4 ms·
There's nothing wrong with continuous improvement but when you are trying to fine tune something in the flat portion of an exponential scale, and lets face it,
by ggm 4y ago
There's nothing wrong with continuous improvement but when you are trying to fine tune something in the flat portion of an exponential scale, and lets face it, even the most expensive bike shown here is 1/2 the burden of an ICE engine car, you have to ask yourself: is this optimisation really the core problem?
I argue: it's not. It's polishing. It's functionally a bit time-wast-y compared to reductions in the cost, and price of ebikes.
I tell you what I'd like as a bike rider: I'd like the post evergiven/covid supply chain behind my brake fluid fixed. It's insanely expensive to replace brakes and gears and wheels on a street bike these days: I ride a Movida 200 which is a pretty average, low end disc-brake unit with fluid breaklines, and I am up for a horrendous cost in parts to replace: the labour I can understand, this isn't a zero-work job. But the supply chain fragility in bicycles is truly scary: I paid twice the base cost of my (admitedly secondhand) bike, repairing it these last 2 years.
I know: I should learn to do this myself. I did once long ago last century take apart a sturmy-archer 3 speed hub gear, and remake it, and I did have no left over parts. Amazing. Some of the springs were like fairy-floss. Now, I have old person shakey hands and to be frank I'd rather pay a hipster to do it for me, but the parts cost is just obscene. I'm not paying his tattoo costs, this is some anonymous bike part warehouse in the cloud, which is ripping us all off worldwide.
- hammyhavoc 4y agoOh no, not his tattoo costs.
- samstave 4y agoThere is a bike shop in Marin that does some custom bike work, one of which is replacing these famous brakes which cost $1,500 PER brake, and one of the things he needs, which they dont manufacture any longer is a single washer that is specific to that brake - and since you cant get these parts any longer, the brakes are nuts expensive...
- Gigachad 4y agoLow Tech Magazine has always been more of an entertainment blog with creative and unusual solutions. Their stuff rarely seems to be practical or reasonable but it is a fascinating read anyway. >I paid twice the base cost of my (admitedly secondhand) bike, repairing it these last 2 years. Because the base price of a bike is just about nothing. So it makes sense that skilled labor quickly overtakes the cost. And you usually get a hefty discount on the price of the bike when you buy it second hand considering just about everything on the bike excluding the frame is a consumable item.
- midoridensha 4y agoWhat kind of weird brakes do you have on your bike? I can easily buy Shimano Ultegra (which is pretty high-end) brake calipers on Amazon for roughly USD$65, and a big bottle of brake oil is less than $15. Cheaper-brand or lower-end calipers are of course, cheaper, easily less than $50 each. And brake calipers aren't something you normally need to replace anyway. Pads are easily available too, both name-brand and Chinese knock-offs that probably last 1/3 as long for 1/10 the cost. What supply-chain problem are you referring to? I don't see any.
- mnky9800n 4y agoAlso I don't really understand what the difference between the tiagra and Ultegra brake levers are except in comparison to like bottom rung stuff. But to each other I can't seem to tell a difference.
- midoridensha 4y agoUltegra is better, of course :-) But you're making an invalid comparison: the real comparison is between Ultegra and 105. The two are functionally the same, but Ultegras are a bit lighter and use better materials (probably carbon fiber handles, for instance). The year I got mine, the 105s were physically larger too, so the internals weren't as advanced; not sure about today. Tiagra is a 10-speed shifter, while Ultegra is an 11-speed, so they're certainly not compatible at all. You can assume that Tiagra will be even more cheaply-made than the 105.
- schoen 4y ago> What kind of weird brakes do you have on your bike? Apparently hydraulics, instead of cables. Cf. https://www.bicyclehabitat.com/how-to/disc-brakes-101-pg362.htm https://www.bicyclehabitat.com/how-to/disc-brakes-101-pg362.... I have hydraulic brakes on one of my bikes too. They feel great (so accurate and responsive!), but I'm glad I haven't had to get them fixed yet...
- anotherboffin 4y agoYou should be able to stay away from most repairs if you check your brake pads regularly and make sure you change them before they fully wear out. In addition, do know that the discs and even brake fluid will need to be replaced at some point to keep things working well, hope this can avoid a bad surprise!
