3 ms·
There are FDM processes that go back down in Z direction - like printing multiple units on the same build plate one at a time. And in those situations you do ha
by kube-system 4y ago
There are FDM processes that go back down in Z direction - like printing multiple units on the same build plate one at a time. And in those situations you do have to be careful not to crash the print head into an already printed part.
- dale_glass 4y agoMost will print every copy at once, switching between them. It also often works better because doing small parts can overheat the plastic. Moving between copies lets things cool down.
- kube-system 4y agoIt can be useful for circumstances where you want to minimize (or even eliminate) retraction. I've done some cool prints in vase/spiralize mode with large nozzle sizes -- with zero seams, zero retractions, and zero moves over printed surfaces, you can get some really awesome looking prints. But anyway it was just an example of a scenario where the slicer might not have enough information to know how to not crash the print head.
- Kirby64 4y agoAlmost noone does this, though. But, even then, you have all the information you need in theory because you're putting down the plastic.
- kube-system 4y agoFDM slicers usually don't have the information about the dimensions of the print head. Yes, it is a rarely used feature that is only supported by some slicers, but I just mention it as an illustration of the similar issue that exists with CNC machining.