3 ms·
You really don't want to run HVDC through your house. Solar panels in a string configuration make 100's of Volts, and what they produce is changing depending on
by jacquesm 4y ago
You really don't want to run HVDC through your house. Solar panels in a string configuration make 100's of Volts, and what they produce is changing depending on the load and the amount of incident sunlight. So you would always have some kind of DC/DC conversion going and that's an inverter in all but name.
You really don't want 12V if you DC either, the currents will be ridiculously high and for what you have saved on an inverter you'll be spending it on cabling and fuses. Much, much better to just go with AC and wire it straight into the distribution panel, it will save you thousands compared to a DC system of comparable power and the DC system will never be as safe (because breaking a DC circuit that carries 100A or more is very hard to do in a non-hazardous way using gear available to ordinary mortals).
- ccorcos 4y agoI’m curious to hear more about the difficulty of breaking DC current. I was also thinking planning to research more into GFCI for DC current. Seems like it’s possible if you tie the negative terminal to ground just like with AC but that feels weird to me. I guess cars usually have the negative terminal tied to the chasis so it seems reasonable. Low voltage, high amperage is definitely going to cost a lot in cabling though, that’s for sure. My understanding is that the only reason AC is preferred to DC for transmission is because it’s easier to transform. But rectifying is super simple and cheap — I wonder what the primary drawbacks are of using DC in homes…
- jacquesm 4y agoAC goes through zero 50 or 60 times per second so that helps you to interrupt a running current. DC runs steadily, continuously so if you try to break a DC current it will arc like mad and with a bit of luck you'll end up losing your contacts the very first time you try to break the circuit under load. DC in homes is not used because lots of gear relies on the AC frequency to provide a rotating field (easy to achieve with a capacitor).