10 ms·

Your First LTE

222 points by teleforce 4y ago

Reason077 4y ago
This all sounds very cool, but don’t you need licensed spectrum to operate your own LTE/NR network? Is there an open/unlicensed band available for this sort of thing, or do hobbyists just “get away with it” by keeping their antennas small and power levels low?
- jetsnoc 4y ago
  In the United States regulated by the FCC CBRS Tier 3 is available to "general authorized users." You can operate a private lte-network so long as you authorize and follow the spectrum rules. From the FCC Website > The GAA tier is licensed-by-rule to permit open, flexible access to the band for the widest possible group of potential users. GAA users can operate throughout the 3550-3700 MHz band. GAA users must not cause harmful interference to Incumbent Access users or Priority Access Licensees and must accept interference from these users. GAA users also have no expectation of interference protection from other GAA users. Technical rules for GAA users can be found in Subpart E of Part 96.
  - myself248 4y ago
    Have you figured out how to get a SAS connection as a GAA user? I can't even find a price list.
  - hakfoo 4y ago
    Sort of a tangent-- I always wondered what was meant when you see FCC disclaimers (i. e. the Part 15 disclaimers on anything electric) that says "must accept interference." That seems weird to specify-- interference seems like an environmental hazard to be expected, like saying a light bulb must "accept" a brownout. Does it mean "it won't be damaged by the expected level of RFI" or is there some sort of "active rejection of interference" they're explicitly forbidding?
    - jgerhardt 4y ago
      The requirement to "accept interference" is legal rather than technical. It means that if the device experiences issues with interference you can't use the normally available method of filing an FCC complaint to get the source of the interfrence shut down.
- seanbrodie 4y ago
  The US have unlicensed spectrum available for "Citizens Broadband Radio Service" (CBRS) which can support 5G and LTE.
  - Ballu 4y ago
    Its not unlicensed, you have to apply & get the usage rights from FCC. If some one using at that location, you cant use. Plus, FCC has right to revoke temp or permanently the usage right. If I am not wrong, you have to pay minimal fee. To implement this architecture, you have to connect your private 4G/5G network with SAS service providers. https://cbrs.wirelessinnovation.org/sas-administrators https://cbrs.wirelessinnovation.org/sas-administrators https://www.celona.io/cbrs/cbrs-sas https://www.celona.io/cbrs/cbrs-sas
    - seanbrodie 4y ago
      Thanks for clarification. I'm not in the US so am not familiar with the specifics.
    - kotaKat 4y ago
      Indoor CBSDs don't need a SAS. You are fully legal running a B48 eNB inside your home at low power without even touching the FCC. I'm doing this with Open5GS and a Baicells Nova227 that's running at low power indoors as it's both an indoor and outdoor-capable unit.
      - FrankPetrilli 4y ago
        I thought I was the only one silly enough to do something like this! I've got a Nova 227 tucked away in a corner room of my home facing inwards connected to Magma (was Open5GS). Did you run into the bug where the default Open5GS bearer rate limit (1Gbps) somehow triggers a bug in the Nova 227 and causes it to run super slow (~7Mbps down/100kbps up)? I found that setting its rate limit to anything else seems to solve the problem and I get 100Mbps/10Mbps with TDD2/SSF7.
        4y ago
- stasmo 4y ago
  You can see the licensing fees here for Canada. https://ised-isde.canada.ca/site/spectrum-management-telecommunications/en/spectrum-and-telecommunications-fees https://ised-isde.canada.ca/site/spectrum-management-telecom... Looks like you’re charged about CAD.04 per MHz per population of the licensed area. Didn’t dive too deep but it might be viable for a small town to put something together, if they’re unhappy with the big providers.
  - londons_explore 4y ago
    > CAD.04 per MHz per population of the licensed area. That sounds like a pretty reasonable way to sell spectrum... I hope this is some time-limited lease and the spectrum eventually goes back to the central government. I hope that police/fire/military uses have to go through the same process and pay for their spectrum out of their budgets too. Too many other countries just give massive chunks of spectrum to the fire service who will then use it for walkie talkies for 3 fire trucks, when the same amount of spectrum could be used to give broadband, phone and TV to millions of people.
  - notatoad 4y ago
    huh, i didn't realize spectrum was so cheap. that actually makes something like this really viable for use in unpopulated areas.
- namibj 4y ago
