4 ms·
It would be interesting to run the numbers on power use here. I think you can draw a maximum of 100W via a USB-C port? (Though most laptops would really strug
by eru 4y ago
It would be interesting to run the numbers on power use here.
I think you can draw a maximum of 100W via a USB-C port? (Though most laptops would really struggle with that, even when plugged in.)
How much heat does a cup of tea lose per second at eg 20C room temperature and 60C water temperature? (Or whatever you want to keep your beverage at?)
- sp332 4y agohttps://physics.stackexchange.com/questions/5265/cooling-a-cup-of-coffee-with-help-of-a-spoon/5510#5510 https://physics.stackexchange.com/questions/5265/cooling-a-c... To counteract a 2-centigrade-degree drop per minute, you'd only need 35W to keep 250ml at a constant 85C. (Or 65C if that's where you start it.)
- tinix 4y agoso you could insulate the coffee so it doesn't drop in temperature, induction heating a vacuum flask maybe?
- MayeulC 4y agoI bet adding a lid substantially decreases the power requirements. Nit: please use Celsius (and "°C" if you can)
- sp332 4y agoI prefer centigrade over Celsius because it's not named after a person. Also I wanted to be clear that it's a two degree drop, not 2°C.
- eru 4y agoIf you want to be funky with your units, I suggest measuring 'coldness' instead of temperature and expressing it in bit per joule (or more conveniently Gibibyte per nanojoule). See https://en.wikipedia.org/wiki/Thermodynamic_beta https://en.wikipedia.org/wiki/Thermodynamic_beta > Though completely equivalent in conceptual content to temperature, β is generally considered a more fundamental quantity than temperature owing to the phenomenon of negative temperature, in which β is continuous as it crosses zero whereas T has a singularity.[6] > In addition, β has the advantage of being easier to understand causally: If a small amount of heat is added to a system, β is the increase in entropy divided by the increase in heat. Temperature is difficult to interpret in the same sense, as it is not possible to "Add entropy" to a system except indirectly, by modifying other quantities such as temperature, volume, or number of particles.
- klempner 4y agoThe relevant number here is 15W. In principle USB C goes up to 240W now, but that isn't relevant here. USB-C power is negotiated, with a full blown two way negotiation if you want more than 5 volts (or to draw more than 3 amps). Framework laptop ports don't support outputting more than 5V or 3A and so will max out at 15W. That is, this isn't a "struggle" -- because USB-C has negotiated power in general, just because it is possible to build USB-C ports that support 240W doesn't mean that a random port on a battery powered laptop has to support anything close to that.
- koromak 4y agoCan you explain what "negotiated power" means? Never heard of it, maybe the hardware on the receiving end needs to have built-in circuits which signal to the generating device that it can handle a certain voltage?
- zmgsabst 4y agoThat’s correct. The port powers up in the default low power mode, but the attached device can signal that it supports more if the device can provide it. You want to start off with low power — since starting off with high power could damage devices that don’t support it.
- deleted 4y ago[deleted]
- zamnos 4y agoYes exactly. You plug in the cables and then there's the following conversation: Laptop: *Om nom nom, 5 volts, yum!* Power supply: Hey, I can do 5 V, 9 V, 15 V and 20 V Laptop: I hear ya. Laptop: Can I get 20 Volts? Power supply: I hear ya. Power supply: Here's 20 volts! You get the idea. All the way up to whatever the device will accept. Past that, the device rejects the offer from the power supply. The original spec lists 5 V, 9 V, 15 V and 20 V, with support of for volts being kinda common because that's what cars use so the circuitry support already exists. According to spec, the charger is supposed to support all the voltages lower than it's max, but ofc not everything is spec compliant. 20 Volt @ 5 Amp is 100 watts which was the old maximum power usb-c PD could do. But it turns out that wasn't enough, so they renamed that to be Standard Power Range (SPR) and released when Extended Power Range (EPR). EPR adds adds 28 V, 36 V and 48 V @ 5 Amps, to the spec, for a new maximum of 240 Watts of power. (Longer desc of the conversation in table 5 in https://www.ti.com/lit/an/slva842/slva842.pdf https://www.ti.com/lit/an/slva842/slva842.pdf )