5 ms·
Ask HN: What's a good book to learn electronics?
I want to start doing things like building a rep-rap, making an RFID cloner, maybe even some robotics. What's a good book to teach me the basics of electronics, e.g., why do circuits need resistors, when do I use a capacitor, etc?
- PStamatiou 18y agoI don't know whats happened recently but I grew up with Forest M Mim's books. They were written on engineers/graph paper and handwritten but overall very informative. I bought them at RadioShack back in the day, but you can probably find them online for very cheap. http://en.wikipedia.org/wiki/Forrest_Mims http://en.wikipedia.org/wiki/Forrest_Mims
- PStamatiou 18y agoAlso, I was big into Parallax, Inc's BASIC Stamps, and a magazine called "Nuts and Volts".. not sure if it's still around. There was also a great, great electronics store near me called Electronics Parts Outlet (Houston) that had ridiculous electronics stuff. I suggest searching to see if there are any niche electronics stores in your area. I ended up learning from the wise old EEs that worked there and they let me thinker with peltiers, oscilliscopes and the like. I ended up doing a _ton_ of soldering kits. I think companies were by the name of Ramsey electronics and Velleman to name a few.
- lpgauth 18y agohttp://news.ycombinator.com/item?id=317376 http://news.ycombinator.com/item?id=317376 http://news.ycombinator.com/item?id=111798 http://news.ycombinator.com/item?id=111798 http://news.ycombinator.com/item?id=149317 http://news.ycombinator.com/item?id=149317 http://searchyc.com/ask+electronic http://searchyc.com/ask+electronic
- sigstoat 18y agoWhen you're ready for a bit of theory, the Art of Electronics is good stuff, with broad coverage.
- Anon84 18y agoFor me, electronics only started to make sense after this book: http://www.amazon.com/Art-Electronics-Paul-Horowitz/dp/0521370957 http://www.amazon.com/Art-Electronics-Paul-Horowitz/dp/05213...
- agarren 18y agoI've wondered about this myself and have found that the most common responses usually reference, "The Art of Electonics". Great book, sure, and very heavy on theory. There are a few books out now that touch on the Arduino platform - the Make/O'Reilly site has a few. Additionally, there are a couple of folks using a Sanguino/Arduino for building a rep rap, so it might be a good start. I've found "Electronics - Self Teaching Guide" by Harry Kybett to be a decent introduction to electronics in general. I also picked up "Embedded C Programming and the Atmel AVR" which is regularly recommended for the AVR platform.
- markessien 18y agoDon't bother. If you use the arduino board, you can approach electronics the same way as one would programming - by trial and error. Learn the basics - resistors, clock signals, how chips work, and the rest you can pick up by experimentation.
- Rod 18y agoWhile I do agree that electronics is learned by experimentation, IMHO the Arduino board is a bad starting point. I think that the best way to learn electronics is to start with the very basics (resistors, capacitors, coils, voltage dividers, simple RC and RL circuits, etc), then learn something about op-amps, then move on to nonlinear devices such as diodes and transistors. No math is needed, and simple circuits are easy to build. Building an analog amplifier is not hard, and it's quite rewarding to design and build something that actually works. If one is really devoted to the art of electronics, building a tube amplifier is even more rewarding ;-) After the basics of analog electronics, one can move to digital circuits, learn about interfacing, what the difference between RTL and TTL is, etc, etc. Playing with logic gates on a breadboard is fun and instructive. The basics of DAC's and ADC's are fundamental too. Finally, one is ready to move to microprocessors and stuff like the Arduino. Knowing the basics, one can actually build cool stuff with microprocessors, simple actuators and sensors. One knows how to build and connect sensors to microcontrollers, one knows what's happening in the ADC, one understands what makes it all work. I believe that starting with the Arduino board right away is like choosing Visual Basic as a first programming language: it hides the interesting details, and it prevents one from seeing the big picture. Just a personal opinion, of course.
- bprater 18y agoTotally disagree but respect your position. Trying to learn the analog side of electronics can take a very long time and requires vast amounts of information. If you go the digital route, most (software) hackers can be creating fairly elaborate systems in an afternoon. They do the bulk of the work in the software, rather than futzing with resistors and capacitors. Imagine the difference between creating a LED array to mimic the KITT car's LED light scanner in analog and in digital. Analog would be a nightmare, digital would be a great afternoon of fun on very limited hardware. Yes, eventually the person will run into the limitations of not understanding the analog well enough, but since they weren't bogged down in details, they may be excited enough to keep with the hobby.
- comatose_kid 18y agothe art of electronics is cool, but the ARRL handbook is even better.
