2 ms·
The thing in the picture won't work at all if you plug it into a USB 3.0 port so that problem solves itself. I believe Thunderbolt ports are required to provide
by jeffbee 4y ago
The thing in the picture won't work at all if you plug it into a USB 3.0 port so that problem solves itself. I believe Thunderbolt ports are required to provide a minimum of 15W. But overall you might be right, there is not an end-to-end negotiation that would avoid a worst-case brownout of you had a very power-hungry SSD. The SSD in the article has a high-power active mode of 7.5W max (I am not sure why it says 3.3v*3.3A on the sticker[1]) and the TB controller in the enclosure claims 1.2W, so in this case it seems fine.
It's possible to configure NVMe devices with power caps, but the 970 Evo in the article loses 95% of its performance if you cap it to 3.6W, which is its lowest operational power state.
1: Edited to say this is because mine is a 970 Evo Plus apparently the original really did draw that much current.
- megous 4y ago> It's possible to configure NVMe devices with power caps, but the 970 Evo in the article loses 95% of its performance if you cap it to 3.6W, which is its lowest operational power state. Heh, yeah I saw about 4 MiB/s max read speed with similar enclosure plugged into USB 3.0 port (I guess it self limited for a while). Meanwhile much less power hungry SATA SSD + USB-SATA bridge worked at 400 MiB/s there.
- jeffbee 4y agoI don't know why the Samsung is so bad at low power. A WD SN850X in the same machine has no noticeable change in random read performance with a low power state configured. It's half the speed of the Samsung at full power, but 10x as fast at low power.