  At chaos communications Congress we usually get a little spectrum for the local network. But it's not treated as critical as the local DECT network. I for one wish there'd be software support for the LTE feature that allows a PHY-level broadcast to be received by phones, because we could offer very low latency audio streaming of all the audio tracks (usually German/English presenter, the other via a live-dub, and sometimes french or so as a live dub), so that people could sit in the talk and get their audio via headphones. The DECT network provided that offering previously, but the conference modules (it was a conference call where you defaulted to being muted) had to go for more base station (controller? For remote radio heads or so, because you'd not want to run RF antenna cables from the box to all the locations...) modules. Also there were doubts as to the PHY being broadcast/multicast or it being unicast, as the latter would be a problem for the large lecture halls due to issues with dividing them into a grid of Femto cells (DECT seems to be badly suited to that approach, but I don't know why exactly). My idea of a solution would be a wifi distributed-mimo/synchronous base station that feels like one (or a handful) of BSSIDs per frequency (like, a particular 40 or 80 MHz channel in the 5GHz region), but doesn't make clients even aware of roaming happening: ideally it could do full MIMO between the clients transmitting (they listen before they start talking, and don't talk when they could hear someone else saying something (even if they can't make out any words); this could easily be multiple clients with many dozen base stations spread around) and all base station antennas that can get a decent signal strength (trying to make out each transmission even if any individual antenna heard a combination of the transmission, akin to normal wifi MIMO). Then in the other direction utilizing beamforming to not confuse clients with more overlapping signals than their receive antennas can pick apart (and isolate the signal(s) intended for that client from everything else) (like, talking to clients that are sufficiently far apart so the base can make all other client's signals weak enough to not be a problem for the one client). Because it can pre-compensate for the base transmissions from the nearby antennas overlapping at the clients, it can simultaneously use overlapping antenna "cells". And PHY-broadcast (also useful for multicasting) can transmit on all at once simultaneously by being sufficiently synchronous (same mechanism as the echo/reflection/multi-path mitigation of OFDM).
  - avidiax 4y ago
    Bluetooth LE is developing a broadcast solution like this. Eventually, commodity headphones will be able to subscribe to such broadcasts. Time to short the companies that make lecture hall assisted audio devices and museum audio guides.
TedDoesntTalk 4y ago
Why do home users do this? Does it create a private network between the mobile devices that connect to it?
- stasmo 4y ago
  Home users don’t really do this but you might see this kind of private LTE network at an air port.
- jetsnoc 4y ago
  In Rural areas some people need longer range wifi. IoT devices in different buildings or data service for things on a farm. If the costs were lower, I deploy something in my neighborhood. For whatever reason, my neighborhood has terrible LTE service. I don't know the exact reasons why but I suspect I have poor service either due to geography like we're using another counties cell tower on a butte 5 miles away due to line of sight issues or maybe there are metallic properties of the land here on our canyon rim (mostly lava flows.) As my spouse and I bike, take walks or drive to work I would love to have data service in that few mile radius around my house. If my phone could have an eSIM with my provider but a SIM with my own private LTE and a meeting call can fail over between data services, I would have a lot more flexibility. I would have a lot of other use-cases with IoT and maybe quadrupeds as things like that become more generally available but data within a few mile radius would be the first thing. I suppose I could get four 90 degree antennas at a higher db power output and blast my neighborhood with wifi but that has a lot of downsides.
  - Reventlov 4y ago
    If that's for IoT, just use LoRa on license-free bands, and that's it, you're done with km of range if that's some rural areas.
    - jetsnoc 4y ago
      That works fine if the use-case allows for high-latency and doesn't need TCP. To your point, I would imagine most all home use-cases are fine in this regard.
samtho 4y ago
I’m a little disappointed that the parts list went like this: - Core i5 computer ($100-$250) - Smart Card reader/writer ($18 for the HID one they used) - optional 10mhz GPS receiver ($10-$20) - sysmoUSIM-SJS1 (writable SIM card, $1-$3 each) - USRP B200/B210 ($1200-$1900!) Yikes, looking like that’s not happening this weekend. I work as an SA for a large IoT company and I don’t even think I can justify this expense.