- paulcole 4y agoI paid about $1,000 for a steel-frame touring bike about 15 years ago. I commute/run errands for a few thousand miles a year on it. Every 2-3 years, I get it overhauled at a cost of about $500. Other than that, I’ve replaced wheels and tires a few times and break pads on average about once a year, plus the occasional random issue. So for me, the cost of maintenance quickly outpaced the cost of the bike. But it’s still a pittance compared to the cost of car ownership. I would say don’t learn to do maintenance yourself unless it’s something you enjoy. I enjoy riding my bike but hate tinkering with and fixing things. My bike is to get me around, not be a source of grief and annoyance.
- leemailll 4y agowhat kind of service cost you $500? that's pretty high unless you replace a lot stuff
- paulcole 4y agoShop near me is $275 for an overhaul: > We’ll take apart your bike piece by piece, overhaul the bearing systems and put it together again. Then we’ll perform a full-tune up, install new brake and shifting cables if needed, and give it a thorough cleaning. It’ll ride like new. http://gladysbikes.com/mechanical-service http://gladysbikes.com/mechanical-service I always tell them to just replace anything you’d replace if it was your bike. Generally after 3 years there’s something they replace like rebuilding a wheel or something. I’ve always been very happy with the service and value because other than light cleaning and oiling I don’t put any effort into maintaining my bike. The mechanic (same guy I’ve seen for the past decade) told me (in a backhanded compliment sort of way), “This is really a testament to how well a bike can hold up with no maintenance other than an overhaul every few years.”
- samstave 4y agoMikes bikes does a full service which is $500 - and yes bike techs have a lot of mechanical knowledge, like for example using various spacers to change the geometry to suit the riders body/grip/posture etc. And then for certain things you need multiple spacers, or you can only mate this handle-bar with this type of headset/stem etc... Bikes are fn awesome machines.
- gorjusborg 4y agoThe problem is the mindset behind the choices. You don't need disc brakes. You don't need carbon frames, or even aluminum ones. These things are marginally better performing than their predecessors, but we want things to get better and better forever. That is exactly what makes it unsustainable. We'd be better off settling for good and sustainable than best and unsustainable. That's all.
- harha 4y agoWell you don’t need disk brakes until you do when the car pops up in front of you. There’s a bunch of people who would gain more from losing weight than whatever the marketing department of the bike company tells them, but it’s great to have this choice. I’m having just as much fun cycling as I do reading up on the tech and tinkering with my bikes, that’s time I’m not spending on being interested in cars.
- gorjusborg 4y agoYeah, I agree. I don't think we should stop improving things, and I don't think we should stop leveraging solutions we have come up with. I would say, be honest with yourself about what you need and understand that you are making trades. Don't reward companies that want to push disc brakes (for instance) as a reason to ditch something that fits your purposes. It's easy to cherry pick scenarios where a piece of tech would save you over the alternative, but life is holistic. We can adapt. The first step is to decide that it is worth trying to.
- derbOac 4y agoI'm not going to vilify disc brakes because it's good to have choices and disc brakes are a good option. However, I've always had this hunch that if you were going to actually quantify the percent of times in which the stopping time difference between a rim brake and disc brake actually was the deciding factor in serious cycling accidents, my guess is it's very very very low. That is, my guess is the car appears so suddenly it doesn't matter what brake you have, or the accident would have overwhelmingly been best prevented by approaching the intersection differently to begin with, or it doesn't involve another vehicle at all, but instead involves loss of cyclist control. I guess it's not so much the disc brakes I take issue with, it's how new bike markets seem to lurch from one new component type to another so completely without serious weighing of actual costs and benefits in use. So you end up in this situation where new bikes all have disc brakes without rim brakes even being much of an option anymore. Even when people are interested in them and have legitimate reason, the dynamics of the bike market is such it pushes them away from it. I guess I feel like something is different about the current bike market compared to other markets I'm familiar with. It feels to me like there's this market pressure due to various factors (bike manufacturers, sellers, cycling community discussion dynamics) toward some form that's hyperoptimised for use cases that aren't realistic in general. Maybe this has always been the case -- the skinny tires of the 1980s were pushed using unrealistic theories and test conditions -- but my sense is it's getting worse overall.