4 ms·
Diagrams are just visible enough that I can tell that they're present but I cannot otherwise see them. I suppose that's because I'm using a dark theme on Firefo
by HankB99 4y ago
Diagrams are just visible enough that I can tell that they're present but I cannot otherwise see them. I suppose that's because I'm using a dark theme on Firefox.
Not that it matters. There's enough text to figure out what's going on in the first place and it would not help me much in any case.
I have a file server running of an ancient server motherboard from another age. (Supermicro X8SIL w/X3460 and 16GB ECC RAM) It uses just about 95W idle and bumps to about 150W when the drives (5 HDDs) are being scrubbed. I tried suspending the server and power dropped to about 75W - not a huge saving.
Another concern is drive longevity. Starting and stopping repeatedly during the day is a lot harder on them than running continuously and could lead to premature drive failure. I could explore this if my server were SSD based but it is not.
- cmeacham98 4y agoI'm not using any dark theme addons or similar, just the standard prefers-color-scheme, and I have the same problem. So they just didn't account for their website's dark mode when writing the article.
- themaninthedark 4y agoWindows dark theme here and I had the same problem. I clicked the light mode on the website and then back to dark mode and it was fixed. So their website is reading your theme and adjusting the background correctly but fails to adjust the test and diagrams.
- notRobot 4y agoHighlighting the diagram makes it readable.
- danieg 4y agoAuthor here, apologies for the dark mode issue and thanks for flagging it -- looks to be an open bug in theme-ui (https://github.com/system-ui/theme-ui/issues/1602 https://github.com/system-ui/theme-ui/issues/1602). I've just pushed a workaround that appears to have fixed it.
- V__ 4y agoI wrote it a bit further down, but another solution is to use SVG's with stroke='currentColor' instead. This value uses the inherited text-color and would therefore always work.
- michielderhaeg 4y agoIf I switch to the light theme and back again, the diagrams become white and readable.
- V__ 4y agoHe is inverting the embedded SVG's colors using CSS. However, that CSS is JavaScript applied and doesn't trigger on page load. SVG offers a nice 'currentColor' color value, which resolves to the inherited text-color. Replacing stroke='#000000' with stroke='currentColor' would solve this bug without requiring any JS.
- foepys 4y agoSometimes servers don't actually go into deep suspend modes because of proprietary management interfaces. Disabling those in the BIOS can result in huge savings.
- notRobot 4y agoHighlighting the diagram makes it readable.
- PragmaticPulp 4y ago> I tried suspending the server and power dropped to about 75W - not a huge saving. This doesn’t sound like it’s actually suspending. Or it may have left the drives spinning. Server gear usually isn’t optimized for actually sleeping. Workstation boards are much more likely to work.
- ornornor 4y agoThat sounds like a lot. I have a HP Z440 with a Xeon e5-2650v4 (24 cores) with 128GB RAM, 2x8TB spinning rust, 1x PCIe SSD, and another SATA SSD that’s idling at 70W. When it’s scrubbing the drives, it goes to around 100W. Running proxmox. The machine without most of the drives and 32GB RAM cost me about 250$ used.
- oceanplexian 4y agoIt's his CPU (X3460). They are quite ancient and were known for being power hungry (Nehalem). Even a move up to a $15 Broadwell chip would improve energy efficiency dramatically. The motherboard probably doesn't even support sleep states like S2/S3.