- seanbrodie 4y ago
  You can still run all the software and use virtual eNodeB and UE to simulate the radio comms.
  - femto 4y ago
    Look up using the ZeroMQ channel model with srsRAN: chapter 12 of the user manual. https://buildmedia.readthedocs.org/media/pdf/srslte-docs/latest/srslte-docs.pdf https://buildmedia.readthedocs.org/media/pdf/srslte-docs/lat...
- voxadam 4y ago
  > - USRP B200/B210 ($1200-$1900!) If you think that's bad just wait until you hear what an FCC band license costs.
  - samtho 4y ago
    Having worked with many people who have used bands for a short time they were not authorized to and never ended up on the FCC shitlist, I would be okay with a very low power, temporary setup to play with/test something in the GAA band because it’s kind of a free-for-all among those who have a license to this spectrum anyway and being low power means you won’t be interfering with much, if anything. The FCC tends to go after transmitters who are actually disrupting communication and if your signal drops off to the point where ambient noise on the band is louder outside the permitter of your house, you’re not going to get that knock on your door.
- zikduruqe 4y ago
teeray 4y ago
This is interesting, for sure, but the steps here are the easy part. The challenge is doing this legally, since I’m pretty sure srsRAN is going to use bands you almost certainly don’t have a license for. The only viable options for the hobbyist is a network using unlicensed bands (like 2.4 GHz / 5GHz, or the 33cm ISM band) along with CBRS[0]. As I understand it, most UEs (handsets) that support one of those bands will not use it exclusively—only in tandem with another licensed band. The other alternative is Amateur Radio bands, which some hams have apparently experimented with: https://github.com/mmtorni/HamLTE https://github.com/mmtorni/HamLTE. [0] https://en.wikipedia.org/wiki/Citizens_Broadband_Radio_Service https://en.wikipedia.org/wiki/Citizens_Broadband_Radio_Servi...
- anilakar 4y ago
  Sadly srsRAN does not seem to implement TDMA. Ham radio operators have a slice at 2.3 GHz which overlaps Band 40, supported by a good number of phones.
  - 310260 4y ago
    There are other stacks that implement TDD-LTE. Could be possible with OpenAirInterface though I'm not sure if it's ever been successfully tried.
  - namibj 4y ago
    Also band 40 is the only widely supported TDMA in range of the cheaper SDRs. Even a limesdr mini can speak that, though one may want to get an LTE quartz to keep phase noise in spec (the fraction from the normal quartz has a really big denominator, that makes fractional PLL problematic if you don't sense fractional phase of the reference quartz) with the PLLs on those SDRs.
- stefan_ 4y ago
  Unlicensed bands typically have the requirement that you implement some kind of backoff or collision detection mechanism to ensure fairness between users of the band and guarantee you are not sending more than X% of the time. I don't think LTE is prepared to do that at all.
rustdeveloper 4y ago
Does it give access to the internet? Could it be used with this setup: https://scrapingfish.com/blog/byo-mobile-proxy-for-web-scraping https://scrapingfish.com/blog/byo-mobile-proxy-for-web-scrap... ?
- londons_explore 4y ago
  > Does it give access to the internet? Yes, but via the IP address of whatever machine you're running it on. > Could it be used with this setup: https://scrapingfish.com/blog/byo-mobile-proxy-for-web-scrap https://scrapingfish.com/blog/byo-mobile-proxy-for-web-scrap... ? Not usefully - that tool requires access to an IP address pool of a mobile network, which this project wouldn't give you.
boramalper 4y ago
Also see Fabrice Bellard's LTE/NR Base Station Software https://bellard.org/lte/ https://bellard.org/lte/ > LTEENB allows to build a real 4G LTE/5G NR base station (called an eNodeB (4G) or gNodeB (5G)) using a standard PC and a low cost software radio frontend. All the physical layer and protocol layer processing is done in real time inside the PC, so no dedicated hardware is necessary. NB-IoT and Cat-M1 devices are also supported. The software is now developped and distributed by Amarisoft.
- wsc981 4y ago
  Just wondering, could this in theory be used to connect a phone to a personal 4G network without needing some subscription or prepaid service?
born-jre 4y ago
Could set up like this use e-sim ?
- keyme 4y ago
  Not with a production phone, where the euicc (esim chip) only has the production 3gpp certificates installed.
  - 310260 4y ago
    Do you have any good sources of reading for the eSIM standard with regards to this? Projects like Ukama make it look easy to issue your own eSIMs but I don't understand whether it's something they provide as a service to their users through a central authority or if it's actually a proper roll-your-own system.
femto 4y ago
