3 ms·
300 watt sockets? So now I need a high power DC power supply with a fan in every outlet? Someone is not thinking this through all the way. Even at 90% efficien
by ars 15y ago
300 watt sockets? So now I need a high power DC power supply with a fan in every outlet?
Someone is not thinking this through all the way. Even at 90% efficiency you are wasting 33 watts of energy at max, and that is a LOT of heat to generate behind a wall with no ventilation.
Not to mention the power supply is not going to fit in a standard box. Or that good (read: Efficient) DC power supplies are quite expensive.
And you won't be making central power supplies in the basement either. 300 watts at 12 volts is 25 amps! You would need pretty thick cables to do that. At 5 volts it's 60 amps - that would be a wire as thick as what an electrical dryer uses.
He can have as many dreamy smiles as he wants, but this is not going to happen.
- mrsebastian 15y agoWhat if we chose a voltage that could be transmitted throughout the house without too many issues -- like 48V? Then we could step that down in the sockets, to 12 and 5V. We could also use USB cables that have transformers built in, I guess -- bulges in the cable, or something. But then you're moving away from the 'one cable for everything' idea.
- bhousel 15y agoI like this idea.. I've actually been thinking about something like this for a while. You could have a DC distribution panel next to the main one, that converts the mains voltage to 24/48 VDC for lighting circuits and DC receptacles. 240 Watts (10 or 5 Amps) could be enough to power a lot of devices on a branch, while still allowing the wires to be reasonable (14 AWG or smaller). I think the bigger win would be for LED lighting circuits, but device chargers could use it too.
- ars 15y agoWhy? I can't see any gain to converting to 48 volts if you just have to convert it again anyway. There isn't much difference between converting from 120 vs 48.