the way to go! Edit: to be honest, I'm actually excited to try this out now. I've been on bad wireless for at least 4 years
  - sethd 3y ago
    You might look at some of the replies in this thread. The poster you’re replying to has an outdated view of how mesh networks work with modern hardware. Mesh networks can use Ethernet as backhaul and they can also use dedicated radios on 6GHz for backhaul. I’m using a mix of both (still have a couple I need to run Ethernet to) and it’s fantastic.
    - mcny 3y ago
      > Mesh networks can use Ethernet as backhaul and they can also use dedicated radios on 6GHz band for backhaul. I’m using a mix of both (still have a couple I need to run Ethernet to) and it’s fantastic. I wouldn’t recommend wireless backhaul to people who have bad experience with WiFi. Some people have bad WiFi because their (older?) buildings have problems with wireless in general: I am not saying they live in a faraday cage but still their if their WiFi isn’t great, wireless backhaul won’t be either. Go wired if you have a choice.
      - manuelabeledo 3y ago
        This has a lot to do with the construction layout and materials used. Thus, in older houses, WiFi signal may not be great, and brick walls will make wiring the house an absolute pain. I have seen some people dropping wire outside of the house, which is not great either (surges can and will happen).
      - sethd 3y ago
        > Go wired if you have a choice. For sure, that's why I mentioned that I'm still in the process of switching over to pure ethernet for backhaul. That said, if you have enough nodes, 6GHz for backhaul works pretty nice right now. My home has concrete block exterior walls with some interior concrete and plaster walls and the nodes that use dedicated 6GHz for backhaul are doing just fine as is. I would never consider 5GHz for backhaul, though.
m-p-3 3y ago
FYI Power-over-Ethernet (PoE) and Powerline adapters are two entirely different things.
- alfiedotwtf 3y ago
  lol, sorry I got mixed up. Yeah, I meant to say that EoP seems to drop out and lose bandwidth on my lines. For devices rated at 300Mbps, I'm getting about 19Mbps
ajford 3y ago
If you happen to have existing coax cable runs in your house, you might look into MOCA. It's used by some modern cable tv boxes and similar devices to route ethernet packets over the existing coax cable. It can be used on the same coax as is used for your cable modem, though if you can isolate the coax you want to use as an ethernet link, you might have better results. I've used the competing standard DECA in the past, as it was significantly cheaper than MOCA about 5-8yrs ago ($25/unit vs $150/unit) but MOCA is now the much better option with it supporting GB speeds and pricing being down around ~$50/unit. I think the max speeds I saw over DECA was about 100Mbps, maybe 200Mbps on shorter runs.

kmlx 3y ago

> But yeah, I've also considered getting an electrician in and wiring some rooms with CAT-6 and go wireless AP in that room. But sounds like it's still going to be the same as mesh doing this and halving my speed? as long as there is an ethernet cable from your switch/router to the AP, then speed will not halve. speed halves only when using mesh. > Awesome! Thank you for the links. I'll check them out! no problem. i started out my career in networking, and have always kept a soft spot for it even thou i'm doing software these days. the minimum you need is: - 1x Dream Machine (Pro or SE doesn't matter) - 1x Access Point (could be long range, could be lite, depends on your needs) you plug in the internet and the AP into the Dream Machine and that's about it. from this barebones setup you can add further hardware depending your needs. for example I've added a PoE switch and another smaller non-poe switch (that funnily enough is powered by the other PoE switch).

alfiedotwtf 3y ago
aha! Sweet, thanks... ok, looks like this is the way to go! Edit: to be honest, I'm actually excited to try this out now. I've been on bad wireless for at least 4 years
- sethd 3y ago
  You might look at some of the replies in this thread. The poster you’re replying to has an outdated view of how mesh networks work with modern hardware. Mesh networks can use Ethernet as backhaul and they can also use dedicated radios on 6GHz for backhaul. I’m using a mix of both (still have a couple I need to run Ethernet to) and it’s fantastic.
  - mcny 3y ago
    > Mesh networks can use Ethernet as backhaul and they can also use dedicated radios on 6GHz band for backhaul. I’m using a mix of both (still have a couple I need to run Ethernet to) and it’s fantastic. I wouldn’t recommend wireless backhaul to people who have bad experience with WiFi. Some people have bad WiFi because their (older?) buildings have problems with wireless in general: I am not saying they live in a faraday cage but still their if their WiFi isn’t great, wireless backhaul won’t be either. Go wired if you have a choice.
    - manuelabeledo 3y ago
      This has a lot to do with the construction layout and materials used. Thus, in older houses, WiFi signal may not be great, and brick walls will make wiring the house an absolute pain. I have seen some people dropping wire outside of the house, which is not great either (surges can and will happen).
    - sethd 3y ago
      > Go wired if you have a choice. For sure, that's why I mentioned that I'm still in the process of switching over to pure ethernet for backhaul. That said, if you have enough nodes, 6GHz for backhaul works pretty nice right now. My home has concrete block exterior walls with some interior concrete and plaster walls and the nodes that use dedicated 6GHz for backhaul are doing just fine as is. I would never consider 5GHz for backhaul, though.

m-p-3 3y ago

FYI Power-over-Ethernet (PoE) and Powerline adapters are two entirely different things.

alfiedotwtf 3y ago
lol, sorry I got mixed up. Yeah, I meant to say that EoP seems to drop out and lose bandwidth on my lines. For devices rated at 300Mbps, I'm getting about 19Mbps

ajford 3y ago

If you happen to have existing coax cable runs in your house, you might look into MOCA. It's used by some modern cable tv boxes and similar devices to route ethernet packets over the existing coax cable. It can be used on the same coax as is used for your cable modem, though if you can isolate the coax you want to use as an ethernet link, you might have better results. I've used the competing standard DECA in the past, as it was significantly cheaper than MOCA about 5-8yrs ago ($25/unit vs $150/unit) but MOCA is now the much better option with it supporting GB speeds and pricing being down around ~$50/unit. I think the max speeds I saw over DECA was about 100Mbps, maybe 200Mbps on shorter runs.