In theory you can use a ($540) bladeRF in place of the ($2100) B200/210. It's got the same family 2x2 MIMO tx/rx chip in it as the B210. I say in theory, as I've been trying to get srsRAN to work with it, so far without success. It gets a response, but fails to establish the link. Has anyone managed to get srsRAN working with a bladeRF? Others have mentioned Fabrice Bellard's LTE code, but (AFIAK) it's not freely available. Don't take this as a criticism. Bellard has done some great Free software and it shouldn't be expected that he will release everything as Free software.
- bryancoxwell 4y ago
  Without knowing anything else about your setup my first guess would be synchronization issues. Do you have a GPSDO or some other means of providing a reference signal to your BladeRF?
  - femto 4y ago
    Thanks for the idea. I'll give it a go. srsRAN includes carrier frequency offset estimation and compensation, but it can't hurt to assume it's got a problem there.
    - namibj 4y ago
      1) the LTE base clock has a giant denominator when using a LimeSDR with it's on-board crystal. A crystal for the LTE base clock is single-digit cost and fixes this (you can even set it up as a VCO to use as a fractional PLL off of some more-stable reference (10MHz GPSDO should be easiest, but it could also directly GPSDO the LTE crystal for mildly better performance at a big effort expense)), as the stability is to keep multiple eNodeB's OFDM symbols (and more importantly, TDMA slots) aligned so they can collaborate for broadcasts and get by with using the same spectrum on overlapping cells. 2) I'd worry much more about near end cross talk without a specially tuned diplexer that splits TX/RX of FDD LTE channels. Try a TDD band your hardware supports to try.
- karteum 4y ago
  > Others have mentioned Fabrice Bellard's LTE code, but (AFIAK) it's not freely available. Don't take this as a criticism. Bellard has done some great Free software and it shouldn't be expected that he will release everything as Free software. Also, I think that if Fabrice would release it as open-source, the pros/cons balance would be different compared to other projects (ffmpeg, qemu...) because * very few people would be able to use and benefit this, considering that 1°/ you need proper (expensive) hardware, 2°/ anyway you cannot use licensed bands, 3°/ actually you can (mostly) also not use unlicensed bands without proper support from phones and without implementing the required band-sharing mechanisms from the regulation (e.g. listen-before-talk), and anyway LAA requires to use a licensed band as an anchor for signaling... * it would have cancelled a source of revenue (today through Amarisoft)
herpderperator 4y ago
So I'm curious... The name LTE means Long Term Evolution. What exactly are/were we evolving from and over what term? It just seems weird to have 3G, LTE, and then 5G. What happened to the LTE wording/name/meaning?
- femto 4y ago
  In reality, they are all derived from the same 3GPP standard [1], the generations (3G, LTE, 4G, 5G, ...) just being labels applied to particular releases of the underlying standard. In git terms, the underlying 3GPP standard is the "master" branch and the releases are tags. Happily it is all freely available. To answer your question, LTE referred to the intermediate stages between 3G and 4G. The labels are a bit arbitrary and interpretation of exactly what the label refers to varies with what the carrier is trying to sell. [1] https://www.3gpp.org/ https://www.3gpp.org/
- numpad0 4y ago
  It was an upgrade to 3G UMTS, the long-term evolution for the third generation as a stopgap to delaying 4G development. The industry then gave up on the 4G proper and rebadged 3G/3.5G/3.9G LTE upgrade into LTE/4G LTE, and moved leftover elements onto 5G and 6G. It’s kind of repeating with 5G NSA(Non-Standalone)/5G SA(Standalone)/5G mmWave branding, it seems the marketing parts of telecommunication industry always wants to rebadge backported technology as the mainstream next generation, and engineering divisions wants to move onto one generation ahead.
gattacamovie 4y ago
LimeSdr based solution should be much cheaper than USRP. Either full board, or usb based sticks (v1 or upcoming v2: https://www.crowdsupply.com/lime-micro/limesdr-mini-2/updates/creating-a-private-lte-network-with-srsran https://www.crowdsupply.com/lime-micro/limesdr-mini-2/update... )
- h2odragon 4y ago
  LimeSDR didn't make nearly the splash it should have; why? I recall hearing the first iterations of the hardware were skittish and noisy; did they never improve?
Jhsto 4y ago
This is good software, I used their stack to provision software "onto the cell tower" using Kubernetes (spectrum licenses required to be used on a phone): https://arxiv.org/pdf/1905.03883.pdf https://arxiv.org/pdf/1905.03883.pdf - maybe this helps someone to understand the stack!
0xdeadbeefbabe 4y ago
One more license comment and HN will forfeit its license to lean left.

