4 ms·
Paint coatings can make a massive difference to temperatures in a home. People understand "black paint = hot", but that isn't even necessarily true, and ther
by londons_explore 4y ago
Paint coatings can make a massive difference to temperatures in a home. People understand "black paint = hot", but that isn't even necessarily true, and there is far more to it.
I believe building regulations should require specific performance from paint on new buildings, and that commercial painters be required to replace any paint on a 'same or better' basis.
Performance would be measured on the basis of watts of absorption under sunlight, and watts of emissions to the night sky. It is possible to design paint that visually is any color, yet maximizes or minimizes each of those parameters independently - therefore allowing you to choose a coating to minimize energy use for the building in whatever climate surrounds it.
I think if all buildings were painted with optimal paint tomorrow, we could probably shave more off the worlds energy consumption than all EV's have saved so far.
- detourdog 4y agoI wonder if it makes sense to work these formulas by region. When people discuss that roofs need to be white I would think that only applies when cooling dominates energy use. It seems where heating is dominate should have black roofs.
- KiranRao0 4y agoWhile I agree, often times the places that need the most heat are those with snow. So it may still be better to optimize for cooling in many cases.
- detourdog 4y agoMaybe but I can tell that is not my case. If I was to generalize my question beyond my circumstances it would. What coatings should be used for roof and exterior walls for a well insulated building in in the mid forties latitude. Snow has some insulating value so the heatloss is reduced. A highly absorbent roof might still be a plus. I'm currently trying to figure out the if I can put a thin layer of phase change material PCM on my exterior walls. The idea would be that the phase change would delay the reaction of the heat transmission through the walls. The building has a high thermal mass and it takes about 72 hours of a 15+ degree temperature difference to result in 4 degree temperature change of the interior of the building. Modern commercial buildings can't use open windows for ventilation. The ventilation has to be provided by a mechanical system. I'm trying to optimize the building to maintain a consistent overall temperature range of 72-78 degrees. The summer is not a problem the heat pumps and solar array mean I only get 5 electric bills a year. I think that I can do a lot of optimization of coatings and solar thermal to get to net zero.
- coryrc 4y agoSlightly warmer attic in winter doesn't reduce heat loss significantly, but in summer the roof temperature increase is much greater than winter, does measurably increase cooling load in insufficiently insulated houses, and, in aggregate, causes the Urban Heat Island Effect along with road surfaces.
- detourdog 4y agoCurrently most of the insulation I have installed in the attic is in the rafters of the ceiling. probably close to 18" of high density cellulose. The fire sprinkler system is dry. I could add another layer of insulation in the roof rafters or not. The building is from 1931 and I added the sprinkler and more insulation in the attic. My heating load is much greater than my cooling load. Most of the other points don't apply to my situation.
- coryrc 4y agohttps://www.greenbuildingadvisor.com/article/creating-a-conditioned-attic https://www.greenbuildingadvisor.com/article/creating-a-cond...
- schiffern 4y agoI think the person you replied to knows that, hence why they said >> choose a coating to minimize energy use for the building in whatever climate surrounds it
- detourdog 4y agoYes, their point of view seemed the most nuanced and that is why I asked them. I wasn't challenging them. I was hoping for more thoughts.
- hammyhavoc 4y agoTell us more.
- londons_explore 4y agoWhen you put a hot thing near a cold thing, they exchange heat and the temperatures even out. The heat moves via light - infrared light usually. Cooler things emit less light overall, and the light they do emit tends to have a longer wavelength (thats why the embers of a fire might glow red, but a hotter fire might be orange or yellow). For each color of light that something might emit or absorb, there is a 'shinyness' (technically known as reflectance spectra). A shiny surface reflects light, which means it will take longer to heat up, or longer to cool down. By making a material which is shiny in the redder (ie. longer) wavelengths, yet not shiny in the shorter wavelengths, you can make a material which heats up fast when put next to a very hot item (like the sun), but doesn't cool down fast when put next to a very cold object (like the night sky). That would make a great paint for a building in a cold climate! This would be a visually 'black' material to our eyes, although you could design it to be any human color if you trade some performance. Likewise, one can do the reverse. Reflective of short wavelengths, and non-reflective of long wavelengths. That will help it stay cool in the sun, and lose as much heat as possible at night to the sky. The ideal material for this would be visually white, but again, you can trade a little performance for any other color. It is also possible to have panels which physically flip to reveal another coating either between summer and winter, or between day and night to get even better results - although obviously with a complexity cost. Shutters in some european countries are an early version of this idea. Note - the above is a simple explanation. For the full explanation, see [1] [1]: https://en.wikipedia.org/wiki/Black-body_radiation https://en.wikipedia.org/wiki/Black-body_radiation
- Maursault 4y ago> Reflective of short wavelengths, and non-reflective of long wavelengths. That will help it stay cool Why wouldn't a surface that reflects heat stay cooler than something non-reflective that absorbs heat?
- 4y ago
- aaron695 4y ago> Performance would be measured on the basis of watts of absorption under sunlight, and watts of emissions to the night sky. It is possible to design paint that visually is any color, yet maximizes or minimizes each of those parameters independently This doesn't exist. Or is there a link to commercial paints that can do this? Or testing on real buildings not claims from a labs media department? Here's a link disproving thermal paints which are ugly as well as don't work - https://www.sciencedirect.com/science/article/abs/pii/S0378778819301781 https://www.sciencedirect.com/science/article/abs/pii/S03787... Given money most people could better insulate their homes so even if these could exist they are pointless unless they are also reasonably priced.
- Bjartr 4y agoYour link seems to be discussing paints that reduce conductive losses (paint with insulating additives) between the paint and the ambient air, whereas I believe the person you were responding to was describing paint that optimized radiant losses between paint and the visible sky and reduce reduce gains from the sun, which are independent of ambient air temperature. For example, there's a reason so many buildings in the Mediterranean are painted white going back to antiquity.