6 ms·

A physical, open source time puncher for freelancers

42 points by ericskiff 15y ago

Raphael Abrams shows us his Freelance “Puncher” time tracking device. After trying many different methods for keeping track of his hours, Raph created this little puncher to easily clock in and out of his freelance work. Check out the code and schematics here: https://github.com/raphaelabrams/freelance-puncher

Gianteye 15y ago
I was just jonesing for just such a device. I'm in the same bind and would love to play with a similar design but with a dial to log different jobs. Excellent job.
codezero 15y ago
This gives me a simpler idea -- use a USB drive and run a script that detects it, writes timestamp to it as it is plugged in -- say intermittently every 10 minutes. The log can either be written to the USB drive or to a local file.
- mgkimsal 15y ago
  no more autorun.inf detection processes are there? :(
- jasonkostempski 15y ago
  I had the same idea when I opened the article but then I thought about wearing out the USB port, maybe that's a goofy concern.
  - nknight 15y ago
    Officially, the required lifetime for a USB type A connector is a disturbingly-low 1500 insertion cycles. I expect present-day connectors to greatly outlast this in practice, of course.
    - jasonkostempski 15y ago
      The Wikipedia article I found, probably the same one you found, only specifies male connector cycles "The lifetime of a USB-A male connector is approximately 1,500 connect/disconnect cycles." I was more concerned about the receptacle, which I can't seem to find info on. I wouldn't care to lose a thumb drive so much, but a port would be horrible.
      - nknight 15y ago
        Regretfully, "connector" is used generically in the USB standard to refer to both the plug and receptacle. Type-A "standard durability" connectors, plug and receptacle, are specced for 1,500 cycles minimum. 5,000 for "high durability". The only type specced for more is the Micro connector, at 10,000 cycles. See section "5.7.1.3 Durability or Insertion/Extraction Cycles (EIA 364-09)" of the USB 3.0 standard. I'm sure it's in 2.0, too, but the section number may be different. http://www.usb.org/developers/docs/ http://www.usb.org/developers/docs/
  - jasonkostempski 15y ago
    Bonus idea, could it be made to also start up RescueTime or similar software?
- Palomides 15y ago
  heh, my even simpler idea: use the capslock key (replacing the normal function, presumably); not used for anything else, standard on every computer, almost always has a visual indicator, probably very easy to script around.
  - ericskiff 15y ago
    Ooh, that's a great twist! If you're working on the computer, that's an excellent hack.
tzs 15y ago
Back in the days when my employer did a lot of billable work for clients, I used music to track my time. I'd decide which client's project I wanted to work on, pop in a CD, and when the CD ended I'd write down the total time, take a little break to stretch or get a drink or visit the bathroom, and then pick the next thing I wanted to work on and the next CD I wanted to listen to. This gave me convenient time tracking and reminded me to get up and take breaks.
- lukifer 15y ago
  This is a great idea.
jasonkostempski 15y ago
I have a feeling this could cause some trouble in places like airports.
deleted 15y ago
[deleted]
sopooneo 15y ago
A stop watch?
ale55andro 15y ago
Reminds me of the pomodoro technique whereby a real physical kitchen timer is recommended to keep track of time broken down in 25minute intervals.
- andersh 15y ago
  It also reminded me of various devices related to recording/illustrating the passage of time.
chx 15y ago
My brain is not a stopwatch http://drupal4hu.com/node/319 http://drupal4hu.com/node/319
- squidnuts 15y ago
  I used to do per project fees exclusively but I found that with certain jobs, mainly ones that involve a lot of drawn out unpredictable grind (like repairing broken circuit boards), hourly is much better for me. Different situations call for different solutions. I still charge per project for jobs that don't lend themselves to being measured with clocks. Oh, and just FYI: not all freelancers are programmers! In fact, some people do work that doesn't involve computers at all. True story.
  - chx 15y ago
    And my post was not exactly geared to programmers either. Aside from the half sentence which says "when I am actually typing the solution into an editor" there is nothing programmer specific.

42 points by ericskiff 15y ago

Gianteye 15y ago

I was just jonesing for just such a device. I'm in the same bind and would love to play with a similar design but with a dial to log different jobs. Excellent job.

codezero 15y ago

This gives me a simpler idea -- use a USB drive and run a script that detects it, writes timestamp to it as it is plugged in -- say intermittently every 10 minutes. The log can either be written to the USB drive or to a local file.

mgkimsal 15y ago
no more autorun.inf detection processes are there? :(
jasonkostempski 15y ago
I had the same idea when I opened the article but then I thought about wearing out the USB port, maybe that's a goofy concern.
- nknight 15y ago
  Officially, the required lifetime for a USB type A connector is a disturbingly-low 1500 insertion cycles. I expect present-day connectors to greatly outlast this in practice, of course.
  - jasonkostempski 15y ago
    The Wikipedia article I found, probably the same one you found, only specifies male connector cycles "The lifetime of a USB-A male connector is approximately 1,500 connect/disconnect cycles." I was more concerned about the receptacle, which I can't seem to find info on. I wouldn't care to lose a thumb drive so much, but a port would be horrible.
    - nknight 15y ago
      Regretfully, "connector" is used generically in the USB standard to refer to both the plug and receptacle. Type-A "standard durability" connectors, plug and receptacle, are specced for 1,500 cycles minimum. 5,000 for "high durability". The only type specced for more is the Micro connector, at 10,000 cycles. See section "5.7.1.3 Durability or Insertion/Extraction Cycles (EIA 364-09)" of the USB 3.0 standard. I'm sure it's in 2.0, too, but the section number may be different. http://www.usb.org/developers/docs/ http://www.usb.org/developers/docs/
- jasonkostempski 15y ago
  Bonus idea, could it be made to also start up RescueTime or similar software?
Palomides 15y ago
heh, my even simpler idea: use the capslock key (replacing the normal function, presumably); not used for anything else, standard on every computer, almost always has a visual indicator, probably very easy to script around.
- ericskiff 15y ago
  Ooh, that's a great twist! If you're working on the computer, that's an excellent hack.

tzs 15y ago

Back in the days when my employer did a lot of billable work for clients, I used music to track my time. I'd decide which client's project I wanted to work on, pop in a CD, and when the CD ended I'd write down the total time, take a little break to stretch or get a drink or visit the bathroom, and then pick the next thing I wanted to work on and the next CD I wanted to listen to. This gave me convenient time tracking and reminded me to get up and take breaks.

lukifer 15y ago
This is a great idea.

jasonkostempski 15y ago

I have a feeling this could cause some trouble in places like airports.

deleted 15y ago

[deleted]

sopooneo 15y ago

A stop watch?

ale55andro 15y ago

Reminds me of the pomodoro technique whereby a real physical kitchen timer is recommended to keep track of time broken down in 25minute intervals.

andersh 15y ago
It also reminded me of various devices related to recording/illustrating the passage of time.

chx 15y ago

My brain is not a stopwatch http://drupal4hu.com/node/319 http://drupal4hu.com/node/319

squidnuts 15y ago
I used to do per project fees exclusively but I found that with certain jobs, mainly ones that involve a lot of drawn out unpredictable grind (like repairing broken circuit boards), hourly is much better for me. Different situations call for different solutions. I still charge per project for jobs that don't lend themselves to being measured with clocks. Oh, and just FYI: not all freelancers are programmers! In fact, some people do work that doesn't involve computers at all. True story.
- chx 15y ago
  And my post was not exactly geared to programmers either. Aside from the half sentence which says "when I am actually typing the solution into an editor" there is nothing programmer specific.