222 points by teleforce 4y ago

This all sounds very cool, but don’t you need licensed spectrum to operate your own LTE/NR network? Is there an open/unlicensed band available for this sort of thing, or do hobbyists just “get away with it” by keeping their antennas small and power levels low?

jetsnoc 4y ago
In the United States regulated by the FCC CBRS Tier 3 is available to "general authorized users." You can operate a private lte-network so long as you authorize and follow the spectrum rules. From the FCC Website > The GAA tier is licensed-by-rule to permit open, flexible access to the band for the widest possible group of potential users. GAA users can operate throughout the 3550-3700 MHz band. GAA users must not cause harmful interference to Incumbent Access users or Priority Access Licensees and must accept interference from these users. GAA users also have no expectation of interference protection from other GAA users. Technical rules for GAA users can be found in Subpart E of Part 96.
- myself248 4y ago
  Have you figured out how to get a SAS connection as a GAA user? I can't even find a price list.
- hakfoo 4y ago
  Sort of a tangent-- I always wondered what was meant when you see FCC disclaimers (i. e. the Part 15 disclaimers on anything electric) that says "must accept interference." That seems weird to specify-- interference seems like an environmental hazard to be expected, like saying a light bulb must "accept" a brownout. Does it mean "it won't be damaged by the expected level of RFI" or is there some sort of "active rejection of interference" they're explicitly forbidding?
  - jgerhardt 4y ago
    The requirement to "accept interference" is legal rather than technical. It means that if the device experiences issues with interference you can't use the normally available method of filing an FCC complaint to get the source of the interfrence shut down.
seanbrodie 4y ago
The US have unlicensed spectrum available for "Citizens Broadband Radio Service" (CBRS) which can support 5G and LTE.
- Ballu 4y ago
  Its not unlicensed, you have to apply & get the usage rights from FCC. If some one using at that location, you cant use. Plus, FCC has right to revoke temp or permanently the usage right. If I am not wrong, you have to pay minimal fee. To implement this architecture, you have to connect your private 4G/5G network with SAS service providers. https://cbrs.wirelessinnovation.org/sas-administrators https://cbrs.wirelessinnovation.org/sas-administrators https://www.celona.io/cbrs/cbrs-sas https://www.celona.io/cbrs/cbrs-sas
  - seanbrodie 4y ago
    Thanks for clarification. I'm not in the US so am not familiar with the specifics.
  - kotaKat 4y ago
    Indoor CBSDs don't need a SAS. You are fully legal running a B48 eNB inside your home at low power without even touching the FCC. I'm doing this with Open5GS and a Baicells Nova227 that's running at low power indoors as it's both an indoor and outdoor-capable unit.
    - FrankPetrilli 4y ago
      I thought I was the only one silly enough to do something like this! I've got a Nova 227 tucked away in a corner room of my home facing inwards connected to Magma (was Open5GS). Did you run into the bug where the default Open5GS bearer rate limit (1Gbps) somehow triggers a bug in the Nova 227 and causes it to run super slow (~7Mbps down/100kbps up)? I found that setting its rate limit to anything else seems to solve the problem and I get 100Mbps/10Mbps with TDD2/SSF7.
      - 4y ago
stasmo 4y ago
You can see the licensing fees here for Canada. https://ised-isde.canada.ca/site/spectrum-management-telecommunications/en/spectrum-and-telecommunications-fees https://ised-isde.canada.ca/site/spectrum-management-telecom... Looks like you’re charged about CAD.04 per MHz per population of the licensed area. Didn’t dive too deep but it might be viable for a small town to put something together, if they’re unhappy with the big providers.
- londons_explore 4y ago
  > CAD.04 per MHz per population of the licensed area. That sounds like a pretty reasonable way to sell spectrum... I hope this is some time-limited lease and the spectrum eventually goes back to the central government. I hope that police/fire/military uses have to go through the same process and pay for their spectrum out of their budgets too. Too many other countries just give massive chunks of spectrum to the fire service who will then use it for walkie talkies for 3 fire trucks, when the same amount of spectrum could be used to give broadband, phone and TV to millions of people.
- notatoad 4y ago
  huh, i didn't realize spectrum was so cheap. that actually makes something like this really viable for use in unpopulated areas.
namibj 4y ago
At chaos communications Congress we usually get a little spectrum for the local network. But it's not treated as critical as the local DECT network. I for one wish there'd be software support for the LTE feature that allows a PHY-level broadcast to be received by phones, because we could offer very low latency audio streaming of all the audio tracks (usually German/English presenter, the other via a live-dub, and sometimes french or so as a live dub), so that people could sit in the talk and get their audio via headphones. The DECT network provided that offering previously, but the conference modules (it was a conference call where you defaulted to being muted) had to go for more base station (controller? For remote radio heads or so, because you'd not want to run RF antenna cables from the box to all the locations...) modules. Also there were doubts as to the PHY being broadcast/multicast or it being unicast, as the latter would be a problem for the large lecture halls due to issues with dividing them into a grid of Femto cells (DECT seems to be badly suited to that approach, but I don't know why exactly). My idea of a solution would be a wifi distributed-mimo/synchronous base station that feels like one (or a handful) of BSSIDs per frequency (like, a particular 40 or 80 MHz channel in the 5GHz region), but doesn't make clients even aware of roaming happening: ideally it could do full MIMO between the clients transmitting (they listen before they start talking, and don't talk when they could hear someone else saying something (even if they can't make out any words); this could easily be multiple clients with many dozen base stations spread around) and all base station antennas that can get a decent signal strength (trying to make out each transmission even if any individual antenna heard a combination of the transmission, akin to normal wifi MIMO). Then in the other direction utilizing beamforming to not confuse clients with more overlapping signals than their receive antennas can pick apart (and isolate the signal(s) intended for that client from everything else) (like, talking to clients that are sufficiently far apart so the base can make all other client's signals weak enough to not be a problem for the one client). Because it can pre-compensate for the base transmissions from the nearby antennas overlapping at the clients, it can simultaneously use overlapping antenna "cells". And PHY-broadcast (also useful for multicasting) can transmit on all at once simultaneously by being sufficiently synchronous (same mechanism as the echo/reflection/multi-path mitigation of OFDM).
- avidiax 4y ago
  Bluetooth LE is developing a broadcast solution like this. Eventually, commodity headphones will be able to subscribe to such broadcasts. Time to short the companies that make lecture hall assisted audio devices and museum audio guides.

