6 ms·
Philips sets €575M aside for respirator lawsuits
- jwestbury 4y agoAs a point of clarification, this is _not_ for respirators, but for CPAP devices. Incidentally, this has been awful for CPAP users: Pandemic supply chain issues resulted in short supply of CPAP devices, and combined with a huge spike in demand due to these faulty Philips units, many people were left with a choice to use CPAP devices which had the potential to expose them to carcinogenic foam, or to go without their CPAP, which obviously carries its own severe health risks.
- salad-tycoon 4y agoThis is true and just to clarify on your clarification patients have been unable to get a CPAP replacement for years. In some places they would be offered things like special pillows as a substitute. Special pillows are in no way a substitute for positive airway pressure/airway splinting. Or you could have a device that electrocutes your throat when it starts closing implanted into your neck.
- makomk 4y agoIt's for both as far as I understand it - Philips built a bunch of CPAP devices and ventilators which all had the same basic flaw.
- rasz 4y agoAny teardowns? Everyone fixing electronics/cars knows about foam crumbling to dust with age/external factors like heat.
- cjrp 4y ago> If the sound-dampening foam in the devices made contact with certain cleaning materials I wonder if "cleaning materials" means a chemical, like a spray, or something different.
- petejansson 4y agoA few years ago, there were a number of devices that came on the market that essentially blew ozone through the airflow pathways in PAP devices, and this was supposed to be a substitute for disassembly and scrubbing (which is a lot less convenient). While nobody has said these devices and the ozone methods actually damaged the foam, replacement PAP units all are not warranted if ozone cleaning devices are used. I don't know if this is the only "cleaning material" to which the article refers.
- AwaAwa 4y agoOzone or active oxygen from what I can gather
- jaclaz 4y agoVery likely some cleaners also have some solvent, though there is an explicit warning about UV and ozone[1] sanitizing: https://www.fda.gov/medical-devices/safety-communications/certain-philips-respironics-ventilators-bipap-and-cpap-machines-recalled-due-potential-health-risks https://www.fda.gov/medical-devices/safety-communications/ce... https://www.fda.gov/medical-devices/safety-communications/update-certain-philips-respironics-ventilators-bipap-machines-and-cpap-machines-recalled-due https://www.fda.gov/medical-devices/safety-communications/up... but I believe that more than anything else is the quality of this PE-PUR foam that is lacking. [1] ozone sanitizing treatments have been found to damage a lot of materials (besides metal which oxidizes very quickly also rubbers) and actually ozone chambers are used to test rubber materials durability
- kotaKat 4y agohttps://www.amazon.com/Filter-Infusion-Line-Filters-Blocking/dp/B09MFFMLVQ https://www.amazon.com/Filter-Infusion-Line-Filters-Blocking... The best thing is that third party manufacturers are making their own replacement parts for people to DIY repair their own machines and just have zero sound-deadening foam in them. I'm in the recall, I refuse to use the reworked unit they sent me because it's a goddamn used CPAP first and foremost in the age of COVID -- I reworked my own machine instead. It wasn't a bad replacement project, I took my time - the sellers even provide in some of the kits all the tools you need, full color booklets, and video guides on Youtube on how to crack them open and swap it out.
- kif 4y agoAs someone who will probably purchase a CPAP device soon, this is deeply troubling.
- salad-tycoon 4y agoI, random person on internet, highly recommend resmed airsense. Make sure it’s apap model. Their naming schemes are confusing. I’ve used Phillips and resmed and resmed is so much nicer in every way.
- ronyclau 4y agoResMed AirSense user here. Do take note that the water reservoir in the recent versions is prone to leakage after around a year of use, and replacing it is pretty expensive. I sealed mine with food-grade silicone as fellow users in the internet suggested, and it's been good since.
- NovemberWhiskey 4y ago>replacing it is pretty expensive. The water tank for the AirSense 11 is something like $29 and it's a consumable item that's covered by your insurance. I just get a new one every six months.
- mrguyorama 4y agoWhy is a water tank a consumable item?
- NovemberWhiskey 4y agoI don't know - I guess because you could get build-ups of minerals and other things inside them and it's probably better not to rely on people cleaning them given that they're medical devices that blow air into your lungs?
- camone 4y ago
- memcg 4y agoI signed up for a replacement in September 2021 and it was just delivered in April 2023.
- TrispusAttucks 4y agoDitto. It was a ridiculous wait. Thoughts on the replacement unit they sent? I don't like the new one. The pressure dynamics don't feel the same especially on exhale.