- pt 18y agoi usually suggest folks get a kit - arduino, or an open source hardware kit from http://www.adafruit.com http://www.adafruit.com -- they're all fully documented and you'll learn by doing and move along harder projects as you become more proficient. (phil from MAKE magazine, also a good resource)
- ra 18y agoArt of Electronics is a very good book, but if you want to learn from a fun / programming point of view I highly recommend "Making Things Talk", by Tom Igoe. http://oreilly.com/catalog/9780596510510/ http://oreilly.com/catalog/9780596510510/
- dkd 18y agoI'll 2nd on Art of electronics.. But knowing the basics before touching it would be better
- codehd7 18y agoIt might be worthwhile to note that third edition of the book is in the works (supposedly). Given that the current (2nd) edition was published almost 20 years ago, I'm waiting to get the 3rd one. This page claims it's scheduled to be published in February 2009: http://isbn.nu/0521809266 http://isbn.nu/0521809266
- 3flp 18y agoElectronics is pretty broad. There are books for each area, depending on what you want to do: - Building kits? - Building circuits someone else designed? - Designing printed circuit boards? - Designing digital circuits? - Designing analog circuits? - Designing power electronics? - Designing RF and microwave electronics? - System design and assembly? It's a great hobby. You can spend decades learning all this, and more. I have.. And don't get just one book. Get a few different ones. Google for stuff. Search Isohunt for ebooks. Get application notes from component manufacturers. There are tons of free useful info in those.
- kaens 18y agohttp://www.ibiblio.org/kuphaldt/electricCircuits/ http://www.ibiblio.org/kuphaldt/electricCircuits/ in combination with http://www.ibiblio.org/kuphaldt/socratic/ http://www.ibiblio.org/kuphaldt/socratic/
- bprater 18y agoAnalog electronics and digital electronics are different beasts. Most of what you'll do when hacking together projects will be digital. If you are a programmer, and especially if you are a low-level programmer, you won't have a problem getting your feet wet on the digital side. Snag one of the kits folks are mentioning in this thread and get busy.
- trapper 18y agoDoing > Reading if you are that way inclined. I learned by buying an arduino starter pack + a couple of shields from ladyada, putting them together.
- aaronsw 18y agoFor the hardcore Feynman fans, there's the Feynman Lectures on Computation: http://books.theinfo.org/go/0738202967 http://books.theinfo.org/go/0738202967
- pkeane 18y agoThe Boys' First Book of Radio and Electronics. Author: Morgan, Alfred Powell, Publisher: New York, Scribner Date: [1954] The Boys' Second Book of Radio and Electronics. Author: Morgan, Alfred Powell, Publisher: New York, Scribner Date: [1957] The Boy's Third Book of Radio and Electronics. Author: Morgan, Alfred Powell, Publisher: New York, Scribner Date: [1962] The Boys' Fourth Book of Radio and Electronics; an introduction to solid state physics, semiconductors, and transistors, Author: Morgan, Alfred Powell. Publisher: New York, Scribner Date: [1969] For me, nothing else comes close :-)
- jsyedidia 18y agoI would recommend considering being more ambitious and learning how to design and prototype digital circuits on an FPGA development board. Pong Chu's book "FPGA Prototyping by VHDL Examples--Xilinx Spartan-3 Version" is really excellent, with lots of well-explained projects. You can get really nice Xilinx starter kits compatible with this book for cheap. To be absolutely compatible, you can get the old Spartan-3 starter board from digilentinc.com for $99, but be aware that you need a PC with a parallel port. If you prefer like me to connect your FPGA board to your computer using USB, I recommend either the Nexys-2 board for $99 or the Spartan-3E starter board for $149, available at digilentinc.com, or the more up-to-date Spartan-3A starter board for $189, which you can buy at nuhorizons.com or avnet.com. These boards are mostly compatible with the book, and you can get lots of peripheral modules like seven-segment LED's for them from Digilent. The software necessary to program these starter boards is available for free from Xilinx. The only slight problem is that you need to use Windows or Linux--no Mac OS X.
- blackguardx 18y agoAnyone wanting to know about electronics shouldn't start with FPGAs. I do FPGA design for a living. I wouldn't really consider it "electronics." It is closer to embedded programming than circuit design. To an outsider, they are almost exactly the same. Many companies lump FPGA design with firmware. With FPGA design, you start with a board with an FPGA on it and then write some code in Verilog (Verilog is much easier to learn than VHDL). Once the design is complete, you hit the synthesize and place and route buttons and download the reulting file into the FPGA. With embedded programming, you start with a board with a microcontroller on it and then write some code in assembly (you could also use C or something else). Once the design is complete, you hit the compile button and download the resulting file into the microcontroller.
- jsyedidia 18y agoYes, FPGA design is more like programming than it is like analog electronic circuit design. No need for soldering, or for thinking about analog equations. I think a lot of the audience of Hacker News would find it an interesting way to learn more about hardware, even though it doesn't answer the original poster's question about electronics a la resistors and capacitors. If one prefers Verilog, Pong Chu also has an edition of his book using that language. VHDL is more verbose than Verilog, and more strict about typing, which many consider to be a good thing for hardware designs. But at the level of Chu's books, they're almost equivalent--he uses a bunch of re-usable code templates which are easily translated between Verilog and VHDL. It's not worth agonizing about the difference; I chose VHDL mostly because more reference designs for the Xilinx starter kits are written in VHDL.
- comatose_kid 18y agoOne other piece of advice: Get access to an oscilloscope - they can be expensive, so you may want to enroll in a course at a community college.