TedDoesntTalk 4y ago

Why do home users do this? Does it create a private network between the mobile devices that connect to it?

stasmo 4y ago
Home users don’t really do this but you might see this kind of private LTE network at an air port.
jetsnoc 4y ago
In Rural areas some people need longer range wifi. IoT devices in different buildings or data service for things on a farm. If the costs were lower, I deploy something in my neighborhood. For whatever reason, my neighborhood has terrible LTE service. I don't know the exact reasons why but I suspect I have poor service either due to geography like we're using another counties cell tower on a butte 5 miles away due to line of sight issues or maybe there are metallic properties of the land here on our canyon rim (mostly lava flows.) As my spouse and I bike, take walks or drive to work I would love to have data service in that few mile radius around my house. If my phone could have an eSIM with my provider but a SIM with my own private LTE and a meeting call can fail over between data services, I would have a lot more flexibility. I would have a lot of other use-cases with IoT and maybe quadrupeds as things like that become more generally available but data within a few mile radius would be the first thing. I suppose I could get four 90 degree antennas at a higher db power output and blast my neighborhood with wifi but that has a lot of downsides.
- Reventlov 4y ago
  If that's for IoT, just use LoRa on license-free bands, and that's it, you're done with km of range if that's some rural areas.
  - jetsnoc 4y ago
    That works fine if the use-case allows for high-latency and doesn't need TCP. To your point, I would imagine most all home use-cases are fine in this regard.

samtho 4y ago

I’m a little disappointed that the parts list went like this: - Core i5 computer ($100-$250) - Smart Card reader/writer ($18 for the HID one they used) - optional 10mhz GPS receiver ($10-$20) - sysmoUSIM-SJS1 (writable SIM card, $1-$3 each) - USRP B200/B210 ($1200-$1900!) Yikes, looking like that’s not happening this weekend. I work as an SA for a large IoT company and I don’t even think I can justify this expense.