- deleted 4y ago[deleted]
- kotaKat 4y agoI'm mad I got one of the 'reconditioned' first-gen units as part of the recall on the DS1. I don't feel comfortable using a 'used' CPAP, even if it was "reconditioned". I'd love to know their logic as to why some people got brand new DS2s and others got used DS1s back. I'm still waiting regardless -- I have a Dreamstation Go that's perpetually stuck because they haven't come up with any remediation efforts. The best part about the Dreamstation Go users is that we're getting 'general' recall emails that imply we need to provide further info but then smack in the middle of it just tell Dreamstation Go users to just continue waiting because we're still screwed over. At this point I just want the $1300 or so I've spent on this damn thing back in cash so I can go buy a Transcend Micro and move on. I put both of these recalls in the day they went live in June 2021.
- quikoa 4y agoCan you take them to a small claims court to speed things up? Waiting for almost two years sounds ridiculous.
- Someone1234 4y agoIt is worse. For example, the old one had the hose attach at a top pivoting point, the new one is a fixed side point. Therefore, it is far easier to move the machine at night via tossing/turning (and maybe pull it off the table/damage it). The old one pushed the water holder out for quick DAILY replacements/cleaning. The whole mechanism was very overbuilt, and it didn't feel like it was going to fail in the machine's lifetime. The new water tank is bulkier to remove, and everything feels cheap (particularly the top-latch) and like it will fail soon. The screen is on top, which you cannot see while laying in bed. The touch screen is unresponsive and small (it is going to be rough for older people with arthritis and rough finger skim). As to travel/camping mobility: The 2 is superior if you want to take the humidifier tank (smaller overall), but with the old one if you left the humidifier at home it was tiny. PS - Both the old and new are annoying with light pollution at night.
- nisegami 4y agoWhat I'm hearing is that there are a lot of mostly functional CPAP devices on the used market now. Maybe I should look into getting one. And by getting one I mean sneaking one into my country illegally.
- mter 4y ago> What I'm hearing is that there are a lot of mostly functional CPAP devices on the used market now. Phillips is doing a replacement and you are supposed to send in your old device for disposal. Not sure what happens if you don't send it in, but they included a box and pre-paid label. No real reason to keep the old cpap since it's being recalled and the risk of being sent a bill from phillips for not returning the old one doesn't make trying to make some money on the side worth it. These things are hundreds of dollars.
- alberth 4y agoWhat's the news story here? Isn't it typical business practice to need to account for potential pending liabilities.
- ycombinete 4y agoParagraph 2 of the article: Philips had to recall millions of sleep apnea devices and ventilators due to potential health risks posed to users. If the sound-dampening foam in the devices made contact with certain cleaning materials, the foam could crumble, and users could breathe it in. “This quarter, Philips Respironics recorded a EUR 575 million provision in connection with the anticipated resolution of the economic loss class action, an important step in addressing the litigation related to the recall,” the company said.
- dtagames 4y agoAfter such a long and storied history in electronics, Philips should be embarrassed to let itself turn into just a healthcare company -- and one with these kind of quality problems. Philips doesn't make foam (or much of anything anymore). What do you bet this was caused by outsourcing cheap materials (foam + adhesives + whatever plastics are in there) that decompose when placed together. And, as just designer and brander of the device (you know they don't manufacture these, either), they didn't do much testing or chemical compatibility work? And this is a medical device.
- 6177c40f 4y agoTangentially- Why, in America, do we need a doctor's prescription to purchase a CPAP machine? Of course, I know plenty of bad reasons why, but I'm wondering if there are any legitimately good reasons at all? This reminds me of the situation with hearing aids, where the FDA recently reduced the barriers to purchasing them and this appears to have been a good move.
- sp332 4y agoThey’re pretty dangerous if used improperly. CO2 buildup can even be fatal.
- mynameisvlad 4y agoDoes the prescription come with magical CO2 scrubbers? All the prescription does is set some baseline parameters. Most CPAPs you can buy are APAPs anyway and modify the parameters on the fly.
- wnevets 4y ago> All the prescription does is set some baseline parameters. Most CPAPs you can buy are APAPs anyway and modify the parameters on the fly. And training on how to use it property is also provided. I would not be shocked if the number of people using tap water would sky rocket if there was zero barrier to having one.
- mynameisvlad 4y agoTraining is not actually required to be provided by anyone, manufacturer, government or otherwise. There’s plenty of online shops selling you the prescription which come with at best a short user guide that you can probably find online. They come with no aftercare, and you’re just given a device (usually unlocked) and the pressure recommendation preset. That’s it. The current state of CPAP prescriptions is total bullshit.
- 4y ago