Yes, the cutoff would have worked had it been activated quickly enough. The failure is insidious though. a) When MCAS falsely activates, it only does so brief

Yes, the cutoff would have worked had it been activated quickly enough. The failure is insidious though. a) When MCAS falsely activates, it only does so briefly. Then, assuming the problem is that the AoA sensor is broken, it activates again every five seconds. This is very confusing as the problem appears to have resolved and then it comes back. b) During initial climb, other parts of the speed trim system are normally working and the trim wheel is turning and clacking with no input from the pilot. If not for the big pitch down, the extra MCAS inputs would not be otherwise noticeable. c) The pilots had no way of knowing that MCAS even existed, because all references to it were deleted from the flight manual, so they had no way of being ready for such a set of circumstances. d) After MCAS has activated a couple of times, if you then recognize a problem and flip the trim cutoff, you lose the manual electric trim as well, and the trim is so nose down that you don't have the physical strength to turn the trim wheels. If you turn the trim cutoff back on to try to recover control, MCAS will hit you again. e) The procedure on previous versions of the 737 for dealing with a plane so out of trim that you couldn't turn the wheel was to pitch down even more to unload the stabilizer and then crank the trim wheel, but this procedure was also deleted from the flight manual, I believe as of the 737 Classic series.