seanbrodie 4y ago
You can still run all the software and use virtual eNodeB and UE to simulate the radio comms.
- femto 4y ago
  Look up using the ZeroMQ channel model with srsRAN: chapter 12 of the user manual. https://buildmedia.readthedocs.org/media/pdf/srslte-docs/latest/srslte-docs.pdf https://buildmedia.readthedocs.org/media/pdf/srslte-docs/lat...
voxadam 4y ago
> - USRP B200/B210 ($1200-$1900!) If you think that's bad just wait until you hear what an FCC band license costs.
- samtho 4y ago
  Having worked with many people who have used bands for a short time they were not authorized to and never ended up on the FCC shitlist, I would be okay with a very low power, temporary setup to play with/test something in the GAA band because it’s kind of a free-for-all among those who have a license to this spectrum anyway and being low power means you won’t be interfering with much, if anything. The FCC tends to go after transmitters who are actually disrupting communication and if your signal drops off to the point where ambient noise on the band is louder outside the permitter of your house, you’re not going to get that knock on your door.
zikduruqe 4y ago

teeray 4y ago

This is interesting, for sure, but the steps here are the easy part. The challenge is doing this legally, since I’m pretty sure srsRAN is going to use bands you almost certainly don’t have a license for. The only viable options for the hobbyist is a network using unlicensed bands (like 2.4 GHz / 5GHz, or the 33cm ISM band) along with CBRS[0]. As I understand it, most UEs (handsets) that support one of those bands will not use it exclusively—only in tandem with another licensed band. The other alternative is Amateur Radio bands, which some hams have apparently experimented with: https://github.com/mmtorni/HamLTE https://github.com/mmtorni/HamLTE. [0] https://en.wikipedia.org/wiki/Citizens_Broadband_Radio_Service https://en.wikipedia.org/wiki/Citizens_Broadband_Radio_Servi...

anilakar 4y ago
Sadly srsRAN does not seem to implement TDMA. Ham radio operators have a slice at 2.3 GHz which overlaps Band 40, supported by a good number of phones.
- 310260 4y ago
  There are other stacks that implement TDD-LTE. Could be possible with OpenAirInterface though I'm not sure if it's ever been successfully tried.
- namibj 4y ago
  Also band 40 is the only widely supported TDMA in range of the cheaper SDRs. Even a limesdr mini can speak that, though one may want to get an LTE quartz to keep phase noise in spec (the fraction from the normal quartz has a really big denominator, that makes fractional PLL problematic if you don't sense fractional phase of the reference quartz) with the PLLs on those SDRs.
stefan_ 4y ago
Unlicensed bands typically have the requirement that you implement some kind of backoff or collision detection mechanism to ensure fairness between users of the band and guarantee you are not sending more than X% of the time. I don't think LTE is prepared to do that at all.

rustdeveloper 4y ago

Does it give access to the internet? Could it be used with this setup: https://scrapingfish.com/blog/byo-mobile-proxy-for-web-scraping https://scrapingfish.com/blog/byo-mobile-proxy-for-web-scrap... ?

londons_explore 4y ago
> Does it give access to the internet? Yes, but via the IP address of whatever machine you're running it on. > Could it be used with this setup: https://scrapingfish.com/blog/byo-mobile-proxy-for-web-scrap https://scrapingfish.com/blog/byo-mobile-proxy-for-web-scrap... ? Not usefully - that tool requires access to an IP address pool of a mobile network, which this project wouldn't give you.

boramalper 4y ago

Also see Fabrice Bellard's LTE/NR Base Station Software https://bellard.org/lte/ https://bellard.org/lte/ > LTEENB allows to build a real 4G LTE/5G NR base station (called an eNodeB (4G) or gNodeB (5G)) using a standard PC and a low cost software radio frontend. All the physical layer and protocol layer processing is done in real time inside the PC, so no dedicated hardware is necessary. NB-IoT and Cat-M1 devices are also supported. The software is now developped and distributed by Amarisoft.

wsc981 4y ago
Just wondering, could this in theory be used to connect a phone to a personal 4G network without needing some subscription or prepaid service?

born-jre 4y ago

Could set up like this use e-sim ?

keyme 4y ago
Not with a production phone, where the euicc (esim chip) only has the production 3gpp certificates installed.
- 310260 4y ago
  Do you have any good sources of reading for the eSIM standard with regards to this? Projects like Ukama make it look easy to issue your own eSIMs but I don't understand whether it's something they provide as a service to their users through a central authority or if it's actually a proper roll-your-own system.

femto 4y ago

In theory you can use a ($540) bladeRF in place of the ($2100) B200/210. It's got the same family 2x2 MIMO tx/rx chip in it as the B210. I say in theory, as I've been trying to get srsRAN to work with it, so far without success. It gets a response, but fails to establish the link. Has anyone managed to get srsRAN working with a bladeRF? Others have mentioned Fabrice Bellard's LTE code, but (AFIAK) it's not freely available. Don't take this as a criticism. Bellard has done some great Free software and it shouldn't be expected that he will release everything as Free software.

bryancoxwell 4y ago
Without knowing anything else about your setup my first guess would be synchronization issues. Do you have a GPSDO or some other means of providing a reference signal to your BladeRF?
- femto 4y ago
  Thanks for the idea. I'll give it a go. srsRAN includes carrier frequency offset estimation and compensation, but it can't hurt to assume it's got a problem there.
  - namibj 4y ago
    1) the LTE base clock has a giant denominator when using a LimeSDR with it's on-board crystal. A crystal for the LTE base clock is single-digit cost and fixes this (you can even set it up as a VCO to use as a fractional PLL off of some more-stable reference (10MHz GPSDO should be easiest, but it could also directly GPSDO the LTE crystal for mildly better performance at a big effort expense)), as the stability is to keep multiple eNodeB's OFDM symbols (and more importantly, TDMA slots) aligned so they can collaborate for broadcasts and get by with using the same spectrum on overlapping cells. 2) I'd worry much more about near end cross talk without a specially tuned diplexer that splits TX/RX of FDD LTE channels. Try a TDD band your hardware supports to try.
karteum 4y ago
> Others have mentioned Fabrice Bellard's LTE code, but (AFIAK) it's not freely available. Don't take this as a criticism. Bellard has done some great Free software and it shouldn't be expected that he will release everything as Free software. Also, I think that if Fabrice would release it as open-source, the pros/cons balance would be different compared to other projects (ffmpeg, qemu...) because * very few people would be able to use and benefit this, considering that 1°/ you need proper (expensive) hardware, 2°/ anyway you cannot use licensed bands, 3°/ actually you can (mostly) also not use unlicensed bands without proper support from phones and without implementing the required band-sharing mechanisms from the regulation (e.g. listen-before-talk), and anyway LAA requires to use a licensed band as an anchor for signaling... * it would have cancelled a source of revenue (today through Amarisoft)

herpderperator 4y ago

So I'm curious... The name LTE means Long Term Evolution. What exactly are/were we evolving from and over what term? It just seems weird to have 3G, LTE, and then 5G. What happened to the LTE wording/name/meaning?

femto 4y ago
In reality, they are all derived from the same 3GPP standard [1], the generations (3G, LTE, 4G, 5G, ...) just being labels applied to particular releases of the underlying standard. In git terms, the underlying 3GPP standard is the "master" branch and the releases are tags. Happily it is all freely available. To answer your question, LTE referred to the intermediate stages between 3G and 4G. The labels are a bit arbitrary and interpretation of exactly what the label refers to varies with what the carrier is trying to sell. [1] https://www.3gpp.org/ https://www.3gpp.org/
numpad0 4y ago
It was an upgrade to 3G UMTS, the long-term evolution for the third generation as a stopgap to delaying 4G development. The industry then gave up on the 4G proper and rebadged 3G/3.5G/3.9G LTE upgrade into LTE/4G LTE, and moved leftover elements onto 5G and 6G. It’s kind of repeating with 5G NSA(Non-Standalone)/5G SA(Standalone)/5G mmWave branding, it seems the marketing parts of telecommunication industry always wants to rebadge backported technology as the mainstream next generation, and engineering divisions wants to move onto one generation ahead.

gattacamovie 4y ago

LimeSdr based solution should be much cheaper than USRP. Either full board, or usb based sticks (v1 or upcoming v2: https://www.crowdsupply.com/lime-micro/limesdr-mini-2/updates/creating-a-private-lte-network-with-srsran https://www.crowdsupply.com/lime-micro/limesdr-mini-2/update... )

h2odragon 4y ago
LimeSDR didn't make nearly the splash it should have; why? I recall hearing the first iterations of the hardware were skittish and noisy; did they never improve?

Jhsto 4y ago

This is good software, I used their stack to provision software "onto the cell tower" using Kubernetes (spectrum licenses required to be used on a phone): https://arxiv.org/pdf/1905.03883.pdf https://arxiv.org/pdf/1905.03883.pdf - maybe this helps someone to understand the stack!

0xdeadbeefbabe 4y ago

One more license comment and HN will forfeit its license to lean left.